|
|
|
|
|
|
HPI CDI mini rotor ignition system for puch tomos sachs and derbi
|
HERE NOW!!
|
|
|
new HPI CDI mini rotor ignition for ALL puch mopeds, E50 - ZA50 whatever ya got. so this new mini external rotor is actually lighter than the HPI internal rotor!
features built in lights for direct light hook up with no problemos.
this ignition is compatible with all puch, sachs 505, tomos a35/a55, kreidler, zundapp, batavus, derbi variant, derbi GPR. all derbi 4 speed engines like coppa, c4, FDS, FD, FDX, savannah, diablo and on and on! !!
|
|
|
|
|
|
|
|
|
|
puch za50 e50 CDI stator and magneto + derbi + sachs 505
|
|
HERE NOW!!
|
|
|
this is just the magneto and the stator plate for all the experimentalists that want to use the CDI box of their choice. we have complete sets available also
|
|
|
|
|
|
|
|
|
|
sachs 505 moped CDI complete vision quest kit
|
|
|
HERE NOW! complete CDI kit for sachs 505 engines - it includes everything shown - the stator, the magneto, and the high rpm cdi box n 12 volt coil combo!
|
|
|
|
|
|
|
|
|
|
puch CDI full stator plate
|
|
HERE NOW!!
|
|
|
just the stator plate full of all the coils and pick ups and wires and such for all the experimentalists that want to use the CDI box of their choice. we have complete sets available also
puch E50, ZA50, derbi + sachs 505 mopeds. more possibly too.
|
|
|
|
|
|
|
|
|
|
puch CDI flywheel magneto
|
|
HERE NOW!!
|
|
|
just the flywheel. we have complete sets available also
puch E50, ZA50, derbi + sachs 505 mopeds. more possibly too.
|
|
|
|
|
|
|
|
|
|
puch e50 CDI complete adventure pack - VERSION 2
|
|
|
HERE NOW! complete adventure puch cdi for the people with upgraded cdi box and voltage regulator! complete!!
|
|
|
|
|
|
|
|
|
|
puch ZA50 + sachs 505 + tomos powerdynamo CDI - 12v / 100w DC
|
$425.00 alternate reality price $375.00
HERE NOW!!
|
|
|
magnet based generator with integrated fully electronic ignition. output at 12 volts / up to 100 watts DC. solid state. maintenance free, electronic ignition!
|
|
|
|
|
|
|
|
|
|
OEM square bing SACHS float pin
|
|
HERE NOW!!
|
|
|
OEM float pin for type 85 square bing carburetors as found on sachs 504 and 505
|
|
|
|
|
|
|
|
|
|
dual spring rate progressive adjustable shocks with EGOBOOST™ technology- 290mm - 310mm in BLACK
|
|
HERE NOW!!
|
|
|
these 290mm to 310mm shocks are packed with so many features you'll surely tldr the description.
perfecto for maxi swinger pinto cobra tomos and more more more more more!
|
|
|
|
|
|
|
|
|
|
fully BLACK adjustable shocks - 300mm
|
|
HERE NOW!!
|
|
|
these shocks are 300mm and will work perfectly on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc.
|
|
|
|
|
|
|
|
|
|
dual spring rate progressive adjustable shocks with EGOBOOST™ technology- 350mm - 370mm in BLACK
|
|
HERE NOW!!
|
|
|
these 350mm to 370mm shocks are packed with so many features you'll surely tldr the description.
perfecto for magnum n custom builds n serious upgrade for your Onyx RCR.
|
|
|
|
|
|
|
|
|
|
black n white TUXEDO adjustable shocks - 300mm
|
|
HERE NOW!!
|
|
|
these shocks are 300mm and will work perfectly on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc.
|
|
|
|
|
|
|
|
|
|
ltd edition NEON GREEN adjustable shocks - 300mm
|
|
HERE NOW!!
|
|
|
hot boy 80's style rad shox brought to you by TREATLAND in the pursuit of maximum funtime!!!
YASSSS!!!!
|
|
|
|
|
|
|
|
|
|
ltd edition NEON PINK adjustable shocks - 300mm
|
|
HERE NOW!!
|
|
|
hot boy 80's style rad shox brought to you by TREATLAND in the pursuit of maximum funtime!!!
YASSSS!!!!
|
|
|
|
|
|
|
|
|
|
fully BLACK adjustable shocks - 310mm
|
|
HERE NOW!!
|
|
|
these shocks are 310mm and give u a lil more height on on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc.
|
|
|
|
|
|
|
|
|
|
BLACK n chrome adjustable shocks - 310mm version 2
|
|
*sorry none today*
|
|
|
these shocks are 310mm and give u a lil more height on on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc.
version 2 aka they have bits of unpainted aluminum
|
|
|
|
|
|
|
|
|
|
SACHS super special STARTER / DECOMP cable
|
|
HERE NOW!!
|
|
|
what have you been doing with your sachs before this cable?? i dont wanna know!!!
brand new specially made cable that splits into a mini little cable at the end that goes between the decomp an starter lever so when you give er a pull, it opens up both at the same time! WOW thats some sick tech
|
|
|
|
|
|
|
|
|
|
NOS sachs S sticker
|
|
HERE NOW!!
|
|
|
new old stock sachs "S" sticker. pretty cool S. ive seen some other cool S's but this one is pretty good
about 35mm x 45mm
|
|
|
|
|
|
|
|
|
|
NOS OEM silver vespa GRANDE decal
|
|
*sorry none today*
|
|
|
NOS new old stick
its has a rather nice silver metalflake silver appearance. this is original, from the good ol daze!
about 165mm x 40mm
|
|
|
|
|
|
|
|
|
|
NOS vespa silver fuel on / off / reserve sticker for ALL
|
|
HERE NOW!!
|
|
|
fit this over your petcock to remind yourself the positions of the lever...well, if it goes that way anyway!!!
its probably why your bike doesnt run, you forgot to turn on the gas again!!!
