|
|
|
|
|
NEFF puch za50 oil injection block-off plug
|
HERE NOW!!
|
|
|
NEW puch za50 aluminum oil injection block off plug! very fancy with the PUCH logo engraved in it.
|
|
|
|
|
|
|
|
puch e50 one speed seal set
|
HERE NOW!!
|
|
|
3 seals for rebuilding puch e50 engines.
|
|
|
|
|
|
|
|
puch E50 one speed complete 4 bearings + 3 seals
|
|
three 6203 C3 bearings and one 6203 NR snap ring bearing and three e50 green seals
|
|
|
|
|
|
|
|
HPI CDI mini rotor ignition system for puch tomos sachs and derbi
|
HERE NOW!!
|
|
|
new HPI CDI mini rotor ignition for ALL puch mopeds, E50 - ZA50 whatever ya got. so this new mini external rotor is actually lighter than the HPI internal rotor!
features built in lights for direct light hook up with no problemos.
this ignition is compatible with all puch, sachs 505, tomos a35/a55, kreidler, zundapp, batavus, derbi variant, derbi GPR. all derbi 4 speed engines like coppa, c4, FDS, FD, FDX, savannah, diablo and on and on! !!
|
|
|
|
|
|
|
|
puch & tomos black 50% crush exhaust gasket
|
HERE NOW!!
|
|
|
highest quality exhaust gasket known to all species of the world. for puch + tomos + garelli NOI mopeds!
crushin for sure
|
|
|
|
|
|
|
|
VITON complete seal set for puch E50!!!!
|
HERE NOW!!
|
|
|
VITON seal set for rebuilding your puch e50!
you get a set of 3 super high quality seals to help your motor last as long as possible!
|
|
|
|
|
|
|
|
bing carburetor top n float bowl gasket set for 12mm 14mm and 15mm
|
|
HERE NOW!
set includes top and float bowl gasket.
|
|
|
|
|
|
|
|
bing carburetor puch moped TOP GASKET for 12mm 14mm and 15mm
|
HERE NOW!!
|
|
|
for bing carburetors 12mm through 17mm found on most all puch mopeds and other strange two stroke lawnmowers and such.
|
|
|
|
|
|
|
|
100% authentic OEM round bing TOP CAP gasket
|
HERE NOW!!
|
|
|
OEM replacement top cap gasket for round bing carburetors 12mm-15mm!!
puch part # 349.1.150291
|
|
|
|
|
|
|
|
puch round bing carburetor top cap GASKET - 1mm thick
|
HERE NOW!!
|
|
|
bing carburetor top gasket 1mm THICK edition!! you asked for it, so we GOT IT.
for bing carburetors 12mm through 15mm found on most all puch mopeds and other strange two stroke lawnmowers and such.
|
|
|
|
|
|
|
|
bing carburetor float bowl gasket - fiber version
|
HERE NOW!!
|
|
|
for bing carburetors 12mm through 17mm found on most all puch mopeds and other strange two stroke lawnmowers and such.
|
|
|
|
|
|
|
|
puch 70cc 45mm treat KIT for the people - version I
|
HERE NOW!!
|
|
|
7 port puch 70cc cylinder kit including cylinder, piston, ring, wrist pin and clips.
version 1!
|
|
|
|
|
|
|
|
the puch maxi PETCOCK EXPERIENCE
|
|
HERE NOW!
take a perilous journey through different petcocks, 3/16" (5mm) fuel line and karcoma fuel filter!!
choose your path and end up in a destination beyond your wildest dreams...
|
|
|
|
|
|
|
|
100% authentic OEM bing float bowl gasket n fuel inlet gaskets - version #1
|
HERE NOW!!
|
|
|
OEM gasket set for the round bing carburetors we love so much. for 12mm - 17mm round bings!!
|
|
|
|
|
|
|
|
100% authentic OEM bing float bowl gasket n fuel inlet gaskets version #2
|
HERE NOW!!
|
|
|
OEM gasket set for the round bing carburetors we love so much. for 12mm - 17mm round bings!!
version #2 features only one copper gasket and a mysterious foam ring
|
|
|
|
|
|
|
|
100% authentic OEM bing float bowl gasket ONLY
|
HERE NOW!!
|
|
|
OEM float bowl gasket for the round bing carburetors we love so much. for 12mm - 17mm round bings!!
|
|
|
|
|
|
|
|
100% authentic OEM bing rubber cable adjuster cover
|
HERE NOW!!
|
|
|
OEM rubber cable / cable adjuster cover for the round bing carburetors we love so much. for 12mm - 17mm round bings!! fits other bing carbs as well i would imagine.
|
|
|
|
|
|
|
|
puch moped lightened unstuffed race crankshaft
|
HERE NOW!!
|
|
|
performance race crank for puch e50 engines unstuffed!
|
|
|
|
|
|
|
|
puch rito race crankshaft
|
HERE NOW!!
|
|
|
Performance race crank for puch e50 one speed engines by Rito.
pretty much one of the strongest and best choices for puch cranks with zero complications.
|
|
|
|
|
|
|
|
puch E50 moped super stuffy racer crankshaft
|
HERE NOW!!
|
|
|
this is our custom made super stuffy racing performance crankshaft for E50 puch engines. aluminum stuffed, this is the upgraded version of our previous kevlar stuffed crank.. unlike our previous stuffed crank, this one hails from other worlds and is blessed by a real magician before being shipped out. best quality con rod we could find featuring dual lubrication holes on the wrist pin side for the needle bearing and wrist pin to get proper lubrication at 16,000 rpms! if you're reving out on your kickstand. best quality silver needle bearings used. standard bearings and seals fit right on perfecto, all dreamy. this crankshaft beats all others, for performance and price. no question. any questions?
|
|
|
|
|
|
|
|
puch E50 super stuffy crankshaft + seals + bearings PARTY TIME
|
|
HERE NOW! super stuffy crankshaft for puch E50 one speed engines. + + +
check within for many bearing and seal options!! we have a party pack that will fit YOUR budget GURANTEED
= RAD TIMES
|
|
|
|
|
|
|
|
magik eagle power 80mm brake shoes for leleu & honda hobbit rear
|
HERE NOW!!
|
|
|
CHRISTMAS CAME EARLY!! what you've always known and loved is back but new and improved for 2019...
magik stopping powers. hi quality. low price. magik eagle power
80mm x 18mm - always measure to be sure you're getting the right brakes!
|
|
|
|
|
|
|
|
puch black pipe
|
HERE NOW!!
|
|
|
the one and only. the heavy hitter, light on the wallet, flat port good-on-any-kit pipe. back, and improved bracketry for all of you out there in dot tv land
|
|
|
|
|
|
|
|
puch magnum pedal crank shaft - 260mm
|
HERE NOW!!
|
|
|
use this to get around any pesky things in your way, you know pipes and such.
this will work on any puch (except pinto, swinger and cobra) if you need some extra clearance (or just want to use different pedal arms), and is the stock length for magnums. this is the closest fit for hobbit/pa50/camino, but make your own decision if it will work for you.
260mm long
|
|
|
|
|
|
|
|
puch 70cc airsal cylinder kit - 45mm
|
HERE NOW!!
|
|
|
surprisingly similar to something i've seen before, i can't quite place it tho, maybe it's just de ja voo.
voodoo macho
|
|
|
|
|
|
|
|
puch 65cc airsal cylinder kit - 44mm
|
HERE NOW!!
|
|
|
puch airsal 65cc 44mm kit, for puch mopeds. yes.
|
|
|
|
|
|
|
|
puch moped polini 64cc cylinder kit
|
HERE NOW!!
|
|
|
the famed polini kit for puch
|
|
|
|
|
|
|
|
puch bosch style external ignition coil
|
HERE NOW!!
|
|
|
ht coil for your bosch points ignition! identical to those found on ALL puch mopeds, plus many sachs, batavus, solo, etc! ! !
center to center of mounting holes - 53mm
|
|
|
|
|
|
|
|
puch radical SIDEBLEED estoril performance pipe + adjustable end bleed!!!!!!
|
HERE NOW!!
|
|
|
now in sidebleed!!!!!!!!!!
sidebleed estoril, he's so hot right now, sidebleed estoril
|
|
|
|
|
|
|
|
puch e50 jammer clutch version v6.4
|
HERE NOW!!
|
|
|
version 6.4!!! lighter and stronger for 2019! featuring cast,
pre-chamfered clutch pads versus the old roll pinned multi layer pads of
the past.
jammin party time
|
|
|
|
|
|
|
|
puch vdo 80MPH speedometer
|
HERE NOW!!
|
|
|
the time is nigh my friends. we have risen from the dark days. it's is tis the dawn of the brand new 80mph speedometer. buckle up, your journey begins here. simply extract your lousy original 30mph speedo you've pinned time after time and insert this new magnificent sleek black device, using the same speedo cable, housing, and prepare for the ultimate truth. tested and approved. 1 mile on it, ready for your new blast machine. remember where you were when it dropped
|
|
|
|
|
|
|
|
genuine UNION puch magnum style moped pedals
|
HERE NOW!!
|
|
|
9/16" stock-like pedals for puch magnum + tons of other bikes!!
genuine UNION brand! high quality!
|
|
|
|
|
|
|
|
universal SINGLE speedo holder - for 60mm speedos
|
HERE NOW!!
|
|
|
speedometer holder..a home for your speedo to live in
|
|
|
|
|
|
|
|
universal DOUBLE speedo holder with ignition SWITCH
|
HERE NOW!!
|
|
|
radical double cockpit assembly for your fighter jet
featuring on / off / ejection seat switch positions
|
|
|
|
|
|
|
|
puch vdo style 40MPH speedometer - two speed style GREEN n ORANGE
|
HERE NOW!!
|
|
|
oooo fresh from the oven at la boulangetrieat is a beautiful PUCH two speedo vdo style speedometer! just like the original 30mph version, but crafted with advanced technologies allowing it to read up to 40mph! simply amazing.
|
|
|
|
|
|
|
|
mike thomas puch 5 star FRONT disc conversion PACK - BLACK
|
|
HERE NOW! mike thomas of arizona developed and created a NEW NEW NEWWWW front disc brake set up with custom machined hub for the puch 5 star mag wheel!
this time the hub is in BLK !!!
|
|
|
|
|
|
|
|
honey, i shrunk the puch speedometer - 48mm - 60mph
|
HERE NOW!!
|
|
|
aw man, not again! well, its back but smaller. 48mm to be exact in diameter
works
with the
puch speedo cable and puch speedo drive but maybe more. has the
quintessential green orange and red colors along the dial to make sure
you know when you are speeding in the DANGERZONE
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoes - 80x18 (puch)
|
HERE NOW!!
|
|
|
the ABSOLUTE FINEST brake pads in the known galaxy have finally landed!!!!
featuring groovy high-tech slots to wick away water, dirt, dust, debris, beer, etc or whatever else might get in the way of you and what lies ahead.
these are best for most puch spoke wheels front n rear, puch 5 stars f / r, most peugeot and motobecane spoke wheels, honda hobbit rear spoke and more...
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoes - 90x18 (circle type)
|
*sorry none today*
|
|
|
the ABSOLUTE FINEST brake pads in the known galaxy have finally landed!!!!
featuring groovy high-tech slots to wick away water, dirt, dust, debris, beer, etc or whatever else might get in the way of you and what lies ahead.
for puch snowflake FRONT!! maybe others toooo
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - puch SPOKE / 5 STAR
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for puch spoke wheels and puch 5 star mag wheels including:
- puch maxi, maxi S, maxi N - puch newport, newport L - puch magnum, magnum mkii, magnum ii, magnum ltd - puch dart - puch cobra - puch AD autro daimler - sears free spirit - jcpenny pinto, pinto 2, swinger, swinger 2
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - puch SNOWFLAKE
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for puch SNOWFLAKE mags including:
- puch sport, sport mkii with snowflakes - puch silver magnum mkii with snowflakes
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - kreidler
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for spokes and 5-star mag wheels including:
1977-1980 Kreidler MP9 leleu spoke wheels 1978-1980 Kreidler MP19 Flory 5-star mags
|
|
|
|
|
|
|
|
puch E50 super STROKER crank!!! - 44mm stroke
|
HERE NOW!!
|
|
|
the same super stuffy crankshaft for puch e50 that you've known and loved for years has just gotten a major upgrade!! a longer 44mm stroke!!! that's 1mm longer than the stock puch stroke in case ya didn't know.
|
|
|
|
|
|
|
|
NOS CEV speedo holder for 60mm speedos - WITH key switch hole
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
super rad nos cev single speedo holder!! great for custom builds, cafe racers, etc. plastic housing construction with metal brackets. could just magically bolt on top of your handlebar clamps? very sleek, very minimal
|
|
|
|
|
|
|
|
NOS CEV speedo holder for 60mm speedos - WITH indicator light holes
|
$49.99 alternate reality price $34.99
HERE NOW!!
|
|
|
super rad nos cev single speedo holder!! great for custom builds, cafe racers, etc. has two spots for indicator lights!! the right side has a blue indicator assembly in there!
|
|
|
|
|
|
|
|
NOS CEV speedo holder for 60mm speedos - BLANK
|
$49.99 alternate reality price $32.99
HERE NOW!!
|
|
|
super rad nos cev single speedo holder!! great for custom builds, cafe
racers, etc. has two spots for indicator lights!! the right side has a blue indicator assembly in there!
these ones are totally un-drilled!! a blank canvas for you!
|
|
|
|
|
|
|
|
NOS puch MAXI pedal crank shaft - 220mm - 28t
|
HERE NOW!!
|
|
|
new old stock puch maxi pedal shaft originally found on maxi ii and maxi
mk/ii! that means it works with a za50 as well as an e50.
puch part # 321.3.42.601.0
|
|
|
|
|
|
|
|
puch e50 STROKER crank + seals + bearings PARTY
|
|
HERE NOW! 44mm super stroker crankshaft for puch E50 one speed engines + two crank bearings + full seal set + 0.5mm base spacer!
everything you need to make a RIPPING stroked e50 setup!! the only other items you may need are some base gaskets to adjust the final squish!! it's as easy as using a standard 43mm stroke crank but ya get more displacement and POWER.
YES, you can use this on ANY E50 setup. fun + entertainment for these miserable times.
|
|
|
|
|
|
|
|
treatland's PURPLE POWER extreme stopping brake shoes - 80x18 puch leleu
|
HERE NOW!!
|
|
|
a new LEVEL has been achieved in braking technology. the treatland
PURPLE power series pads are here! make the most outta those crappy
stock moped brakes with an impressive 20% increase in stopping power
over traditional friction materials.
these are best for most puch spoke wheels front n rear, puch 5 stars f / r, most peugeot and motobecane spoke wheels, honda hobbit rear spoke and more...
|
|
|
|
|
|
|
|
treatland's PURPLE POWER extreme stopping brake shoes - 80x18 puch leleu SPOKE / 5 STAR
|
|
ADD TO CART TO CHECK STOCK!
a new LEVEL has been achieved in braking technology. the treatland
PURPLE power series pads are here! make the most outta those crappy
stock moped brakes with an impressive 20% increase in stopping power
over traditional friction materials.
for puch spoke wheels and puch 5 star mag wheels including:
- puch maxi, maxi S, maxi N - puch newport, newport L - puch magnum, magnum mkii, magnum ii, magnum ltd - puch dart - puch cobra - puch AD autro daimler - sears free spirit - jcpenny pinto, pinto 2, swinger, swinger 2
|
|
|
|
|
|
|
|
puch 70cc airsal cylinder kit - 45mm - OLD style fins
|
HERE NOW!!
|
|
|
the puch airsal 70cc 45mm kit, for puch mopeds. yes.
old style fin edition!!
