taco eater :
Nick KingoftheRockies from Thornton, CO United States
Ripper kit. Don't listen to the moped kids that can't light a fart, this kit is the real deal. Run it on a tall gear ZA50 and stock crank for ultimate safety, run it on a stuffed crank e50 and let that bitch rev to the moon, put it in your 1995 Toyota Paseo and that shit will rip too. Best Puch kit if you're too afraid of boring your cases for a Eurokit. Blaster bud!
Was this review helpful to you?
0 taco eaters like this review
Great kit, WONT WORK WITH CIRCUIT PIPES
Friday, February 24, 2023
taco eater :
Ascoute, Zeros from Toledo, OH United States
Uhggg you know I’m running one of these matches to Korado and it’s doing like 55 on those tiny 16in wheels, so I could have checked, but I didn’t because I’m a dummy.
The fins are to big, so unless you wanna hack em off use an Estoril for more low end.
Also as a few review have mentioned, use at least a 1mm spacer depending on how aggressive you want your squish
Was this review helpful to you?
2 taco eaters like this review
Best bang for the buck!
Wednesday, November 12, 2014
taco eater :
derek stahl blkblk from Denver, CO United States
This I my favorite kit under $200. It takes work, sure, but well worth the little effort. It needs a base spacer, I use 1mm, no paper. It likes Estoril/technigas next, low-mid pipes. I've run 16sha, 19phbg and 19oko, all with great success. Estoril, 19phbg and mild porting netted 6.1hp @ 9,500 on the dyno. I have lots of miles on few of these; it's not the kit that siezes it's the builder and rider that siezes them.
Was this review helpful to you?
0 taco eaters like this review
DON'T DO IT!
Thursday, April 18, 2013
taco eater :
Derish Vulfhousin from guilford, CT United States
If you enjoy exploding things you'll LOVE this kit! Even with a very rich mixture and extra oil and a long break in period at idle It still managed to seize after 35 miles. The whole kit isn't that great of quality. Learn from others mistakes. Buy a reliable kit!
Was this review helpful to you?
1 taco eaters like this review
love the big cooling fins
Monday, December 31, 2012
taco eater :
Brian Scarborough from coral springs, FL United States
got my kit cleaned up the ports and transfers / case matched - be carefull on the transfers to leave enough to seal up with - im using a 2mm aluminum base spacer to get correct piston height at the bottom of the ports. for the money - this kit is fantastic. been using amsoil saber, its a great kit if you take the time to clean it up right before you install it. the large fins on this kit do a great job of cooling. im using vm18 with this. id recomend at least a vm20 or bigger for it if you want all out top speed. i mean who rides around at 35mph anyways right ?
Sick as fuck boy 
DON'T DO IT!