custom cut 45mm O-RING high compression head - for TREAT REED - COUNTERSUNK!!! - AIRSAL STYLE - SUPER STREET
custom cut 45mm O-RING high compression head - for TREAT REED - COUNTERSUNK!!! - GILA STYLE
 



  $65.99

 :*sorry none today*
qty:



here's what ya get in this PARTYYY!:

 
 
custom cut COUNTERSUNK 45mm head specifically designed for the puch treat reed kit ! that's right, the squish is spot on for the teflon and regular 45mm treat reed piston.

this one is cut to super street specs meaning it has a pinch more compression and is more suited for your super ripper setup!

this one is made from an airsal head but machined for treat reed so you can get the big old fins and better cooling if the airsal is what you prefer!


these heads have been machined to have a squish of 1.00mm when using the original treat reed base gasket! in order to do this the head has been countersunk so that the dome actually extends into the cylinder about 0.8mm. the technology these days. wow!!! keep in mind that the 0.8mm lip NEEDS to be centered upon installation. when installing the head just be extra careful and make sure it seats properly or you risk damaging the cylinder and head when you go to torque it to spec.

want a lil less compression? slap a slightly thicker base gasket on there!! want more compression? slap a slightly thinner base gasket on there!

includes one O-RING of course

***note that there is some very small pitting from the initial casting of the heads. it will not affect the performance do not fret***

  rate this moped part be the first!