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 121
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 121 type aka 7121
LEFT side application 2.0mm x 2.0mm cable tip 11mm axle 18:10 ratio m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 408
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 408 type aka 7408
LEFT side application 1.8mm x 1.8mm cable tip 11mm axle 16:10 ratio m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 543
|
$49.99 alternate reality price $39.99
*sorry none today*
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 543 type aka 7543
LEFT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 508
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 508 type aka 7508
RIGHT side application 2.50mm x 2.50mm cable tip 15mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 456
|
$49.99 alternate reality price $39.99
*sorry none today*
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 456 type aka 7456
LEFT side application 2.00mm x 2.00mm cable tip 12mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 441
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 441 type aka 7441
RIGHT side application 2.00mm x 2.00mm cable tip 12mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 429
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 429 type aka 7429
RIGHT side application 2.00mm x 2.00mm cable tip 12mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 419
|
$49.99 alternate reality price $39.99
*sorry none today*
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 419 type aka 7419
LEFT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 403
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 403 type aka 7403
RIGHT side application 2.50mm x 2.50mm cable tip 12mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 402
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 402 type aka 7402
RIGHT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 375
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 375 type aka 7375
RIGHT side application 2.00mm x 2.00mm cable tip 12mm axle INTERNAL speedo cable threading is coarse thread 5mm
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 373
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 373 type aka 7373
RIGHT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 332
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 332 type aka 7332
LEFT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 303
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 303 type aka 7303
LEFT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 221
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 221 type aka 7221
LEFT side application 2.0mm x 2.0mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 278
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 278 type aka 7278
RIGHT side application 2.5mm x 2.5mm cable tip 12mm axle m10 x 1.00
|
|
|
|
|
|
|
|
NOS VEGLIA speedometer drive - 50-1252
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL VEGLIA speedometer drive!!! this is the 50-1252 type aka 750-1252
RIGHT side application 2.50mm x 2.50mm cable tip 12mm axle INTERNAL speedo cable threading is coarse thread 5mm
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 324
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 324type aka 7303
LEFT side application 2.00mm x 2.00mm cable tip 11mm axle m10 x 1.00
|
|
|
|
|
|
|
|
puch e50 jammer clutch KICKSTART adapter plate
|
HERE NOW!!
|
|
|
NEW puch e50 KICKSTART adapter plate for the jammer clutch!!
|
|
|
|
|
|
|
|
NOS CEV headlight cowl and 60mm speedo holder
|
$49.99 alternate reality price $37.99
HERE NOW!!
|
|
|
super rad nos cev single speedo holder and headlight cowl!! This came on so many bikes back in the day.
CEV part number: 19804
|
|
|
|
|
|
|
|
NOS puch pedal crank RED grease nipple
|
HERE NOW!!
|
|
|
new old stock puch grease nipple! goes in the end of the crank so you can pump it full of grease!
puch part # 360.1.40.011.1
|
|
|
|
|
|
|
|
NOS puch bosch external ignition coil wire boot
|
HERE NOW!!
|
|
|
nos oem bosch wire boot for external ignition coil for 6 volt bosch ignitions that came on puch and batavus mopeds!
puch part # 902.0745 oem bosch part number: 2 200 522 002
|
|
|
|
|
|
|
|
NOS oem puch BERU external ignition coil PLUG wire boot
|
HERE NOW!!
|
|
|
NOS oem bosch wire boot aka "protection cap" for external ignition coil
for 6 volt bosch ignitions that came on puch and batavus mopeds!
this is the larger boot that goes around the plug wire!
puch part # 700.1.09.006.1 bosch part # 1 230 522 011
|
|
|
|
|
|
|
|
puch MEGA bullet exhaust - BLACK
|
$188.99 alternate reality price $164.99
HERE NOW!!
|
|
|
new puch mega bullet flat port exhaust!!! hmmmm....kinda looks like something i've seen before...very similar to the Homoet 6p and treat pipe!!!
|
|
|
|
|
|
|
|
wicked curve complete CDI ignition kit for puch e50 / za50
|
|
HERE NOW!!
wicked curve gets its own cdi!!!
beyond OEM quality wicked curve for puch e50 / za50 / z50 cdi kit with options for AC or DC
|
|
|
|
|
|
|
|
puch maxi 26t pedal crank shaft - 230mm
|
*sorry none today*
|
|
|
chrome pedal shaft for puch maxi, newport, etc!!
230mm long
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 16 10
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
LEFT side application 2.0mm x 2.0mm cable tip 11mm axle 16:10 ratio m10 x 1.00
|
|
|
|
|
|
|
|
NOS VEGLIA speedometer drive - 50-1026
|
HERE NOW!!
|
|
|
new old stock ORIGINAL VEGLIA speedometer drive!!! this is the 50-1026
LEFT side application 2.00mm x 2.00mm cable tip 11mm axle INTERNAL speedo cable threading is coarse thread 5mm
|
|
|
|
|
|
|
|
USED CEV headlight cowl and 60mm speedo holder
|
$34.99 alternate reality price $18.99
HERE NOW!!
|
|
|
super rad USED cev single speedo holder and headlight cowl!! This came on so many bikes back in the day.
CEV part number: 19804
|
|
|
|
|
|
|
|
NOS peugeot VEGLIA speedometer drive - FROZEN
|
$24.99 alternate reality price $14.99
HERE NOW!!
|
|
|
new old stock ORIGINAL VEGLIA speedometer drive for peugeot!!
***this
is in good shape but it is FROZEN! if you have the patience and skill
to fix it, you will be rewarded with a working drive. wow!***
peugeot part # 46709
|
|
|
|
|
|
|
|
wicked curve complete CDI ignition kit for puch e50 / za50 - DC version
|
|
HERE NOW!!
wicked curve gets its own cdi!!!
beyond OEM quality wicked curve for puch e50 / za50 / z50 cdi kit
DC version!
|
|
|
|
|
|
|
|
SRS polyurethane fin dampers for puch polini
|
HERE NOW!!
|
|
|
SRS performance polyurethane fin dampers for puch polini kit!
these cut down on some of the ringing / whacko harmonics that resonate through the cooling fins.
|
|
|
|
|
|
|
|
NOS peugeot VEGLIA speedometer drive
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock ORIGINAL VEGLIA speedometer drive for peugeot!!
these are NOT frozen and spin freely! you'll probably wanna try and get some lube in there before running it.
peugeot part # 46709
|
|
|
|
|
|
|
|
USED peugeot VEGLIA speedometer drive
|
$39.99 alternate reality price $26.99
HERE NOW!!
|
|
|
used ORIGINAL VEGLIA speedometer drive for peugeot!!
these are NOT frozen and spin freely! you'll wanna clean it and get some lube in there before running it.
peugeot part # 46709
|
|
|
|
|
|
|
|
NOS CEV speedometer drive - 564
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock ORIGINAL cev speedometer drive!!! this is the 564 type aka 7564
RIGHT side application 2.5mm x 2.5mm cable tip 12mm axle m10 x 1.00
|
|
|
|
|
|
|
|
GUIA universal dash with 120kmh speedometer and ignition key
|
*sorry none today*
|
|
|
super rad universal single speedo dash with ignition switch and high beam / low beam indicators!! kinda reminds me of the stock sachs G3 dash!
|
|
|
|
|
|
|
|
puch grimeca 5 star REAR disc conversion PACK
|
|
HERE NOW!
NEW NEW NEWWWW rear disc brake set up with custom machined hub for the puch 5 star mag wheel!
|
|
|
|
|
|
|
|
puch grimeca 5 star REAR disc conversion PACK with rim
|
|
HERE NOW!
NEW NEW NEWWWW rear disc brake set up with custom machined hub for the puch 5 star mag wheel!
|
|
|
|
|
|
|
|
puch gilardoni 74cc head
|
*sorry none today*
|
|
|
puch 74cc gilardoni super hi comp, original head! did i mention that this is the original head? yes it is!
|
|
|
|
|
|
|
|
puch 45mm O-RING high compression head
|
|
HERE NOW! 45mm O-RING high compression 70cc head for puch maxi magnum pinto free spirit kromag swinger dart tomos yamaha chappy whaaaattttttt!!!
|
|
|
|
|
|
|
|
puch 38mm O-RING high compression head
|
|
HERE NOW! 38mm O-RING high compression 50cc head for puch maxi magnum pinto free spirit kromag swinger dart tomos yamaha chappy whaaaattttttt!!!
|
|
|
|
|
|
|
|
custom cut 45mm O-RING high compression head - for TREAT REED - COUNTERSUNK!!! - AIRSAL STYLE - SUPER STREET
|
|
HERE NOW! custom cut countersunk 45mm o-ring head specifically machined to match the dome profile of the puch treat reed kit!!
re-profiled squish in super street flavor for the devoted ripper. this one is made from an airsal head
but machined for treat reed so you can get the big old fins and better
cooling if the airsal is what you prefer!
|
|
|
|
|
|
|
|
custom cut 45mm O-RING high compression head - for TREAT REED - COUNTERSUNK!!! - GILA STYLE
|
|
HERE NOW! custom cut countersunk 45mm o-ring head specifically machined to match the dome profile of the puch treat reed kit!!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider. made from a gilardoni head but machined for treat reed so you can get the big old fins and better cooling if the gila head is what you prefer!
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH HERO KIT - super street
|
HERE NOW!!
|
|
|
custom cut head specifically designed to match the squish of a puch hero kit! bigger fins for cooling as well!
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression O-RING head - for PUCH POLINI - super street
|
|
HERE NOW! custom cut squish 43.5mm head specifically machined to match the dome profile of the puch polini piston!
this one is cut to super street specs meaning it has a pinch more compression and is more suited for your super ripper setup!
o-ring version
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression O-RING head - for PUCH metra 65 - super street
|
|
HERE NOW! custom cut squish 43.5mm head specifically designed for the puch 65 metra piston!
that's right, the squish angle is is perfectly cut for the metrakit piston dome!
this version is o-ring AND super street for slightly higher compression and better sealing
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH POLINI - sport touring - AIRSAL STYLE
|
HERE NOW!!
|
|
|
custom cut squish 43.5mm head specifically machined to match the dome profile of the puch polini piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH POLINI! - super street
|
HERE NOW!!
|
|
|
custom cut squish 43.5mm head specifically designed for the puch polini piston! that's right, the squish angle is is perfectly cut for the polini piston dome!
this one is cut to super street specs meaning it has a pinch more compression and is more suited for your super ripper setup!
|
|
|
|
|
|
|
|
custom cut 44mm high compression head - for PUCH 44mm AIRSAL - super street
|
HERE NOW!!
|
|
|
custom cut squish head specifically machined to match the dome profile of the puch 44mm airsal piston!
|
|
|
|
|
|
|
|
custom cut 45mm O-RING high compression head - for puch PISTON PORT treat kit!! - super street
|
|
HERE NOW! custom cut squish 45mm o-ring head specifically designed for the puch treat kit piston! i looooove those pp kits yo
this one is cut to super street specs meaning it has a pinch more compression and is more suited for your super ripper setup!
|
|
|
|
|
|
|
|
custom cut 45mm high compression head - for PUCH 45mm AIRSAL - super street
|
*sorry none today*
|
|
|
custom cut squish head specifically machined to match the dome profile of the puch 45mm airsal piston!
this one is cut to super street specs meaning it has a pinch more compression and is more suited for your super ripper setup!
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH metra 65 - sport touring
|
HERE NOW!!
|
|
|
custom cut squish 43.5mm head specifically designed for the puch 65 metra piston!
that's right, the squish angle is is perfectly cut for the metrakit piston dome!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
custom cut 45mm high compression head - for PUCH 45mm AIRSAL - sport touring
|
HERE NOW!!
|
|
|
custom cut squish head specifically machined to match the dome profile of the puch 45mm airsal piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
custom cut 44mm high compression head - for PUCH 44mm AIRSAL - sport touring
|
HERE NOW!!
|
|
|
custom cut squish head specifically machined to match the dome profile of the puch 44mm airsal piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH POLINI! - sport touring
|
HERE NOW!!
|
|
|
custom cut squish 43.5mm head specifically designed for the puch polini piston! that's right, the squish angle is is perfectly cut for the polini piston dome!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
custom cut 45mm high compression head - for puch PISTON PORT treat kit!! - sport touring
|
HERE NOW!!
|
|
|
custom cut squish 45mm o-ring head specifically designed for the puch treat kit piston! i looooove those pp kits yo
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH HERO KIT - sport touring
|
HERE NOW!!
|
|
|
custom cut head specifically designed to match the squish of a puch hero kit! bigger fins for cooling as well!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 45mm head for the TCCD kit - airsal style - SPORT TOURING
|
HERE NOW!!
|
|
|
custom cut squish 45mm head specifically machined to match the dome profile of the tccd piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 45mm head for the TCCD kit - airsal style - SUPER STREET
|
HERE NOW!!
|
|
|
custom cut squish 45mm head specifically machined to match the dome profile of the tccd piston!
this one is cut to super street specs meaning it has high compression and is more suited for racing and ripper builds!
|
|
|
|
|
|
|
|
treats puch 15mm bing intake
|
HERE NOW!!
|
|
|
remember the old days? rtv, beer can shims, over-tightening the clamp, carbs falling off down the till into the river...WELL....
#1 GRANDPA has arrived! just a good ol' intake that does the job, heck it exceeds expectations in price and quality. dont take my word for it, let your engine do the talkin!
If you have been disappointed in all the 15mm bing intakes in your life then #1 grandpa is waiting to come and meet you and spend the rest of your life living with you.
|
|
|
|
|
|
|
|
custom cut 45mm head for the TCCD kit - O RING version - SPORT TOURING
|
|
HERE NOW! custom cut squish 45mm head specifically machined to match the dome profile of the tccd piston! o-ring sealin version!!!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 45mm head for the TCCD kit - SPORT TOURING
|
*sorry none today*
|
|
|
custom cut squish 45mm head specifically machined to match the dome profile of the tccd piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 38mm head for the TCCD kit - O RING version - SPORT TOURING
|
|
HERE NOW! custom cut squish 38mm head specifically machined to match the dome profile of the tccd piston! o ring sealin version!!!!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 38mm head for the TCCD kit - O RING version - SUPER STREET
|
|
HERE NOW! custom cut squish 38mm head specifically machined to match the dome profile of the tccd piston! o ring sealin version!!!!
this one is cut to super street specs meaning it has high compression and is more suited for racing and ripper builds!
|
|
|
|
|
|
|
|
custom cut 45mm head for the TCCD kit - SUPER STREET
|
HERE NOW!!
|
|
|
custom cut squish 45mm head specifically machined to match the dome profile of the tccd piston!
this one is cut to super street specs meaning it has high compression and is more suited for racing and ripper builds!
|
|
|
|
|
|
|
|
custom cut 38mm head for the 50cc treat kit - SUPER STREET
|
HERE NOW!!
|
|
|
custom cut squish 38mm head specifically machined to match the dome profile of the 50cc treat kit!!! probably an upgrade on the stock head too!!
this one is cut to super street specs meaning it has high compression and is more suited for racing and ripper builds!
|
|
|
|
|
|
|
|
custom cut 38mm head for the 50cc treat kit - SPORT TOURING
|
HERE NOW!!
|
|
|
custom cut squish 38mm head specifically machined to match the dome profile of the 50cc treat kit!!! probably an upgrade on the stock head too!!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 47mm high compression head - for 74cc GILARDONI kit - SUPER STREET
|
*sorry none today*
|
|
|
custom cut 47mm head specifically designed for the puch GILA kit. that's right!
this one is cut to super street specs meaning it has a pinch more compression and is more suited for your ripper!
want a lil less compression? slap a slightly thicker base gasket on
there!! want more compression? slap a slightly thinner base gasket on
there!
either way you are going to rippp!
|
|
|
|
|
|
|
|
custom cut 47mm high compression head - for 74cc GILARDONI kit - SPORT TOURING
|
HERE NOW!!
|
|
|
custom cut 47mm head specifically designed for the puch GILA kit. that's right!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
want a lil less compression? slap a slightly thicker base gasket on
there!! want more compression? slap a slightly thinner base gasket on
there!
either way you are going to rippp!
