custom cut 43.5mm high compression O-RING head - for PUCH POLINI - super street
custom cut 43.5mm high compression O-RING head - for PUCH POLINI - super street
 
  $68.99


qty:



here's what ya get in this PARTYYY!:
 
 
custom cut squish 43.5mm head specifically designed for the famous puch polini kit! that's right, the squish angle is is perfectly cut for the polini piston dome profile!

this one is cut to super street specs meaning it has a pinch more compression and is more suited for your super ripper setup!

these heads have been machined to have a squish of 1.00mm when using the original polini base gasket! want a lil less compression? slap a slightly thicker base gasket on there!! want more compression? slap a slightly thinner base gasket on there!

this is an O-RING head!

the groove will clear the decomp channel, but to be safe, i would suggest tapping the decomp hole, installing a set screw, epoxying over it then sanding it flush. well worth the effort! included is a FREE set screw from WILL's personal stash. no one told him, shhhhhhh....hehehe

***note that there is some very small pitting from the initial casting of the heads. it will not affect the performance do not fret***

  rate this moped part be the first!