custom cut 45mm O-RING high compression head - for puch PISTON PORT treat kit!! - sport touring
custom cut 45mm O-RING high compression head - for puch PISTON PORT treat kit!! - sport touring
 



  $55.99

 :HERE NOW!!
qty:



here's what ya get in this PARTYYY!:

 
 
custom cut squish 45mm head specifically designed for the classic piston port treat kit! that's right, the squish angle is is perfectly cut for the treat kit piston dome!

this one is cut to sport touring specs meaning it has a pinch less compression and is more suited for your daily rider.

now that the squish is all perfecto, just adjust the final squish distance with base gasket thickness to really get things dialed.

its what you've been waiting for your whole life !!!! no MORE head gaskets!! just this O-RING !!!!!

••take note these heads DO NOT work on some cylinders that have a decomp hole or that don't have enough surface area to seal properly, if you have any of these cylinders this head will not work - stock A35 cylinder, puch airsal 38mm, puch airsal 44mm, puch airsal 45mm, & puch polini 64cc•• well unless you tap, set screw, and fill n lap!

***note that there is some very small pitting from the initial casting of the heads. it will not affect the performance do not fret***

sealing surface is 53mm so anything wider than that will work perfecto!

includes 1 o-ring

  rate this moped part be the first!