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression O-RING head - for PUCH POLINI! - SUPER STREET
|
|
HERE NOW! custom cut squish 43.5mm head specifically machined to match the dome profile of the puch polini piston!
o-ring version
|
|
|
|
|
|
|
|
custom cut 45mm O-RING high compression head - for TREAT REED - COUNTERSUNK!!! - super street
|
|
HERE NOW! custom cut countersunk 45mm o-ring head specifically machined to match the dome profile of the puch treat reed kit!!
re-profiled squish in super street flavor for the devoted ripper
|
|
|
|
|
|
|
|
custom cut 45mm O-RING high compression head - for TREAT REED - COUNTERSUNK!! - sport touring
|
|
HERE NOW! custom cut countersunk 45mm o-ring head specifically machined to match the dome profile of the puch treat reed kit!!
re-profiled squish in sport touring flavor for the devoted daily rider
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression head - for PUCH HERO KIT on a TOMOS- super street
|
HERE NOW!!
|
|
|
custom cut head specifically designed to match the squish of a puch hero kit on a tomos! bigger fins for cooling as well!
|
|
|
|
|
|
|
|
custom cut 45mm head for the TCCD kit - O RING version - SUPER STREET
|
|
HERE NOW! custom cut squish 45mm head specifically machined to match the dome profile of the tccd piston! o-ring sealin version!!!
this one is cut to super street specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 43.5mm high compression O-RING head - for PUCH POLINI! - sport touring
|
|
HERE NOW! custom cut squish 43.5mm o-ring head specifically designed for the puch polini piston! that's right, the squish angle is is perfectly cut for the polini piston dome!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
batavus m48 custom cut COUNTERSUNK head - SUPER STREET
|
HERE NOW!!
|
|
|
custom cut squish 40mm head
specifically machined to match the dome profile of the stock batavus
laura m48 piston!! this baby is countersunk an impressive 2.8mm to make
up for the massive squish that the m48 has stock!
this one is cut to super street specs meaning it has high compression and is more suited for racing and ripper builds!
|
|
|
|
|
|
|
|
custom cut 44mm high compression head - for PUCH 44mm AIRSAL - super street - AIRSAL STYLE
|
HERE NOW!!
|
|
|
custom cut squish head specifically machined to match the dome profile of the puch 44mm airsal piston! plus bonus cooling!
|
|
|
|
|
|
|
|
batavus m48 custom cut COUNTERSUNK head - SPORT TOURING
|
HERE NOW!!
|
|
|
custom cut squish 40mm head
specifically machined to match the dome profile of the stock batavus
laura m48 piston!! this baby is countersunk an impressive 2.8mm to make
up for the massive squish that the m48 has stock!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.
|
|
|
|
|
|
|
|
batavus m48 motomatic 43.5mm custom cut COUNTERSUNK head - SPORT TOURING
|
HERE NOW!!
|
|
|
custom cut squish 43.5mm head specifically machined to match the dome profile of the converted morini 43.5mm kit for batavus!!!!! this baby is countersunk an impressive 2.8mm to make up for the massive squish that the m48 has stock!
|
|
|
|
|
|
|
|
custom cut 38mm head for the TCCD kit - SPORT TOURING
|
HERE NOW!!
|
|
|
custom cut squish 38mm head specifically machined to match the dome profile of the tccd piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
custom cut 38mm head for the TCCD kit - SUPER STREET
|
HERE NOW!!
|
|
|
custom cut squish 38mm head specifically machined to match the dome profile of the tccd piston!
this one is cut to super street specs meaning it has high compression and is more suited for racing and ripper builds!
|
|
|
|
|
|
|
|
custom cut 45mm high compression airsal head - for PUCH 45mm AIRSAL - sport touring
|
HERE NOW!!
|
|
|
custom cut squish 45mm head specifically machined to match the dome profile of the 45mm puch airsal piston!
this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider!
|
|
|
|
|
|
|
|
bing jets for puch mopeds
|
|
HERE NOW! click to check available sizes.
for bing carburetors as found on puch and solo mopeds!
NOW AVAILABLE IN ODD SIZES!!!?!>!>!
|
|
|
|
|
|
|
|
OEM puch 3 shoe adjustable clutch with super stiffy springs
|
*sorry none today*
|
|
|
new OEM original NOS and more, the power of threes is evident
|
|
|
|
|
|
|
|
puch moped 65cc "metrakit" cylinder kit
|
HERE NOW!!
|
|
|
puch 65cc nikasil cylinder kit new in box!!
no longer an aluminum cylinder with a cast iron sleeve but an aluminum cylinder covered with nikasil inside it for the piston to just slip right through! yes!
|
|
|
|
|
|
|
|
puch moped crankshaft UNSTUFFED + seals + bearings party
|
|
HERE NOW! unstuffed crank WITH seals and 6203 + 6203NR
party rules
|
|
|
|
|
|
|
|
puch 70cc treat kit for the people + head party - version I
|
$126.00 alternate reality price $110.00
|
|
|
version 1 70cc kit + 70cc head + gaskets = party!
|
|
|
|
|
|
|
|
puch 3 shoe E50 KICKSTART clutch
|
*sorry none today*
|
|
|
real? not real? yepo real man.
|
|
|
|
|
|
|
|
puch 3 shoe blue spring adjustable race clutch
|
|
now with blue springs!
|
|
|
|
|
|
|
|
puch za50 e50 CDI stator and magneto + derbi + sachs 505
|
HERE NOW!!
|
|
|
this is just the magneto and the stator plate for all the experimentalists that want to use the CDI box of their choice. we have complete sets available also
|
|
|
|
|
|
|
|
puch e50 CDI complete adventure pack
|
|
HERE NOW!
this is the complete pack - it includes everything shown - the stater, the magneto, and the high rpm cdi box n coil combo!
|
|
|
|
|
|
|
|
puch 70cc 45mm reed valve kit especiale
|
HERE NOW!!
|
|
|
i am nothing, i am everything, who i am. what is this thing? do i really want this? who am I? these are the questions that will not or might so, or will, will not cross your mind when contemplating this purchase of the newest puch kit to hit the streets. reed power for $120, hmm, does the earth sun or moon spin around the sun or the earth or the moon? unfathomable!
|
|
|
|
|
|
|
|
puch ZA50 CDI complete survival pack
|
|
this is the complete two speed ZA50 CDI pack - it includes everything shown - the stator, the magneto, and the high rpm cdi box n 12 volt coil combo!
don't need to move the pickup for two speed, just plug and plaaaaaaaaaaay
|
|
|
|
|
|
|
|
puch E50 stator plate / magneto / points set up completo
|
HERE NOW!!
|
|
|
this is way better than any stupid cdi?
CDI was cool last year maaaan.
|
|
|
|
|
|
|
|
puch E50 ZA50 +++ points stator plate
|
HERE NOW!!
|
|
|
12 volt light coil + internal ignition coil + well everything else new new new and ready to go. very simple.
|
|
|
|
|
|
|
|
puch gilardoni 74cc cylinder reed block kit COMPLETE w/ gilardoni head
|
HERE NOW!!
|
|
|
hello again, i am back from my vacation now
|
|
|
|
|
|
|
|
puch 65cc 43.5mm hero massive port kit
|
$79.99 alternate reality price $40.00
HERE NOW!!
|
|
|
dremel it out - jb weld it up, cuperteen report to come soon on this interesting beast
OVERSTOCK CLEARANCE SPECIAL, lets all help treats make some room on the shelf for more parts!!
ATTN! THIS KIT JUST GOT EVEN MORE BUDGET! "How?" you ask? Well they stopped including the piston, so no piston, no gaskets, no head, no wristpin clip, literally just a cylinder! Kinda cool in a way.
|
|
|
|
|
|
|
|
puch 70cc SHA treat party supreme - version 1
|
$289.99 alternate reality price $269.00
|
|
|
comes with a 70cc 45mm TREAT kit v.1 cylinder, 70cc hi comp head, chrome tecno boss pipe, dellorto SHA 15.15 lever choke carburetor, 15mm SHA intake, throttle cable, + gasket set!!
party rules
|
|
|
|
|
|
|
|
puch CDI full stator plate
|
HERE NOW!!
|
|
|
just the stator plate full of all the coils and pick ups and wires and such for all the experimentalists that want to use the CDI box of their choice. we have complete sets available also
puch E50, ZA50, derbi + sachs 505 mopeds. more possibly too.
|
|
|
|
|
|
|
|
puch CDI flywheel magneto
|
HERE NOW!!
|
|
|
just the flywheel. we have complete sets available also
puch E50, ZA50, derbi + sachs 505 mopeds. more possibly too.
|
|
|
|
|
|
|
|
puch 50cc jammin SHA treat party supreme
|
|
jam out with the jammin puch 50cc jammy treat kit supreme party!
party rules
|
|
|
|
|
|
|
|
puch airsal 70cc 45mm gasket set
|
HERE NOW!!
|
|
|
puch airsal 70cc 45mm gasket set. this is for the puch airsal 70cc kit + other kits too
|
|
|
|
|
|
|
|
puch 70cc tccd cylinder kit - 45mm
|
HERE NOW!!
|
|
|
super dupper rad porting! very nice side ports with channels!
very nice quality all around.. get to it! blast off!
|
|
|
|
|
|
|
|
puch 3 shoe adjustable race clutch with tapped holes for your puller
|
HERE NOW!!
|
|
|
new improved version now comes with tapped holes for your clutch puller, thank you very much....
|
|
|
|
|
|
|
|
puch 70cc absolute treat party supreme
|
$595.00 2018 ESPECIALE! $444.99
|
|
|
ADD TO CART TO CHECK STOCK!
the puch 70cc treat kit absolute treat party supreme!! a winning collection at a winning price. win the race. to work on your maxi. get to the front of the pack. get a head of the game, as jimmy would say "this is the real deal!" what a deal. make a the deal.
NO PIPE INCLUDED!!
|
|
|
|
|
|
|
|
puch 50cc tccd cylinder kit - 38mm - new style
|
$99.00 alternate reality price $59.99
HERE NOW!!
|
|
|
super dupper rad porting! very nice side ports with channels! very nice quality all around.. get to it! blast off!
** SUPER SALE... FOR YOU **
|
|
|
|
|
|
|
|
puch 3 shoe blaster clutch
|
|
insane kick start clutch springs, don't tighten them in too much. major slippage from this, when calculated right it feels like a two speed on your one speed cause of the time it takes to fully engage.
|
|
|
|
|
|
|
|
puch e50 CDI complete adventure pack - VERSION 2
|
|
HERE NOW! complete adventure puch cdi for the people with upgraded cdi box and voltage regulator! complete!!
|
|
|
|
|
|
|
|
puch 50cc budget speed party for the people
|
|
the most affordable party pack for a puch speed upgrade!
party rules
|
|
|
|
|
|
|
|
puch 65cc SHA treat party supreme
|
$280.99 alternate reality price $269.00
|
|
|
comes with a 65cc 45mm TREAT kit , 50cc hi comp head, chrome tecno boss pipe, dellorto SHA 15.15 lever choke carburetor, 15mm SHA intake, throttle cable, + gasket set!!
party rules
|
|
|
|
|
|
|
|
puch 65cc PHBG treat party supreme
|
$333.00 alternate reality price $310.00
|
|
|
comes with a 65cc 45mm TREAT kit , 50cc hi comp head, chrome tecno boss pipe, dellorto PHBG clamp style carburetor with pull choke, 19mm PHBG intake, throttle cable, + gasket set!!
party rules
|
|
|
|
|
|
|
|
puch E50 magneto flywheel - cheapo version
|
*sorry none today*
|
|
|
this is a puch one speed E50 flywheel cheapo magneto.
***these
are NOT as strong as the original BOSCH flywheels. you do not want to
use this on a kitted ripper setup. it will separate at high rpm. these
do work fine on stock and mildly tuned engines! because of this, no
returns!***
|
|
|
|
|
|
|
|
puch athena 70cc 45mm piston port kit
|
HERE NOW!!
|
|
|
athena 70cc 45mm piston port cylinder kit for all puch mopeds!
|
|
|
|
|
|
|
|
USED puch e50 clutch BELL
|
$59.99 alternate reality price $49.99
*sorry none today*
|
|
|
e50 clutch bell in USed condition! score
|
|
|
|
|
|
|
|
USED puch e50 magneto
|
HERE NOW!!
|
|
|
USED original puch bosch ignition flywheel / magneto for E50!!
|
|
|
|
|
|
|
|
USED puch e50 TWO SHOE clutch
|
$79.99 alternate reality price $49.99
*sorry none today*
|
|
|
original used e50 two shoe clutch, with light wear but in great shape!!
much cleaner and nice than the one in the photo! does not come with
clutch springs.
|
|
|
|
|
|
|
|
USED puch e50 starter clutch plate
|
*sorry none today*
|
|
|
e50 starter clutch plate in USed condition! score
|
|
|
|
|
|
|
|
puch airsal 72cc 46mm cylinder kit with head
|
HERE NOW!!
|
|
|
this is the largest kit you can fit without having to grind out the case, same OD on the cylinder sleeve as any 70 kit but 1mm bigger innards! yeaaahhhh!
oh my!
|
|
|
|
|
|
|
|
USED puch za50 magneto
|
HERE NOW!!
|
|
|
USED original puch bosch ignition flywheel / magneto for ZA50!!
|
|
|
|
|
|
|
|
puch 50cc 38mm airsal cylinder kit
|
HERE NOW!!
|
|
|
the puch airsal 50cc 38mm kit, for puch mopeds. yes.
|
|
|
|
|
|
|
|
OEM puch 3 shoe adjustable super racer e50 kick start clutch - with super stiffy springs
|
*sorry none today*
|
|
|
OEM clutch produced from the same original castings as puch late edition 3 shoe clutches.
for puch e50 kick start motors ONLY!
with the super stiffy springs
|
|
|
|
|
|
|
|
USED puch e50 + za50 stator
|
$69.99 alternate reality price $49.99
HERE NOW!!
|
|
|
in used condition and a little rusty! powers in the points man!
|
|
|
|
|
|
|
|
USED puch e50 REVERSE CUT clutch BELL
|
$74.99 alternate reality price $64.99
*sorry none today*
|
|
|
reverse cut EURO edition
|
|
|
|
|
|
|
|
USED original puch magnum cylinder ONLY!
|
$44.99 alternate reality price $34.99
HERE NOW!!
|
|
|
sometimes these stock 50cc magnum cylinders can be really fun...especially when you port it! cylinder only this time
|
|
|
|
|
|
|
|
USED original puch magnum cylinder HEAD
|
HERE NOW!!
|
|
|
used original 50cc head off a puch magnum!
|
|
|
|
|
|
|
|
puch airsal EUROKIT 47mm 6 port cylinder kit with head + ANGLED exhaust port
|
HERE NOW!!
|
|
|
most underrated kit of the century! stacked transfer ports along with the massive 47mm bore make this kit a complete torque monster. destroy gilas off the line with this bad boy at a fraction of the cost. wowza this kit is one bad lil bb
angle port version
|
|
|
|
|
|
|
|
puch athena 70cc 45mm reed cylinder kit - small reed block
|
HERE NOW!!
|
|
|
athena 70cc 45mm cylinder kit for all puch mopeds! this is the version that includes cylinder, intake, reed block, piston, and gaskets.
the boyesen carbon reeds for sachs and such fit perfectly on this! no metal reeds NO! you have to get the carbon ones.
|
|
|
|
|
|
|
|
puch athena 50cc 38mm reed cylinder kit - small reed block
|
HERE NOW!!
|
|
|
Athena 50cc cylinder kit for all puch mopeds! This is the version that includes cylinder, intake, reed block, piston, and gaskets.
|
|
|
|
|
|
|
|
puch athena AJH 70cc 45mm reed cylinder kit - complete
|
HERE NOW!!
|
|
|
athena 70cc 45mm cylinder kit for all puch mopeds! this is the AJH version that includes cylinder, intake, reed block, piston AND a 17mm ANIMAL, ok AMAL, carburetor. this is potentially one of the fastest of the puch 60cc to 70cc cylinders, with some minor mods of course.
|
|
|
|
|
|
|
|
puch athena AJH 50cc 38mm reed cylinder kit
|
HERE NOW!!
|
|
|
athena 50cc 38mm cylinder kit for all puch mopeds! this is the AJH version.. for rippin bad duders on 50cc!
|
|
|
|
|
|
|
|
puch ZA50 + sachs 505 + tomos powerdynamo CDI - 12v / 100w DC
|
$425.00 alternate reality price $375.00
HERE NOW!!
|
|
|
magnet based generator with integrated fully electronic ignition. output at 12 volts / up to 100 watts DC. solid state. maintenance free, electronic ignition!
|
|
|
|
|
|
|
|
puch E50 powerdynamo CDI - 12v / 100w DC
|
$425.00 alternate reality price $375.00
HERE NOW!!
|
|
|
magnet based generator with integrated fully electronic ignition. output at 12 volts / up to 100 watts DC. solid state. maintenance free, electronic ignition!
|
|
|
|
|
|
|
|
USED original puch high torque #44 cylinder ONLY!
|
HERE NOW!!
|
|
|
USED stock #33 high torque cylinder for your e50 or za50!
***this one has a lil porting action going on. someone opened up the transfer ports along with the intake and exhaust.***
|
|
|
|
|
|
|
|
puch airsal EUROKIT 47mm 6 port cylinder kit - FLAT EXHAUST PORT
|
HERE NOW!!
|
|
|
most underrated kit of the century! stacked transfer ports along with the massive 47mm bore make this kit a complete torque monster. destroy gilas off the line with this bad boy at a fraction of the cost. wowza this kit is one bad lil bb
flat port version
|
|
|
|
|
|
|
|
puch 70cc PHBG treat party supreme - version 2
|
$359.99 alternate reality price $339.00
|
|
|
new updated version with malossi E12 filter, BLACK boss pipe, phbg carburetor, high angle piston port intake and everything you need to easily install it on yer bike!
makes a great gift or just gift to yourself, if its your birthday and no one knows or got you anything, but you are amazing and deserve it!!!party rules
|
|
|
|
|
|
|
|
puch airsal EUROKIT 47mm replacement piston
|
HERE NOW!!
|
|
|
replacement 47mm piston for the legendary puch eurokit!
also works as a perfect replacement piston for Puch metrakit 47mm cylinders.
|
|
|
|
|
|
|
|
athena chromed piston ring - 38mm x 1.5mm GI
|
HERE NOW!!
|
|
|
replacement chromed piston ring for all puch athena 38mm 50cc kits!! oh and it also works with the airsal 50 kit, puch treat 50 kit and possibly many more?
38mm x 1.5mm - GI - chromed
|
|
|
|
|
|
|
|
puch 65cc metrakit replacement gasket set - version 1
|
HERE NOW!!
|
|
|
replacement gaskets for the new nikasil mk65!
|
|
|
|
|
|
|
|
puch 45mm parmakit cylinder - SUPER maximum large transfer version
|
HERE NOW!!
|
|
|
45mm parmakit with gratuitously large transfers....
the ultimate sleeper kit?
|
|
|
|
|
|
|
|
OEM puch 3 shoe adjustable e50 kick start clutch - with BLUE springs
|
*sorry none today*
|
|
|
OEM clutch produced from the same original castings as puch late edition 3 shoe clutches.
for puch e50 kick start motors ONLY!
with the infamous BLUE springs
|
|
|
|
|
|
|
|
OEM puch 3 shoe e50 kick start clutch AND clutch bell party pack
|
*sorry none today*
|
|
|
OEM 3 shoe clutch with blue springs + kickstart specific clutch bell!! bushing version with enhanced lubrication via oiling flutes.
for kickstart e50 ONLy!!
|
|
|
|
|
|
|
|
PUCH enameled steel camping rally mug!!!
|
*sorry none today*
|
|
|
classic PUCH enameled steel mug. for any liquid of your choosing!
|
|
|
|
|
|
|
|
USED original puch maxi cylinder HEAD - old style fins
|
$14.99 alternate reality price $13.99
HERE NOW!!
|
|
|
used original 50cc head off a puch maxi!
old style fins
|
|
|
|
|
|
|
|
puch moped 80cc 47mm parmakit cylinder kit - no head
|
HERE NOW!!
|
|
|
aluminum nikasil lined 3 port 80cc cylinder kit from parmakit. Extremely interesting for its bridged port design, large cc, and nikasil lining.
NO head included.
seized by all the greats!! will you prevail??
|
|
|
|
|
|
|
|
puch 80cc ZETA cylinder kit - no head
|
$400.00 alternate reality price $299.99
*sorry none today*
|
|
|
the illusive new old stock 47mm zeta kit has come to visit treatland and i must say its quite the interesting beast...legend has it this is where the parmakit mold came from, and its possible this kit may hold yet undiscovered power within...hm, well one of you out there will find out, cause its the only one we got til, well, who knows?
|
|
|
|
|
|
|
|
puch treat kit party - 70cc piston port / CUSTOM cut head
|
$140.00 combo discount! $132.99
|
|
|
ADD TO CART TO CHECK STOCK!!
the ultimate simplistic party for your piston port treat kit needz!!!
choose between your custom cut 70cc head and kit combo inside.
|
|
|
|
|
|
|
|
puch treat kit party - 70cc REED kit / CUSTOM cut head
|
|
ADD TO CART TO CHECK STOCK!!
the ultimate simplistic party for your treat REED kit needz!!!
choose between your custom cut 70cc head and kit combo inside.
|
|
|
|
|
|
|
|
puch treat kit party - 70cc TCCD kit / CUSTOM cut head
|
|
ADD TO CART TO CHECK STOCK!!
the ultimate simplistic party for your puch TCCD kit needz!!!
choose between your custom cut 70cc head and kit combo inside.
|
|
|
|
|
|
|
|
OEM puch e50 two shoe clutch
|
$149.99 alternate reality price $99.99
*sorry none today*
|
|
|
OEM new old stock e50 two shoe clutch!
cool grooved pads for more performance!
does not have a woodruff key slot!!
|
|
|
|
|
|
|
|
100% authentic OEM bing jets for puch
|
|
HERE NOW! click to check available sizes.
100% authentic original main jets for bing carburetors as found on puch and solo mopeds!
|
|
|
|
|
|
|
|
100% authentic OEM bing SLIDEs for puch
|
|
HERE NOW! 100% authentic original SLIDES for bing carburetors as found on puch and solo mopeds!
we have 5 versions!! # 4, # 8, # 24, # 25 and # 26 !
|
|
|
|
|
|
|
|
slighty USED puch e50 TWO SHOE back clutch plate
|
$22.00 alternate reality price $20.00
*sorry none today*
|
|
|
original used e50 two shoe clutch clutch, with light wear but in great shape!! lots of clutch material on the back
|
|
|
|
|
|
|
|
100% authentic OEM SUPER bing IDLE jets
|
|
HERE NOW! click to check available sizes.
100% authentic original IDLE jets for SUPER bing carburetors as found on austro daimler and some other late model puchs!
|
|
|
|
|
|
|
|
NOS puch 46mm ZETA piston
|
HERE NOW!!
|
|
|
new old stock puch ZETA 46mm replacement piston!! featuring triangle boost port powers
|
|
|
|
|
|
|
|
100% authentic OEM bing SLIDE for puch - number 25 with speed HOLE
|
HERE NOW!!
|
|
|
100% authentic original SLIDE for bing carburetors as found on puch and solo mopeds!
|
|
|
|
|
|
|
|
puch 43.50mm 65cc ESO BBK cylinder kit
|
$100.00 alternate reality price $64.99
HERE NOW!!
|
|
|
NEW eso 43.50mm 65cc aluminum nikasil lined cylinder kit for all puch
mopeds!! e50 and za50!! yes!! eerily similar to something i've seen
before.... alas, must just be Déjà vu. maybe im getting old.
|
|
|
|
|
|
|
|
USED puch clutch bell - AUTO START e50!
|
*sorry none today*
|
|
|
very rare AUTO START e50 clutch bell in used condition!
no bushing on this guy
|
|
|
|
|
|
|
|
NOS puch za50 clutch side crankshaft bushing - 9.5mm OD
|
HERE NOW!!
|
|
|
new old stock clutch side crankshaft bushing for puch za50!!
9.5mm OD
puch part # 321.1.12.617.3
|
|
|
|
|
|
|
|
treatland's 2020 camo 5 panel confuser hat
|
*sorry none today*
|
|
|
camo confuser
|
|
|
|
|
|
|
|
puch athena 70cc 45mm piston port replacement PISTON - size A
|
HERE NOW!!
|
|
|
replacement piston for the athena 70cc 45mm piston port cylinder kit for all puch mopeds!
comes with everything ya need piston, ring, wrist pin clips, and wrist pin.
|
|
|
|
|
|
|
|
papa john's dad hat - red
|
*sorry none today*
|
|
|
for a limited time only, treats has acquired some of papa's johns authentic italian dad hats
|
|
|
|
|
|
|
|
treats gang official gang beanie
|
*sorry none today*
|
|
|
tuque gang
|
|
|
|
|
|
|
|
puch moped nikasil 65cc metrakit replacement PISTON
|
HERE NOW!!
|
|
|
replacement piston kit for the NEW aluminum nikasil lined puch 65cc metrakit !!
comes with piston, rings, wrist pin clips and wrist pin.
|
|
|
|
|
|
|
|
treats gang official gang flip-flops - large
|
HERE NOW!!
|
|
|
treats gang official gang flip-flops in larrrrggeee
|
|
|
|
|
|
|
|
treats gang official gang flip-flops - medium
|
HERE NOW!!
|
|
|
treats gang official gang flip-flops in medium
|
|
|
|
|
|
|
|
USED original puch maxi cylinder HEAD - high torque
|
HERE NOW!!
|
|
|
USED original puch maxi cylinder HEAD - high torque
|
|
|
|
|
|
|
|
USED original puch maxi HIGH TORQUE cylinder - cyl only
|
HERE NOW!!
|
|
|
USED original puch maxi 50cc stock high torque cylinder! these are DIRTY and the bore may have some pitting. at the very least, you will need to hone this before running it. probably want to overbore it just to be safe. but hey, for $18 how can ya go wrong?
|
|
|
|
|
|
|
|
papa john's dad hat - light blue denim
|
*sorry none today*
|
|
|
for a limited time only, treats has acquired some of papa's johns authentic italian dad hats
|
|
|
|
|
|
|
|
treats gang official gang beanie - tie dye v1
|
*sorry none today*
|
|
|
ocean tuque gang
|
|
|
|
|
|
|
|
treats gang official gang beanie - tie dye v2
|
HERE NOW!!
|
|
|
purple passion tuque gang
|
|
|
|
|
|
|
|
treats gang official gang beanie - tie dye v3
|
HERE NOW!!
|
|
|
sky tuque gang
|
|
|
|
|
|
|
|
treats gang official gang beanie - tie dye v4
|
HERE NOW!!
|
|
|
cotton candy tuque gang
|
|
|
|
|
|
|
|
USED puch e50 + za50 stator - 5 wire
|
$69.99 alternate reality price $43.99
HERE NOW!!
|
|
|
in used condition and a little rusty! powers in the points man!
|
|
|
|
|
|
|
|
USED puch e50 + za50 stator - external condenser mod
|
$69.99 alternate reality price $40.99
HERE NOW!!
|
|
|
in used condition and a little rusty! powers in the points man!
|
|
|
|
|
|
|
|
treatland's enamel steel coffee cup
|
HERE NOW!!
|
|
|
"international friend of moped"
|
|
|
|
|
|
|
|
extremely rare and based treatland denim bucket hat
|
$9,999.99 alternate reality price $29.99
*sorry none today*
|
|
|
HYPER rare
|
|
|
|
|
|
|
|
treatland's summer 2022 party visor
|
*sorry none today*
|
|
|
"party" visor
|
|
|
|
|
|
|
|
extremely rare and based BLUE terrycloth bucket hat
|
$9,999.99 alternate reality price $29.99
*sorry none today*
|
|
|
HYPER rare
|
|
|
|
|
|
|
|
extremely rare and based PINK terrycloth bucket hat
|
$9,999.99 alternate reality price $29.99
*sorry none today*
|
|
|
HYPER rare
|
|
|
|
|
|
|
|
extremely rare and based YELLOW terrycloth bucket hat
|
$9,999.99 alternate reality price $29.99
*sorry none today*
|
|
|
HYPER rare
|
|
|
|
|
|
|
|
OMEGA racing trucker hat - black n white
|
HERE NOW!!
|
|
|
cool new OMEGA racing trucker hat!!
|
|
|
|
|
|
|
|
OMEGA racing t-shirt - L
|
*sorry none today*
|
|
|
cool new OMEGA racing t-shirt!!
LARGE
|
|
|
|
|
|
|
|
NOS vespa 55mm ZETA piston
|
HERE NOW!!
|
|
|
new old stock vespa ZETA 55mm replacement piston!!
comes with piston, rings, wrist pin, and clips!!
|
|
|
|
|
|
|
|
NOS puch high torque EURO cylinder - no piston
|
HERE NOW!!
|
|
|
new old stock original EURO high torque 38mm puch cylinder!! this features the 3 bolt intake not found on many puchs in the USA.
|
|
|
|
|
|
|
|
puch two speed ZA50 CDI box - version II
|
HERE NOW!!
|
|
|
the high rpm cdi box n 12 volt coil combo for the puch cdi for ZA50, derbi and sachs 505 +?
this is version II
|
|
|
|
|
|
|
|
puch moped polini 64cc piston ring - chromed
|
*sorry none today*
|
|
|
**discontinued July 2021, get em while ya can.** replacement 64cc puch moped polini piston ring. this is the chromed version. so the out side of it is chromed.
43.5mm x 1.2mm - GI - chromed
|
|
|
|
|
|
|
|
NEW bing 15mm CLONE carburetor puch moped - version 1.5
|
HERE NOW!!
|
|
|
new new version of the 15mm bing clone carburetor for all puch mopeds - replaces and upgrades the stock carb, fits perfectly on the intake you have, or you can upgrade to the 15mm bing intake.
comes with an 82 bing jet and uses regular bing jets and atomizers and all that stuff too.
|
|
|
|
|
|
|
|
puch airsal 50cc 38mm gasket set
|
HERE NOW!!
|
|
|
gasket set for the puch airsal 50cc 38mm kit.
|
|
|
|
|
|
|
|
puch airsal 65cc 44mm gasket set
|
HERE NOW!!
|
|
|
gasket set for the puch airsal 65cc 44mm kit.
|
|
|
|
|
|
|
|
puch airsal 72cc 46mm gasket set
|
HERE NOW!!
|
|
|
puch airsal 72cc 46mm replacement gasket set
|
|
|
|
|
|
|
|
NEW bing 12mm TWELVE CLONE carburetor puch moped - version 1.5
|
HERE NOW!!
|
|
|
new new version of the 12mm bing clone carburetor for all puch mopeds - replaces and upgrades the stock carb, fits perfectly on the intake you have, or you can upgrade to the 15mm bing intake.
comes with an 82 bing jet and uses regular bing jets and atomizers and all that stuff too.
|
|
|
|
|
|
|
|
puch 50cc metrakit cylinder + piston + gaskets ONLY
|
$299.00 alternate reality price $229.99
HERE NOW!!
|
|
|
BACK FROM THE DEAD
puch 50cc metrakit with cylinder, intake, piston, rings, pin, clips + gaskets ONLY ONLY ONLY!! no head with this one, sorry!
the pack with head and cylinder is now DISCONTINUED, this is yer only option if you want a 50cc metra for puch. sorrrry!
|
|
|
|
|
|
|
|
puch E50 powerdynamo CDI stator - clockwise
|
*sorry none today*
|
|
|
replacement stator for the puch E50 powerdynamo CDI
this stator is for clockwise rotation
|
|
|
|
|
|
|
|
puch 70cc hi compression head - old style fins
|
*sorry none today*
|
|
|
old style fins in the 70cc
|
|
|
|
|
|
|
|
puch MAXI RACER seat
|
HERE NOW!!
|
|
|
the new and improved puch maxi long racer seat! this one is ready to mount with no cutting or hacking required. sits low like you want it with racer bump on the back so you don't fall off at high speeds!
|
|
|
|
|
|
|
|
powerdynamo magneto
|
*sorry none today*
|
|
|
replacement magneto for the puch E50 + ZA50 power dynamo cdi units
|
|
|
|
|
|
|
|
puch malossi SHA 15.15 carburetor kit
|
HERE NOW!!
|
|
|
puch sha 15.15 carburetor upgrade kit. party time!!
|
|
|
|
|
|
|
|
powerdynamo CDI stator plate bracket
|
*sorry none today*
|
|
|
replacement stator plate bracket for all powerdynamo CDI units!
|
|
|
|
|
|
|
|
polini black racer seat
|
HERE NOW!!
|
|
|
polini black racer seat for the baddest dudes ever! put it on any bike you desire!!
|
|
|
|
|
|
|
|
polini blue racer seat
|
HERE NOW!!
|
|
|
polini blue racer seat for the baddest dudes ever! put it on any bike you desire!!
|
|
|
|
|
|
|
|
AUTHENTIC bing 15mm carburetor puch moped
|
$140.00 alternate reality price $125.00
HERE NOW!!
|
|
|
genuine, authentic, original, OEM 15mm bing carburetor for all puch
mopeds - replaces and upgrades the stock carb, fits perfectly on the
intake you have, or you can upgrade to the 15mm bing intake. Please be
sure to get some jets so you can get the most out of your new carb.
|
|
|
|
|
|
|
|
puch 50cc hi hi compression head
|
HERE NOW!!
|
|
|
50cc puch hi hi compression head for any and all puch mopeds.
bolts on all puch engines, tomos, and yamaha chappy too!
|
|
|
|
|
|
|
|
puch 50cc hi compression head old style fins
|
HERE NOW!!
|
|
|
used with great success on polini, malossi, metra (65) and stock
|
|
|
|
|
|
|
|
puch 70cc hi hi compression head
|
HERE NOW!!
|
|
|
usable on the numerous 70cc kits like athena, tccd, kstar as well as the 64cc polini, and the 65cc metrakit.
works perfect on tomos and yamaha chappy as well
|
|
|
|
|
|
|
|
puch malossi 15mm SHA intake
|
HERE NOW!!
|
|
|
puch malossi 15mm square port intake for dellorto SHA carbs
|
|
|
|
|
|
|
|
puch two speed ZA50 CDI box - version I
|
*sorry none today*
|
|
|
the high rpm cdi box n 12 volt coil combo for the puch cdi for ZA50, derbi and sachs 505 mopeds and more!
this is version I
|
|
|
|
|
|
|
|
puch E50 cdi high rpm box
|
HERE NOW!!
|
|
|
here it is!
the high rpm cdi box n 12 volt coil combo for the puch cdi
|
|
|
|
|
|
|
|
puch 70cc LOW compression head
|
HERE NOW!!
|
|
|
usable on the numerous 70cc kits like athena, tccd, kstar as well as the 64cc polini, and the 65cc metrakit.
works perfect on tomos and yamaha chappy and the QT50 as well!
this is the low compression style head with the different style sealing surface, more like the OG style puch head.
|
|
|
|
|
|
|
|
puch 50cc LOW compression head
|
HERE NOW!!
|
|
|
50cc puch low compression head for any and all puch mopeds.
this is the low compression style head with the different style sealing surface, more like the OG style puch head.
bolts on all puch engines, tomos, and yamaha chappy too!
|
|
|
|
|
|
|
|
puch airsal 46mm head
|
HERE NOW!!
|
|
|
46mm super XL head for coolin ya down hot hot hot
for the puch 46mm airsal kit duh
|
|
|
|
|
|
|
|
puch airsal 47mm head - for EUROKIT
|
HERE NOW!!
|
|
|
47mm super XL head for coolin ya down hot hot hot
for puch EUROKIT or any other 47mm kit like gila, parma, mk80, whateva
|
|
|
|
|
|
|
|
puch maxi USED stock pipe
|
$19.99 alternate reality price $14.99
*sorry none today*
|
|
|
stock USED puch maxi exhaust pipe in USED condition
*** just a heads up every single one of these has dents in the header!!***
keep your moped safe, quiet and stock with this lil guy
|
|
|
|
|
|
|
|
bing 14mm clone carburetor version XIV
|
HERE NOW!!
|
|
|
bing 14mm clone carburetor for puch mopeds!!!
|
|
|
|
|
|
|
|
puch airsal EUROKIT 47mm gasket set
|
HERE NOW!!
|
|
|
puch airsal 47mm EUROKIT replacement gasket set
|
|
|
|
|
|
|
|
puch ESO performance clutch spring for e50
|
HERE NOW!!
|
|
|
a nice clutch spring for all e50 clutches right smack dab in the middle between blue and kickstart springs!!
|
|
|
|
|
|
|
|
bing sachs square bing complete rebuild kit
|
HERE NOW!!
|
|
|
complete rebuild kit for the sachs square bing!
|
|
|
|
|
|
|
|
johhny hella rad's USED puch DART stock black pipe - angled
|
*sorry none today*
|
|
|
johnny hella rad has been a friend of treats here in SF since the beginning, randomly dropping off pizza on his hobbit, dart, and Young Gentleman's Moped Club puch magnum. he will occasionally bless us with randomly gifted used parts, and there must be a puch out there that needs a stock black angled pipe!
|
|
|
|
|
|
|
|
NOS puch square SUPER BING - 12mm
|
$105.00 pro tuner discount! $59.99
*sorry none today*
|
|
|
**ATTENTION** this is NOT A NORMAL PUCH BING !! fits on vm18 intakes for a world of possibilities . . . .
this is a special treaty val-u menu discount for those ready to dive into super bing territory. bring your hidden pro tuner powers n a little make-it-work tech.
READ INFO INSIDE!!!!!!!
|
|
|
|
|
|
|
|
puch MAXI RACER seat - CARAMEL
|
HERE NOW!!
|
|
|
the new and improved puch maxi long racer seat! this one is ready to mount with no cutting or hacking required. sits low like you want it with racer bump on the back so you don't fall off at high speeds!
now in stylish CARAMEL brown
|
|
|
|
|
|
|
|
bing 12mm clone carburetor kit for ILO piano g50 and sears allstate campus 50
|
HERE NOW!!
|
|
|
new 12mm clone bing carburetor for the ILO / JLO old timer motor!! may fit puch dakota as well...oh and it fits the puch sears allstate campus 50! a very interesting looking carb with built in intake. ripper!
|
|
|
|
|
|
|
|
bing 15mm clone carburetor kit for ILO piano g50 and sears allstate campus 50
|
HERE NOW!!
|
|
|
new 15mm clone bing carburetor for the ILO / JLO old timer motor!! may fit puch dakota as well...oh and it fits the puch sears allstate campus 50! a very interesting looking carb with built in intake. ripper!
|
|
|
|
|
|
|
|
puch MAGNUM seat - black
|
HERE NOW!!
|
|
|
rejoice, the day has finally come....a brand new seat for your puch MAGNUM !!!
|
|
|
|
|
|
|
|
NOS puch gilardoni 47mm head - old style fins
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
new old stock puch GILARDONI "old" style fin head! this must be for some long discontinued kit...very interesting.
|
|
|
|
|
|
|
|
bing 17mm clone carburetor kit for sachs 50/2 50/3 50/4
|
HERE NOW!!
|
|
|
new 17mm clone bing carburetor for the sachs 50/2 50/3 50/4 old timer vertical cylinder engines!!
not for 504 or 505!
|
|
|
|
|
|
|
|
puch E50 ITALKIT racing crankshaft
|
*sorry none today*
|
|
|
ITALKIT (gilardoni) race crankshaft for puch E50!
unstuffed and super light!!
|
|
|
|
|
|
|
|
puch simonini black on black carbon fiber performance pipe
|
HERE NOW!!
|
|
|
Pretty much one of the most impressive chambers for puch that there is.
NOW IN MATTE BLACK FINISH!! we will rephoto them soon!
|
|
|
|
|
|
|
|
puch moped new cables ZA50 two speed party pack
|
|
HERE NOW! full party pack with all cables + knarps you need for TWO SPEED
party rules
|
|
|
|
|
|
|
|
puch moped E50 one speed clutch bushing
|
HERE NOW!!
|
|
|
brass clutch bushing for the E50 one speed puch engine!
replaces puch part # 349.2.12.011.1
|
|
|
|
|
|
|
|
puch TECNO circuit performance exhaust pipe
|
HERE NOW!!
|
|
|
great low to mid range power, perfecto for stock or kitted bikes lookin for better acceleration and increased top speed.
no pedal clearance issues either score
|
|
|
|
|
|
|
|
puch tecno CHROME BOSS performance pipe
|
*sorry none today*
|
|
|
totally BOSS chrome pipe with huge header and mysterious black magic full chamber
|
|
|
|
|
|
|
|
puch moped BLACK BOSS performance pipe
|
HERE NOW!!
|
|
|
rather understated clean appearance, blends in and doesn't alert people to your "racer" status until after you blast them
|
|
|
|
|
|
|
|
puch MAXI cable set E50 - BLACK
|
HERE NOW!!
|
|
|
new replacement cable set for puch maxi, newport, nostalgia, etc... also works well on pinto, dart and swinger!
magnum, murray and freespirit require slightly longer cables. sorry!!
|
|
|
|
|
|
|
|
puch puch puch PROMA circuit performance pipe
|
*sorry none today*
|
|
|
screamin mid range from this beast back from the undead yah like zombie style waken em up at least
|
|
|
|
|
|
|
|
puch BLUE hi tension E50 clutch spring
|
HERE NOW!!
|
|
|
NOS original puch BLUE spring. get as many as you need!
way stiffer for later engagement, if you want even stiffer, as some people think these aren't stiff enough, get these springs.
THESE ARE SOLD BY THE PIECE, I.E. you get ONE if you buy ONE.
if you go crazy and buy TWO you get TWO
if you get real crazy and buy THREE you get THREE
and if you buy 203082104981 we don't got that many
|
|
|
|
|
|
|
|
puch maxi chrome stock exhaust pipe by tecno - 22mm
|
HERE NOW!!
|
|
|
stock exhaust pipe in stunning chrome finish. stock size 22mm exhaust manifold ID
|
|
|
|
|
|
|
|
puch simonini aluminum silencer performance pipe
|
HERE NOW!!
|
|
|
Pretty much one of the most impressive chambers for puch that there is.
|
|
|
|
|
|
|
|
puch jammy performance pipe
|
HERE NOW!!
|
|
|
the jammy jamarcol pipe now for puch too!
|
|
|
|
|
|
|
|
puch moped 25mm chrome exhaust header
|
HERE NOW!!
|
|
|
this is a chrome header for puch mopeds. it's got a whopping 25mm inside diameter. and a 28mm OD for use with 28mm two part chambers.
|
|
|
|
|
|
|
|
puch tecno bullet pipe with aluminum baffle
|
HERE NOW!!
|
|
|
chrome puch bullet pipe with aluminum baffle - mounts easily to almost all puch bikes
|
|
|
|
|
|
|
|
puch maxi chrome stock exhaust pipe by tecno - 28mm OD/24mm ID
|
HERE NOW!!
|
|
|
24mm ID/28mm OD exhaust port and header for undercover big boyz
|
|
|
|
|
|
|
|
puch tecnigas next performance exhaust pipe - silver edition
|
HERE NOW!!
|
|
|
super good quality construction, clear coat expansion chamber
silver baffle edition.
|
|
|
|
|
|
|
|
puch super stiffy clutch spring for all puch E50 clutches
|
HERE NOW!!
|
|
|
these are made for the puch kick start clutches and work with all puch E50 clutches, 3 shoe, 2 shoe, kick start, performance, stock. .
These are the super stiffies, the best we have.
THESE ARE SOLD BY THE PIECE, I.E. you get ONE if you buy ONE.
|
|
|
|
|
|
|
|
puch biturbo rippin dude pipe - GOLD baffle
|
HERE NOW!!
|
|
|
the puch biturbo! here finally. we've been waiting soooo sooooooo long for this. well not really. we thought they were illegal. but i guess not
for all your flat port puch cylinders.
gold baffle!
|
|
|
|
|
|
|
|
puch proma GRAND PRIX pipe - clear coat
|
HERE NOW!!
|
|
|
new clear coat finish with removable aluminum silver baffle! much easier to change packing with this version
|
|
|
|
|
|
|
|
proma GRAND PRIX black chamber - 29mm
|
HERE NOW!!
|
|
|
the infamous proma grand prix. now you can get the chamber and baffle alone with no header.
|
|
|
|
|
|
|
|
NOS puch and sachs flywheel nut
|
HERE NOW!!
|
|
|
NOS puch flywheel nut works on e50 and za50 motors as well as sachs 504 and 505!
puch part # 901.2943 sachs part # 0942 072 100
|
|
|
|
|
|
|
|
bing 17mm CLONE carburetor
|
HERE NOW!!
|
|
|
17mm bing clone carburetor for many a moped. i remember when these used to appear back like hmm 5 years ago n they came from old chainsaws. i put one on my polini it was a ripper.
|
|
|
|
|
|
|
|
PUCH PVL CDI internal rotor ignition system
|
$280.00 alternate reality price $199.99
*sorry none today*
|
|
|
internal rotor CDI ignition for any puch moped ya got! comes with everything shown here, magneto, stator assembly and cdi box. do yer research, no refunds, whiners or funny types, nothing humorous here at all, this is serious man. yeah
|
|
|
|
|
|
|
|
replacement tecnigas next exhaust baffle - black
|
*sorry none today*
|
|
|
replacement black baffle for the tecnigas next exhaust pipe
|
|
|
|
|
|
|
|
crazy wayne custom 13 port puch 45mm treat kit
|
*sorry none today*
|
|
|
only from the mind of crazy wayne could there be a porting job like this. now you can purchase crazy from the man himself! the crazy wayne custom ported puch 45mm treat kit.
this kit is a first run of the 13 port treat kit 1.5 with piston transfer ports and oil/cooling porting & ring land ports.
|
|
|
|
|
|
|
|
puch e50 clutch cover allen bolt set x4
|
|
clutch cover allen bolt set for your puch e50 motor!
you get 4!
|
|
|
|
|
|
|
|
puch simonini chrome performance exhaust pipe with black or green carbon baffle
|
HERE NOW!!
|
|
|
craaaazy chrome expansion chamber with black or dark green carbon silencer
|
|
|
|
|
|
|
|
puch e50 tool party
|
|
puch e50 tool party tool set tool set!
|
|
|
|
|
|
|
|
puch clutch/flywheel nut with washer
|
|
brand new for you and you and you too, also a clutch nut/washer for sachs 505/504!
|
|
|
|
|
|
|
|
puch E50 case allen bolts set - stainless
|
HERE NOW!!
|
|
|
set of e50 allen case bolts now with top of the line hardware
|
|
|
|
|
|
|
|
puch 5 star hub bolt pack
|
|
set of allen bolts for one puch 5 star hub, front or rear!!
|
|
|
|
|
|
|
|
puch e50 clutch cover stainless steel allen bolt set x4
|
|
STAINLESS STEEL clutch cover allen bolt set for your puch e50 motor!
you get 4!
|
|
|
|
|
|
|
|
MLM BK100 pipe for puch magnum angled exhaust port
|
$325.00 alternate reality price $275.00
*sorry none today*
|
|
|
motion left mopeds BK100 pipe.. designed to fit on a puch magnum using angled exhaust port kits like gilardoni, metrakit and parmakit! this has to be one of the most bad ass pipes out there right now! huge chamber design 100mm OD at the largest cone!
|
|
|
|
|
|
|
|
MLM cali pipe for puch maxi with flat port
|
*sorry none today*
|
|
|
motion left puch maxi cali pipe, this model is designed to work with any flat port kit on a puch maxi frame, kits such as polini, treat kits, athena, metra 65, airsal and so many more..
|
|
|
|
|
|
|
|
puch estoril performance pipe BLACK CARBON
|
HERE NOW!!
|
|
|
new estoril featuring removed internal baffle/"restrictor" that was in the last cone. just what you asked for i believe. oh and in black carbon! right??
|
|
|
|
|
|
|
|
MLM BK100 pipe for puch magnum angled exhaust port with side bleed
|
HERE NOW!!
|
|
|
motion left mopeds BK100 pipe with side bleed.. designed to fit on a puch magnum using angled exhaust port kits like gilardoni, metrakit and parmakit! this has to be one of the most bad ass pipes out there right now! huge chamber design 100mm OD at the largest cone!
|
|
|
|
|
|
|
|
MLM cali pipe for puch maxi flat port with side bleed
|
$275.00 alternate reality price $219.99
HERE NOW!!
|
|
|
motion left puch maxi cali pipe with side bleed, this model is designed to work with any flat port kit on a puch maxi frame, kits such as polini, treat kits, athena, metra 65, airsal and so many more..
|
|
|
|
|
|
|
|
puch estoril performance pipe
|
HERE NOW!!
|
|
|
estoril pipe for all around amazing power - great multi stage expansion chamber, quieter than most pipes
|
|
|
|
|
|
|
|
MLM puch MAXI super reinforced BLACK swing arm
|
*sorry none today*
|
|
|
motion left mopeds super reinforced black E-coated wide swing arm for puch maxi mopeds!
|
|
|
|
|
|
|
|
original OEM bing 14mm carburetor body
|
*sorry none today*
|
|
|
just the body and the primer button. but nothing else.
oh and original!
|
|
|
|
|
|
|
|
MLM BK100 pipe for puch maxi flat port exhaust with side bleed
|
HERE NOW!!
|
|
|
motion left mopeds BK100 pipe with side bleed.. designed to fit on a puch maxi using flat exhaust port kits like puch polini, athena, treat especiale and many more! this has to be one of the most bad ass pipes out there right now! huge chamber design 100mm OD at the largest cone!
|
|
|
|
|
|
|
|
trickMETRIC puch HERO base gasket
|
*sorry none today*
|
|
|
very nice gasket for the puch 65cc hero massive port kit!
custom made by trickMETRIC!
|
|
|
|
|
|
|
|
puch athena AJH 70cc 45mm reed cylinder - piston ONLY
|
*sorry none today*
|
|
|
athena 70cc 45mm cylinder kit for all puch mopeds! this is the AJH version that includes the cylinder and piston only. make your own intake, find your own reeds, more info within!
|
|
|
|
|
|
|
|
MLM puch MAGNUM super reinforced BLACK swing arm
|
*sorry none today*
|
|
|
motion left mopeds super reinforced black E-coated wide swing arm for puch magnum mopeds!
|
|
|
|
|
|
|
|
puch biturbo rippin dude pipe - ALUMINUM baffle, NO ITS PLATINUM ACTUALLY OMG !
|
HERE NOW!!
|
|
|
the puch biturbo! here finally. we've been waiting soooo sooooooo long for this. well not really.
for all your puch
aluminum baffle!
|
|
|
|
|
|
|
|
HPI replacement 3 pole waterproof connector
|
HERE NOW!!
|
|
|
waterproof 3 pole HPI connector set!
|
|
|
|
|
|
|
|
MLM puch swingarm back mount plate
|
HERE NOW!!
|
|
|
mlm back mount plate for all puch swingarms
|
|
|
|
|
|
|
|
puch e50 jammer clutch - REPLACEMENT TOP BRACE
|
HERE NOW!!
|
|
|
replacement top brace piece for the PUCH jammers!
just in case!
|
|
|
|
|
|
|
|
puch e50 jammer clutch - REPLACEMENT BOLTS (set of 3)
|
HERE NOW!!
|
|
|
replacement 3 pack of m6 x 5mm countersunk bolts for the jammer!
a nice thing to have if you're frequently disassembling yer clutch
|
|
|
|
|
|
|
|
puch e50 jammer clutch - REPLACEMENT BACK PLATE
|
HERE NOW!!
|
|
|
replacement back plate + friction material for the jammer!
just in case!
|
|
|
|
|
|
|
|
HPI internal rotor CDI ignition system for puch + tomos + derbi + sachs n more
|
HERE NOW!!
|
|
|
for tru racers, freebirds, n rad dudes, get lit up yooo
pretty much the fits on all the mopeds. check within to find out. what. it . fits on
|
|
|
|
|
|
|
|
puch moped E50 clutch bushing goodie bag
|
HERE NOW!!
|
|
|
a nice goodie bag of e50 clutch stuff to help ya out
|
|
|
|
|
|
|
|
replacement proma BAFFLE
|
HERE NOW!!
|
|
|
replacement proma baffle for puch, honda hobbit, and vespa ciao proma circuit pipes!
info inside baaaaybz
|
|
|
|
|
|
|
|
MLM puch MAGNUM super reinforced BLACK swing arm - for BERNARDI 3 and 5 star magz
|
HERE NOW!!
|
|
|
motion left mopeds super reinforced black E-coated wide swing arm for puch magnum or maxi!! er any puch really... this one is specifically made for the 3 and 5 star bernardi mag wheels that we sell! they have a different brake plate tab location and a hangar for the rear brake cable!!! yess!
|
|
|
|
|
|
|
|
tecnigas Q-TRE scooty pipe
|
*sorry none today*
|
|
|
tecnigas Q-TRE super scooty blaster pipe for hackin n welding onto anything ya want.
slightly less intense than the TRIOPS but for a fraction of the price.
|
|
|
|
|
|
|
|
MLM peoples pipe for stock puch magnum angled exhaust port - stock blaster
|
*sorry none today*
|
|
|
contrary to
popular belief, bigger isnt always better! the header on this pipe is
designed to work even better with a stock cylinder on a puch magnum!!
your bike actually needs this size to match the stock exhaust size and
will help you brap and blast the night away!!!
the people have spoken and we redesigned a new 2017 version for ya!
|
|
|
|
|
|
|
|
MLM peoples pipe for stock puch magnum angled exhaust port - larger header
|
HERE NOW!!
|
|
|
the first performance made specifically designed to fit on a puch magnum using the stock cylinder. handmade by motion left mopeds with a lustrous black powder coat and easily repackable silencer
|
|
|
|
|
|
|
|
MLM peoples pipe for puch magnum X "childrens" dirt bike
|
HERE NOW!!
|
|
|
motion left mopeds peoples pipe.. designed to fit on a puch magnum X kids dirt bike thing!!! perfecto upgrade with performance for the people!
|
|
|
|
|
|
|
|
MLM davinci pipe for puch maxi - angled port
|
HERE NOW!!
|
|
|
motion left puch
maxi davinci pipe!!! this model is designed to work with any angled port kit on
a puch maxi frame, such as gilardoni, angled eurokit, puch metrakit and more!!
the davinci pipe is a masterpiece of
cones previously unseen in prior motion left designs, unleash the full
potential of your kit with the magic that lies within davinci's
code...or something?
|
|
|
|
|
|
|
|
MLM puch PARAGON pipe - angled
|
*sorry none today*
|
|
|
the PARAGON pipe for angled puch cylinders like gilardoni, metrakit, angled eurokit, stock magnum and more...
info inside!!!
|
|
|
|
|
|
|
|
puch moped E50 clutch bushing - RACE version
|
HERE NOW!!
|
|
|
brass clutch bushing for the E50 one speed puch engine
this is the high quality RACE version thats designed with higher quality material and made for maximum load!
replaces puch part # 349.2.12.011.1
|
|
|
|
|
|
|
|
MLM puch maxi stainless steel DRIVE CHAIN GUARD - left side
|
HERE NOW!!
|
|
|
oh man, i remember thinking of this idea wayyyy back in the good ol
days...ok it wasnt really that long ago, and then it kinda lingered for a while...AND NOW this incredibly high
quality seriously sick chain guard for maxi / newport came out way
better than ever imagined...you can see your reflection in this baby, i
mean, if you really want to reflect - OR DO YOU? and i must say, moped
chains are violent at double the speed they were meant to go. protect yo
self okay? get a chain guard. especially THIS one, cant believe its so
nice........!!!!!!
|
|
|
|
|
|
|
|
MLM G-104 pipe for puch maxi - angled port
|
HERE NOW!!
|
|
|
MLM's newest advancements in massive pipes....the g104! an absolute powerhouse for big setups
when i say big i mean big.
|
|
|
|
|
|
|
|
MLM puch maxi BLK DRIVE CHAIN GUARD - left side
|
HERE NOW!!
|
|
|
watch out for them shoe laces!!!! dont get your girbaud's all caught up once you lose the plastic side covers
you still wanna cover up the chain. well, now we got one made by MLM in
the USA, in deep dark seductive blk
made for maxi but you could probably use on magnum too if you are a magnum kinda gurl or boy i guess
|
|
|
|
|
|
|
|
MLM puch maxi black PEDAL CHAIN GUARD - right side
|
HERE NOW!!
|
|
|
maxi black PEDAL SIDE chain guard! mounts right to the original cover bolt spots, steel, not plastic like original! rad
|
|
|
|
|
|
|
|
MLM puch maxi stainless steel PEDAL CHAIN GUARD - right side
|
HERE NOW!!
|
|
|
extremely stylish puch maxi / newport / L stainless steel pedal chain guard!! bolts to the original side cover bolt holes!
made in the usa baby!
|
|
|
|
|
|
|
|
Stage6 R/T mk1 70cc cylinder kit - HONDA HOBBIT
|
$735.00 alternate reality price $599.99
|
|
|
HERE NOW! complete Stage 6 "mk1" 70cc cylinder kit for piaggio LC scooters HONDA PA50 HOBBIT CAMINO!!! 20+ hp
out of the box with bolt on stage 6 components...high 20's with proper
tuning, port adjusting and guru mastery. absolutely insane!
|
|
|
|
|
|
|
|
stage 6 adapter plate for honda hobbit
|
HERE NOW!!
|
|
|
custom designed
base plate allows the stage 6 cylinder to bolt directly to hobbit cases,
with no case matching necessary at all. that's right, it all flows
perfectly right into the stock (but massive) honda hobbit side and top
transfer ports
|
|
|
|
|
|
|
|
18mm x 1mm water spigot / inlet / outlet for lc kits
|
HERE NOW!!
|
|
|
18mm water spigot / inlet / outlet for lc kits. yup. threads into the head or the cylinder.
|
|
|
|
|
|
|
|
stock puch maxi pipe RUBBER centerstand stopper thing
|
HERE NOW!!
|
|
|
this amazing piece of rubber goes into a small bracket located
underneath the stock puch maxi pipe to prohibit the centerstand from
smacking against the pipe.
|
|
|
|
|
|
|
|
puch e50 jammer clutch v6.4 - REPLACEMENT SHOES
|
HERE NOW!!
|
|
|
replacement shooz for your v6.4 jammer! 28g each!
set of three (3) shoes
|
|
|
|
|
|
|
|
water spigot for lc heads - 90 degree
|
|
HERE NOW! water spigot / inlet / outlet / fixture or whatever ya wanna call it for the MLM watercooled heads and the LC AC heads.
90 degree version
|
|
|
|
|
|
|
|
water spigot for lc heads - straight
|
|
HERE NOW! water spigot / inlet / outlet / fixture or whatever ya wanna call it for the MLM watercooled heads and the LC AC heads.
straight version
|
|
|
|
|
|
|
|
water spigot o-ring - LARGE
|
HERE NOW!!
|
|
|
LARGER of the two water spigot fittings o-rings for the MLM watercooled heads and the LC AC heads.
|
|
|
|
|
|
|
|
water spigot o-ring - SMALL
|
HERE NOW!!
|
|
|
smaller of the two water spigot fittings o-rings for the MLM watercooled heads and the LC AC heads.
|
|
|
|
|
|
|
|
90 deg water fitting FLANGE BOLT
|
HERE NOW!!
|
|
|
m6 x 50mm flange bolt for the 90 degree water fittings found on the LC ac and MLM water cooled heads.
|
|
|
|
|
|
|
|
MLM puch magnum techno EDM pipe - angle port
|
*sorry none today*
|
|
|
super quality collaboration of man and machine made circuit pipe from motion left mopeds!!
this pipe is specifically made to fit puch magnum with the stock angle
port cylinder!! this is an awesome pipe for stock cylinders!
|
|
|
|
|
|
|
|
puch moped new cables E50 one speed party pack - MAGNUM
|
|
HERE NOW! full party pack with all cables + knarps you need for ONE SPEED e50 puch MAGNUM and freespirit!!
party rules
|
|
|
|
|
|
|
|
puch E50 clutch race springs pack
|
$29.99 alternate reality price $19.99
HERE NOW!!
|
|
|
pack of e50 clutch springs. for racing. three different colors for three different stiffnesses.
***the
red springs are slightly too large in diameter to fit!!! you might be
able to get em to fit by sanding them down, but for now you're really
just gettin the blue and yellow sets. ***
|
|
|
|
|
|
|
|
stainless steel m6 button head bolt - 60mm
|
HERE NOW!!
|
|
|
m6 x 1.00 - 60mm long stainless steel button head bolt!
|
|
|
|
|
|
|
|
athena minarelli vertical 70cc 47.6mm cylinder kit - standard stroke
|
HERE NOW!!
|
|
|
air cooled aluminum minarelli vertical 70cc scooter kit by athena for pre-bug zuma and many many more!!
|
|
|
|
|
|
|
|
athena honda DIO 70cc 47.6mm cylinder kit
|
HERE NOW!!
|
|
|
air cooled aluminum honda DIO 70cc scooter kit by athena!
|
|
|
|
|
|
|
|
athena minarelli horizontal 70cc 47.6mm cylinder kit
|
*sorry none today*
|
|
|
athena air cooled 70cc cylinder kit + head for aprilia sr50, scarabeo, jog, zuma and many many more air cooled minarelli horizontal engines!
|
|
|
|
|
|
|
|
puch E50 case allen bolts set - ZINC
|
HERE NOW!!
|
|
|
set ZINC plated allen bolts for your puch E50 cases. this includes (8)
30mm M6 allen bolts + (5) 50mm M6 allen bolts. right + (4) 20mm M6 allen
bolts for your clutch cover. switch over to allen bolts. they are one
million times better that flat head screw driver, man.
|
|
|
|
|
|
|
|
athena minarelli vertical 70cc 47.6mm cylinder kit - LONG stroke
|
HERE NOW!!
|
|
|
air cooled aluminum minarelli vertical 70cc scooter kit by athena for pre-bug zuma and many many more!!
long stroke version with 12mm wrist pin
|
|
|
|
|
|
|
|
puch ms50 mv50 stock exhaust - complete with header
|
HERE NOW!!
|
|
|
replacement stock exhaust/muffler for the puch allstate ms50 campus 50 old timer moped thing!!
comes with chrome header and lil stinger guys!
|
|
|
|
|
|
|
|
puch E50 case CHEESE head bolts SET - stainless
|
|
HERE NOW!
set of stainless steel puch e50 case bolts/screws for all you CHEESE heads out there.
|
|
|
|
|
|
|
|
puch Z50 performance clutch spring - BLUE
|
HERE NOW!!
|
|
|
sicko mode new performance clutch spring for the rare manual shift puch Z50 engine!!
BLUE = 20% stiffer than stock!
|
|
|
|
|
|
|
|
puch Z50 performance clutch spring - RED
|
HERE NOW!!
|
|
|
sicko mode new performance clutch spring for the rare manual shift puch Z50 engine!!
RED = 70% stiffer than stock!
|
|
|
|
|
|
|
|
puch Z50 performance clutch tension bolt
|
*sorry none today*
|
|
|
sicko mode new performance tension bolt for the rare manual shift puch
Z50 engine!! i am no Z50 master, but this thing is sweet!!
allows
for ultimate clutch adjustment and durability for your ripper Z50
build! prolly does some cool stuff i don't even know about too hehe
|
|
|
|
|
|
|
|
puch maxi SIDE pipe - chrome
|
HERE NOW!!
|
|
|
stunning chrome side pipe for puch maxi! are you yearning for some hot rod flair? if so, this is the exhaust for you.
|
|
|
|
|
|
|
|
puch maxi SIDE pipe - black
|
HERE NOW!!
|
|
|
stunning black side pipe for puch maxi! are you yearning for some hot rod flair? if so, this is the exhaust for you.
|
|
|
|
|
|
|
|
puch MAXI cable set E50 - RED
|
HERE NOW!!
|
|
|
new replacement cable set for puch maxi, newport, nostalgia, etc... also works well on pinto, dart and swinger!
magnum, murray and freespirit require slightly longer cables. sorry!!
|
|
|
|
|
|
|
|
puch ZA50 1st gear treat clutch
|
*sorry none today*
|
|
|
you can now completely rebuild a two speed puch engine! Replace and tune your ZA50 clutches!
**achtung!! this version features a NEW improved stronger clutch lining** wow!!!
|
|
|
|
|
|
|
|
puch ZA50 2nd gear treat clutch
|
*sorry none today*
|
|
|
you can now completely rebuild a two speed puch engine! Replace and tune your ZA50 clutches!
**achtung!! this version features a NEW improved clutch lining** wow!!! who would have ever thought?
|
|
|
|
|
|
|
|
puch bing BLACK foam hi flow filter
|
HERE NOW!!
|
|
|
of course foam is better than those metal ones, right? yep.
|
|
|
|
|
|
|
|
puch bing RED foam hi flow filter
|
HERE NOW!!
|
|
|
of course foam is better than those metal ones, right? yep. in red too.
|
|
|
|
|
|
|
|
puch kickstart engine clutch gasket
|
HERE NOW!!
|
|
|
clutch side leaking? for puch kick start engines only!
|
|
|
|
|
|
|
|
puch magnum metal petcock - 16mm thread
|
HERE NOW!!
|
|
|
fits perfect o on any magnum or cobra! and any other moped or motorcycle with 16mm x 1mm threading
16mm x 1mm female thread on coupler nut
|
|
|
|
|
|
|
|
puch magnum SHORT RED petcock - 16mm thread
|
HERE NOW!!
|
|
|
push it to the limit with one a these
16mm x 1mm female thread on coupler nut
|
|
|
|
|
|
|
|
puch magnum LONG RED petcock - 16mm thread
|
HERE NOW!!
|
|
|
try a long red cock for puch magnum with extra reserve.
16mm x 1mm female thread on coupler nut
|
|
|
|
|
|
|
|
puch maxi & vespa ciao METAL petcock - 12mm thread
|
*sorry none today*
|
|
|
puch maxi moped METAL fuel petcock (vespa ciao too) for all puch maxi & newport and rockers
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
puch maxi GOLD petcock - 12mm thread
|
HERE NOW!!
|
|
|
golden puch maxi petcock for all puch maxi & newport mopeds!
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
puch moped 50cc cylinder treat kit for the people - version 1
|
HERE NOW!!
|
|
|
our updated version of the stock puch cylinder.
version 1
|
|
|
|
|
|
|
|
moped front brake cable
|
HERE NOW!!
|
|
|
front brake cable for all puch mopeds. This is compatible with most other mopeds, check your bike, check these cables and make your decision.
|
|
|
|
|
|
|
|
moped rear brake cable
|
HERE NOW!!
|
|
|
Super hi quality thick cable with heavy duty adjusters, way better than original.
|
|
|
|
|
|
|
|
puch moped square intake gasket
|
HERE NOW!!
|
|
|
single puch square port intake gasket
|
|
|
|
|
|
|
|
puch moped stock exhaust gasket
|
HERE NOW!!
|
|
|
20mm ID
|
|
|
|
|
|
|
|
puch E50 lightened starter clutch plate
|
HERE NOW!!
|
|
|
lightened late edition puch E50 race clutch start plate
totally compatible with all E50 engines except those found on darts and ASTRO austro daimlers
|
|
|
|
|
|
|
|
puch E50 clutch starter plate CLIP ring
|
HERE NOW!!
|
|
|
a necessity for all clutches
|
|
|
|
|
|
|
|
puch bing METAL hi flow filter
|
HERE NOW!!
|
|
|
metal hi flow filter for bing 12mm 14mm and 15mm carburetors as commonly found on ALL puch mopeds.
|
|
|
|
|
|
|
|
puch moped 50cc head gasket - 0.4mm thickness
|
HERE NOW!!
|
|
|
50cc head gasket for puch mopeds. fits all puch e50, za50, z50, etc!!!
0.40mm thickness
|
|
|
|
|
|
|
|
puch maxi moped WHITE stickers
|
HERE NOW!!
|
|
|
oh, a set of white decals.
note these are not decals, but stickers. for the budget minded folk
|
|
|
|
|
|
|
|
puch maxi moped BLACK stickers
|
HERE NOW!!
|
|
|
oh, a set of black stickers.
note these are not decals, but stickers. for the budget minded folk
|
|
|
|
|
|
|
|
OEM puch "treat clutch" BLUE spring 3 shoe adjustable super racer clutch
|
*sorry none today*
|
|
|
OEM 3 shoes clutch with blue springs for higher tension and more spin out performance
|
|
|
|
|
|
|
|
ATOMIC puch ZA50 shift dampers
|
HERE NOW!!
|
|
|
tested to the apocalypse and back, these are proven bulletproof and
approved by the thrashers in san jose so they will not let you down.
priced for people n zombies, not bourgeoisiesssssss.
replaces puch part # 321.1.13.703.1
|
|
|
|
|
|
|
|
puch 70cc treat kit replacement PISTON + more - version I
|
HERE NOW!!
|
|
|
VERSION I = ring placement pin on the top middle, so it runs through any intake windows.
puch 70cc treat kit V1 replacement piston. uh oh, you seized. 45mm piston
|
|
|
|
|
|
|
|
bing carburetor float PIN
|
HERE NOW!!
|
|
|
the pin that holds the float on.
|
|
|
|
|
|
|
|
Puch moped bing carburetor FLOAT NEEDLE valve
|
HERE NOW!!
|
|
|
vital component to carburetion. for all puch moped bing carburetors and most sachs square bings too.
|
|
|
|
|
|
|
|
puch bing carburetor FLOAT
|
HERE NOW!!
|
|
|
float for the bing found on all the puch mopeds you know and love
|
|
|
|
|
|
|
|
bing carburetor fuel inlet banjo gaskets x2
|
HERE NOW!!
|
|
|
for stock bing carburetors 12mm through 14mm varieties with the banjo style fuel inlet. found on most all puch mopeds and other beasties.
|
|
|
|
|
|
|
|
puch maxi moped GOLD stickers
|
HERE NOW!!
|
|
|
goooooooooooooooooooold
note these are not decals, but stickers. for the budget minded folk
|
|
|
|
|
|
|
|
puch gilardoni 74cc cylinder reed block kit with NO HEAD
|
*sorry none today*
|
|
|
no head with this one.
|
|
|
|
|
|
|
|
axle spacer for puch moped 12mm sealed bearing axle and whatever else
|
HERE NOW!!
|
|
|
axle spacer for puch 12mm sealed bearing axle. use also on any sealed bearing axle or loose bearing axle
|
|
|
|
|
|
|
|
bing carburetor top n float bowl n banjo gaskets set
|
|
complete set includes the top gasket, the float bowl gasket and the fuel inlet 'banjo' gaskets all combined for one perfecto price.
for stock bing carburetors 12mm through 14mm varieties with the banjo style fuel inlet.
|
|
|
|
|
|
|
|
puch moped BLACK side bars frame rails guard yer maxi
|
HERE NOW!!
|
|
|
stay on guard, pick up your maxi. black side bars. frame rails, what you wish
|
|
|
|
|
|
|
|
puch E50 clutch shim small
|
|
In Stock! Maybe click to check available sizes.
most E50 one speed puch engines have two clutch spacers or shims on either side of the clutch bell. get everything to fit right for super high rpm.
OD = 21mm - ID = 15mm - choose thickness
|
|
|
|
|
|
|
|
puch E50 clutch shim large
|
|
In Stock! Maybe click to check available sizes.
most E50 one speed puch engines have two clutch spacers or shims on either side of the clutch bell. get everything to fit right for super high rpm.
OD = 24mm - ID = 17mm - choose thickness
|
|
|
|
|
|
|
|
puch ZA50 original two speed clutch gasket
|
HERE NOW!!
|
|
|
clutch gasket for puch ZA50 two speed engines.
|
|
|
|
|
|
|
|
puch moped front fork lock n key set
|
HERE NOW!!
|
|
|
lock n key set for puch moped front fork locks. replace the entire lock cause you'll never find the right keys for these things. the finishing touch for complete restoration! handy front fork lock too!
|
|
|
|
|
|
|
|
puch moped 50cc cylinder treat kit for the people + hi hi head party
|
|
par T pak - 50cc kit + 50cc hi hi head!
+ complete gasket set!!
party rules
|
|
|
|
|
|
|
|
puch E50 clutch e clip
|
HERE NOW!!
|
|
|
one e clip.
as found on the 3 shoe race clutch
|
|
|
|
|
|
|
|
puch E50 clutch pad
|
HERE NOW!!
|
|
|
clutch arm for puch E50 one speed clutches - use em on 2 shoe, 3 shoe, kick start, performance, stock. . .
whatever
as found on the 3 shoe race clutch
you get one
|
|
|
|
|
|
|
|
bing carburetor CHOKE slide
|
HERE NOW!!
|
|
|
for 12 - 15mm bing carburetors. choke slide. for chokin off your air flow.
|
|
|
|
|
|
|
|
bing carburetor float BOWL
|
HERE NOW!!
|
|
|
bowl for 12-15 bingz.
|
|
|
|
|
|
|
|
bing carburetor NEEDLE
|
HERE NOW!!
|
|
|
the needle you need if you need a needle for a 12-15 bing.
|
|
|
|
|
|
|
|
bing carburetor THROTTLE slide
|
HERE NOW!!
|
|
|
for 12 - 15mm bing carburetors.
|
|
|
|
|
|
|
|
bing idle screw and spring
|
|
since yours fell off on the road somewhere.
|
|
|
|
|
|
|
|
bing slide SPRING
|
HERE NOW!!
|
|
|
boing.
|
|
|
|
|
|
|
|
bing carb top CAP
|
HERE NOW!!
|
|
|
top cappin.
|
|
|
|
|
|
|
|
bing carb brass fuel inlet
|
HERE NOW!!
|
|
|
brass fuel inlet for 15mm bing carburetors
|
|
|
|
|
|
|
|
bing carb choke pull pin
|
HERE NOW!!
|
|
|
for proper operation of your choke.
|
|
|
|
|
|
|
|
bing carburetor banjo BOLT
|
HERE NOW!!
|
|
|
banjo or fuel inlet bolt for bing carburetors. special hollow bolt found on stock bing carburetors on puch mopeds.
|
|
|
|
|
|
|
|
puch ZA50 clutch side case bearing - 6002
|
HERE NOW!!
|
|
|
this is the bigger of the two bearings that are embedded in the clutch side of the ZA50 case, you know what i'm sayin.
|
|
|
|
|
|
|
|
OEM round bing carb atomizer - pick yer size
|
|
HERE NOW! click to check available sizes.
oem original bing atomizers for bing carburetors as found on your favorite puch mopeds!
|
|
|
|
|
|
|
|
puch moped 70cc gasket set - the good one
|
HERE NOW!!
|
|
|
puch moped gasket set including everything shown. this is the good set. it comes with thin paper base gasket, 70cc metal head gasket, large black metal lined exhaust gasket and square port intake gasket.
|
|
|
|
|
|
|
|
puch E50 clutch arm washer / spacer
|
*sorry none today*
|
|
|
spacer / washer for puch E50 clutch arms. 2 shoe and three shoe clutches have these under each clutch arm to space it out right.
ID = 10mm - OD = 17mm
|
|
|
|
|
|
|
|
puch dellorto SHA carburetor DELUXE party pack
|
|
HERE NOW! everything you need to escape the bing!
party rules
|
|
|
|
|
|
|
|
puch maxi short ALL BLACK side kickstand
|
HERE NOW!!
|
|
|
it's about 10.75" and alllll black!
|
|
|
|
|
|
|
|
bing carburetor fill button
|
HERE NOW!!
|
|
|
the button you push to fill the bowl with gas. yep
|
|
|
|
|
|
|
|
bing carburetor BANJO
|
HERE NOW!!
|
|
|
banjo fuel inlet for 12mm - 15mm bing carburetors!
|
|
|
|
|
|
|
|
puch moped maxi S tank decals
|
HERE NOW!!
|
|
|
oh my, who's seen my maxi s? i need to resticker it. oh my
|
|
|
|
|
|
|
|
puch E50 clutch cover lever
|
HERE NOW!!
|
|
|
puch E50 clutch cover lever..... i think that's all i have to say...
need a clip?
|
|
|
|
|
|
|
|
teflon TREATed front brake cable - special cable for special people
|
HERE NOW!!
|
|
|
NEWS NEWS NEWWW NEWWW NEWWWW AWESOME!!!! i would like to introduce our new special teflon TREATed front brake cable for special people.. here at treatland we get lots of responses, demands, threats and so on etc etc... and.. most of the time we spend endless hours thinking about all the things you say... so, here it is you've all been waiting for it, it has finally arrived.. new improved modified customized special treatshq, treatland, treats headquarters made by elven hands teflon TREATed brake cable. oh wow
|
|
|
|
|
|
|
|
teflon TREATed rear brake cable - special cable for special people
|
HERE NOW!!
|
|
|
NEWS NEWS NEWWW NEWWW NEWWWW AWESOME!!!! i would like to introduce our new special teflon TREATed rear brake cable for special people.. here at treatland we get lots of responses, demands, threats and so on etc etc... and.. most of the time we spend endless hours thinking about all the things you say... so, here it is, you've all been waiting for it, it has finally arrived.. new improved modified customized special treatshq, treatland, treats headquarters made by elven hands teflon TREATed brake cable. oh wow
|
|
|
|
|
|
|
|
puch E50 stock starter clutch plate
|
HERE NOW!!
|
|
|
puch e50 stock stater clutch plate for any and all e50 one speed motors except kick start motors of course..
may be raw steel OR zinc plated
|
|
|
|
|
|
|
|
puch E50 starter clutch shaft UPPER circlip
|
HERE NOW!!
|
|
|
puch E50 starter clutch lever upper circlip, for holding that lever firm in place!
|
|
|
|
|
|
|
|
vespa piggio ciao OMG petcock - 12mm thread
|
HERE NOW!!
|
|
|
OMG petcock specifically for vespa piaggio ciao mopeds. use on puch maxi and neport as well. the fuel filter sicks out a little more on this one than the regular maxi cock.
fuel flows straight down - for 5mm fuel line
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
puch maxi OMG petcock - 12mm thread
|
HERE NOW!!
|
|
|
OMG puch maxi petcock with black lever for all puch maxi & newport mopeds. this also works on the vespa ciao. or you can see the ciao specific cock here
fuel flows straight down - for 5mm fuel line
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
puch magnum OMG petcock - down flow - 16mm thread
|
HERE NOW!!
|
|
|
fits perfect o on any magnum! OMG top of the line quality. ooooohhh magnum gods bless thee o cock you have given us
fuel flows straight down - for 5mm fuel line
16mm x 1mm female thread on coupler nut
|
|
|
|
|
|
|
|
puch magnum OMG petcock - back flow - 16mm thread
|
*sorry none today*
|
|
|
fits perfect o on any magnum! OMG top of the line quality.
fuel flows out to the back - for 5mm fuel line
16mm x 1mm female thread on coupler nut
|
|
|
|
|
|
|
|
OMG vintage cube petcock - 16mm thread
|
*sorry none today*
|
|
|
this is nicest cock of them all! vintage motorcycle style steel cube petcock fuel tap. use on puch magnum or any other moped that uses 15mm x 1mm petcocks + use this on many different vintage motorcycles.
fuel flows down - for 6mm fuel line
16mm x 1mm female thread on coupler nut
|
|
|
|
|
|
|
|
puch ZA50 starter clutch shim USED
|
HERE NOW!!
|
|
|
puch za50 starter clutch shim in used condition, just in case you lost yours and need a new one. we got em now!
|
|
|
|
|
|
|
|
puch 70cc tccd replacement piston - 45mm
|
HERE NOW!!
|
|
|
puch 70cc tccd kit replacement piston. uh oh, you seized.
|
|
|
|
|
|
|
|
puch E50 clutch cover
|
*sorry none today*
|
|
|
puch E50 clutch cover..... i think that's all i have to say...
|
|
|
|
|
|
|
|
puch moped maxi K tank decals
|
HERE NOW!!
|
|
|
oh my, who's seen my maxi k? i need to resticker it. oh my cooler or not cooler than the maxi s decals, depending on what letters you like better
|
|
|
|
|
|
|
|
puch moped maxi nostalgia tank decals
|
HERE NOW!!
|
|
|
nostalgia tank decals for any n all puch maxis needing a restickering
|
|
|
|
|
|
|
|
puch moped maxi tank decals
|
HERE NOW!!
|
|
|
maxi tank decals in original puch colors, comes with a protective coating to keep it safe till ya sticker
|
|
|
|
|
|
|
|
puch moped weltmeister decal
|
*sorry none today*
|
|
|
puch moped weltmeister decal, translates as world champion, but i think MASTER OF THE WORLD is more appropriate hmm
yeh its an expensive sticker, but we can't have everyone runnin around thinkin they are master of the world.
|
|
|
|
|
|
|
|
malossi puch + tomos metal lined exhaust gasket
|
HERE NOW!!
|
|
|
malossi metal lined large size exhaust gasket for puch, tomos and other mopeds
|
|
|
|
|
|
|
|
ATOMIC - puch ZA50 oil fill PLUG
|
*sorry none today*
|
|
|
puch za50 oil fill plug! its rubber!
made by our wonderful ATOMIC friends!
|
|
|
|
|
|
|
|
taykoff puch ZA50 white clutch cover gasket
|
HERE NOW!!
|
|
|
"straight from the cornfields of Lincoln Nebraska"
.012 inch thick
|
|
|
|
|
|
|
|
puch ZA50 two speed + derbi flat reed input shaft seal 20 x 35 x 7 - double lip
|
HERE NOW!!
|
|
|
puch za50 clutch side + derbi flat reed input shaft + final drive shaft seal in suzuki fa50!
|
|
|
|
|
|
|
|
puch monza white n green n blue tank decals
|
HERE NOW!!
|
|
|
white n green n blue new decals for puch monza!
|
|
|
|
|
|
|
|
puch moped front sprockets
|
|
HERE NOW! front sprocket for all puch mopeds. we carry 10, 11, 12, 13, 15, 15, 16, 17 and 18!
check the drop down menu for what's in stock!
|
|
|
|
|
|
|
|
puch MV50 decal sticker with flowers
|
*sorry none today*
|
|
|
puch MV50 sticker decal with flowers for pretty much anything ya like..
|
|
|
|
|
|
|
|
puch monza oil ratio decal sticker
|
HERE NOW!!
|
|
|
translation - " Fuel oil mixture 1:50 in-use of 2 stroke motor oil "
|
|
|
|
|
|
|
|
puch E50 kick start clutch cover
|
*sorry none today*
|
|
|
puch E50 kick start clutch cover in the nude..
|
|
|
|
|
|
|
|
malossi SNR 6002 C3 bearing for puch ZA50 case clutch side
|
HERE NOW!!
|
|
|
this is the bigger of the two bearings that are embedded in the clutch side of the ZA50 case, only this time its the malossi version, you know what i'm sayin.
6002 C3
|
|
|
|
|
|
|
|
puch maxi fork triple tree top bolt and washer
|
|
you know those two bolts on the top of a puch maxi front fork? yup!!
|
|
|
|
|
|
|
|
ATOMIC - puch za50 oil injection block-off plate
|
*sorry none today*
|
|
|
even comes with a gasket!! don't just let it drip and cause leaks, plug it up duderz!
|
|
|
|
|
|
|
|
malossi SNR 6005 C3 middle case bearing for puch ZA50
|
*sorry none today*
|
|
|
middle case counter shaft bearing for the puch ZA50 case. ok, got it? only this time its the malossi version, you know what i'm sayin, yeah its better.
6005 C3
|
|
|
|
|
|
|
|
puch maxiplus RED tank decal
|
HERE NOW!!
|
|
|
clear maxi PLUS sticker with red lettering, from the 80s era of maxi production
|
|
|
|
|
|
|
|
puch maxiplus GOLD tank decal
|
HERE NOW!!
|
|
|
clear maxi PLUS sticker with gold lettering, from the 80s era of maxi production
|
|
|
|
|
|
|
|
maxi young club decal
|
HERE NOW!!
|
|
|
MAXI YOUNG CLUB
|
|
|
|
|
|
|
|
fuel reserve RES-ZU-AUF decal sticker
|
HERE NOW!!
|
|
|
a sticker to remind you which way your reserve goes, clever..
|
|
|
|
|
|
|
|
puch DREI 3 GANG decal sticker
|
HERE NOW!!
|
|
|
puch DREI 3 GANG
|
|
|
|
|
|
|
|
steyr puch decal sticker
|
HERE NOW!!
|
|
|
steyr + puch
|
|
|
|
|
|
|
|
puch moped stock seat post SPRING
|
HERE NOW!!
|
|
|
replaces the original stock puch maxi seat post spring and possibly many more
make it nice n bouncy again
|
|
|
|
|
|
|
|
puch e50 return SPRING for clutch cover arm
|
*sorry none today*
|
|
|
you know where this goes right? under the lever inside the clutch cover on E50 for that nice springy return
|
|
|
|
|
|
|
|
OEM square bing PUCH float pin
|
HERE NOW!!
|
|
|
OEM float pin for type 18 square bing carburetors as found on puch korados and austro daimlers.
|
|
|
|
|
|
|
|
puch E50 kick start engine return spring
|
HERE NOW!!
|
|
|
return spring for your puch e50 kick start lever!
|
|
|
|
|
|
|
|
USED puch E50 clutch cover
|
HERE NOW!!
|
|
|
USED puch E50 clutch cover..... i think that's all i have to say...
|
|
|
|
|
|
|
|
ATOMIC - puch maxi airbox hole cover
|
*sorry none today*
|
|
|
what do you do with that random hole on the side of your maxi or newport? actually, dont tell us...it's time to cover it up. verry fancy my friend!
|
|
|
|
|
|
|
|
ATOMIC - puch maxi airbox hole cover WITH switch
|
HERE NOW!!
|
|
|
what do you do with that random hole on the side of your maxi or newport? actually, dont tell us...it's time to cover it up. verry fancy my friend!
this version has an on/off switch too!!
|
|
|
|
|
|
|
|
puch E50 kick starter lever
|
HERE NOW!!
|
|
|
kick starter lever for your puch e50 kick start motor!
|
|
|
|
|
|
|
|
puch rear brake pedal lever with rod
|
HERE NOW!!
|
|
|
rear pedal brake lever with rod for some rad puch mopeds and many more!
for hackerz n tunnerzz!!
|
|
|
|
|
|
|
|
USED puch E50 cases
|
$99.99 alternate reality price $89.99
HERE NOW!!
|
|
|
USED puch E50 cases with just one m7 cylinder stud..interesting
|
|
|
|
|
|
|
|
USED puch E50 clutch starter plate CLIP ring
|
HERE NOW!!
|
|
|
a necessity for all clutches
this one is an original used ring!
|
|
|
|
|
|
|
|
USED puch e50 clutch shim - small
|
HERE NOW!!
|
|
|
used original e50 clutch shim! this is the smaller of the two shims on either side of the clutch bell.
ID = 15.5mm - OD = 22mm - Thickness = 1.70mm
|
|
|
|
|
|
|
|
USED puch e50 clutch shim - large
|
HERE NOW!!
|
|
|
used original e50 clutch shim! this is the larger of the two shims on either side of the clutch bell.
ID = 17.20mm - OD = 24mm - Thickness = 1.65mm
|
|
|
|
|
|
|
|
pedal arm set for your moped and his and hers and mine too - CHROME
|
HERE NOW!!
|
|
|
chrome pedal arm set exactly like stock puch magnum ones, but use these on your moped his moped her moped and hey why not my moped too. yeah anything is what i'm sayin.
best quality coating and threads i've seen on pedal arms in awhile + extra clearance too!
|
|
|
|
|
|
|
|
pedal arm set for your moped and his and hers and mine too - BLACK
|
HERE NOW!!
|
|
|
black pedal arm set exactly like stock puch magnum ones, but use these on your moped his moped her moped and hey why not my moped too. yeah anything is what i'm sayin.
best quality coating and threads i've seen on pedal arms in awhile + extra clearance too!
|
|
|
|
|
|
|
|
bing idle screw
|
HERE NOW!!
|
|
|
since yours fell off on the road somewhere and then you were screwed!
|
|
|
|
|
|
|
|
bing idle screw SPRING
|
HERE NOW!!
|
|
|
since yours fell off on the road somewhere and then you were screwed! I mean sprung??....
|
|
|
|
|
|
|
|
BLEIFREI decal sticker
|
HERE NOW!!
|
|
|
BLEIFREI
|
|
|
|
|
|
|
|
puch magnum PURPLE decal set
|
HERE NOW!!
|
|
|
outstanding, to say the least. the perfect finishing touch for your puch magnum. purple!!!
|
|
|
|
|
|
|
|
puch magnum RED decal set
|
HERE NOW!!
|
|
|
outstanding, to say the least. the perfect finishing touch for your puch magnum. red!!!
|
|
|
|
|
|
|
|
MLM puch metal base plate spacer
|
|
motion left mopeds metal base plate spacers for puchs with stock size bores (38mm-46mm)! comes in many sizes!
|
|
|
|
|
|
|
|
MLM puch metal base plate spacer for gila, parma, metra and eurokit
|
|
motion left mopeds metal base plate spacers for puchs with oversize bores (47mm) like the gilardoni, parmakit, eurokit, and metrakits! comes in many sizes!
|
|
|
|
|
|
|
|
ATOMIC - magnetic puch E50 degree wheel
|
*sorry none today*
|
|
|
magnetic degree wheel for your puch e50!
|
|
|
|
|
|
|
|
super nice DELUXE puch stock maxi black seat
|
*sorry none today*
|
|
|
NEW puch DELUXE super nice stock black seat for maxi just like the original one! a perfect replacement in fact. not hella puffy just normal puffy. this version even has a plastic trunk on the base, like some original maxi seats.
for sure one of the nicest seats i have seen in a long time and a perfect replacement for not just maxi but any bike needing a single seat.
|
|
|
|
|
|
|
|
puch moped stock maxi pipe gasket in the shape of a BIG CIRCLE
|
HERE NOW!!
|
|
|
new gasket for stock puch maxi exhaust pipes and what ever other puch exhaust pipes use this kind of gasket.
|
|
|
|
|
|
|
|
puch red and white wings decal
|
HERE NOW!!
|
|
|
this one is rad. no messin around. some serious wings, for masters.
|
|
|
|
|
|
|
|
puch letters atop the crest decal
|
HERE NOW!!
|
|
|
ballast of kings. armour of knights. sign of the brave.
|
|
|
|
|
|
|
|
puch maxi stock seat POST
|
HERE NOW!!
|
|
|
***NEW version, unlike the old one! works perfecto this time around...check out the photo!***
both a seat post and a critical tool for all mopeders!
|
|
|
|
|
|
|
|
USED puch ROUND port 12mm intake for bing carburetors - e50
|
*sorry none today*
|
|
|
stock 12mm intake
round port!!
|
|
|
|
|
|
|
|
USED puch SQUARE port 12mm intake for bing carburetors - e50
|
*sorry none today*
|
|
|
stock 12mm intake
square port!!
|
|
|
|
|
|
|
|
ATOMIC - cable stay for any moped
|
*sorry none today*
|
|
|
streamline your cabling with these sick little devices...perfect for maxi rear brake cable, or pretty much anywhere on any moped ever
|
|
|
|
|
|
|
|
puch monza M50 black and white decal set
|
*sorry none today*
|
|
|
puch monza M50 decal set black n white
|
|
|
|
|
|
|
|
puch moped stock WHITE top black seat
|
HERE NOW!!
|
|
|
white top..... black sides
|
|
|
|
|
|
|
|
puch airsal 72cc 46mm piston
|
HERE NOW!!
|
|
|
puch airsal 72cc 46mm replacement piston
|
|
|
|
|
|
|
|
puch airsal 70cc 45mm replacement piston
|
HERE NOW!!
|
|
|
puch airsal 70cc 45mm replacement piston. this is for the puch airsal 70cc kit + other kits too
|
|
|
|
|
|
|
|
puch pinup decal
|
HERE NOW!!
|
|
|
now boys, don't tell mom what you found.
|
|
|