36mm OD, 23mm ID
|
|
|
|
|
|
|
|
|
|
ltd edition PURPLE adjustable shocks - 280mm
|
|
HERE NOW!!
|
|
|
shocks with that good purple color you have always wanted!! there are lots of good purple products in treats. take a look. if. you want.
|
|
|
|
|
|
|
|
|
|
ltd edition SEAFOAM adjustable shocks - 320mm
|
|
HERE NOW!!
|
|
|
some say teal, some say neon blue (i guess?), i like seafoam! or allie mcteal. a new treatland shock of choice if you see foam in your future.
|
|
|
|
|
|
|
|
|
|
NOS OEM SQUARE bing type 85 carb atomizer - 2.17
|
|
HERE NOW!!
|
|
|
original SQUARE bing atomizer for the type 85 carburetor found on sachs!
2.17
|
|
|
|
|
|
|
|
|
|
OEM SQUARE bing type 85 carb atomizer - 2.15c
|
|
HERE NOW!!
|
|
|
original SQUARE bing atomizer for the type 85 carburetor found on sachs!
2.15c
|
|
|
|
|
|
|
|
|
|
ltd edition PERSIMMON orange adjustable shocks - 310mm
|
|
HERE NOW!!
|
|
|
mmmm persimmon orange shocks very LIMITED edition for the upcoming year of 2019!
|
|
|
|
|
|
|
|
|
|
progressive spring rate adjustable shocks with EGOBOOST™ technology- 270mm - 290mm in BLACK
|
|
HERE NOW!!
|
|
|
these 270mm to 290mm shocks are packed with so many features you'll surely tldr the description.
perfecto for tomos sprint/ST, many italian bikes that love those short shocks and more more more more more!
|
|
|
|
|
|
|
|
|
|
dual spring rate progressive adjustable shocks with EGOBOOST™ technology- 320mm - 340mm in BLACK
|
$209.99 alternate reality price $184.99
HERE NOW!!
|
|
|
these 320mm to 340mm shocks are packed with so many features you'll surely tldr the description.
perfecto for slightly lowered magnums, freespirits, kinda mini magnums, peugeot TSM and more more more more more!
|
|
|
|
|
|
|
|
|
|
black n white TUXEDO adjustable shocks - 280mm
|
|
*sorry none today*
|
|
|
these shocks are 280mm and will work perfectly on tomos + tons of other bikes!! use em on a puch maxi to lower things down a hair!
|
|
|
|
|
|
|
|
|
|
NOS sachs rear brake "SAFETY FIRST" sticker
|
|
HERE NOW!!
|
|
|
new old stock sachs "safety first" sticker. pretty cool.
|
|
|
|
|
|
|
|
|
|
IMCA black and chrome stock style SHEATHED shoxx - 310mm
|
|
HERE NOW!!
|
|
|
super classy, stock like sheathed black and chrome shocks by IMCA!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
IMCA black and chrome stock style SHEATHED shoxx - 320mm
|
|
HERE NOW!!
|
|
|
super classy, stock like sheathed black and chrome shocks by IMCA!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
IMCA black and chrome stock style SHEATHED shoxx - 290mm
|
|
*sorry none today*
|
|
|
super classy, stock like sheathed black and chrome shocks by IMCA!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
IMCA chrome n GREY stock style SHEATHED shoxx - 310mm
|
|
HERE NOW!!
|
|
|
super classy, stock like sheathed grey and chrome shocks by IMCA!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
black n RED adjustable shocks - 300mm
|
|
HERE NOW!!
|
|
|
these shocks are 300mm and will work perfectly on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc.
|
|
|
|
|
|
|
|
|
|
black n YELLOW adjustable shocks - 300mm
|
|
HERE NOW!!
|
|
|
these shocks are 300mm and will work perfectly on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc.
|
|
|
|
|
|
|
|
|
|
progressive spring rate adjustable shocks with EGOBOOST™ technology- 280mm - 300mm in CHROME
|
$199.99 alternate reality price $179.99
HERE NOW!!
|
|
|
these 280mm to 300mm shocks are packed with so many features you'll surely tldr the description.
perfecto for maxi swinger pinto cobra tomos and more more more more more!
|
|
|
|
|
|
|
|
|
|
SACHS super special STARTER / DECOMP cable outer - small
|
|
HERE NOW!!
|
|
|
oem sachs starter cable outer replacement
|
|
|
|
|
|
|
|
|
|
IMCA black and chrome stock style SHEATHED shoxx - 370mm
|
|
*sorry none today*
|
|
|
super classy, stock like sheathed black and chrome shocks by IMCA!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
stock like black and chrome stock style shocks - 320mm
|
|
*sorry none today*
|
|
|
these shocks are 320mm and will work perfectly on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc. They will also work on a slew of other bikes. super classy too!
|
|
|
|
|
|
|
|
|
|
sachs SPARTA tank stickers
|
|
HERE NOW!!
|
|
|
beautiful sachs SPARTA tank stickers in shiny chrome and matte black!! very slick
each one is approximately 245mm x 25mm
|
|
|
|
|
|
|
|
|
|
sachs SPARTA tank stickers - LUCKY
|
|
HERE NOW!!
|
|
|
beautiful sachs SPARTA lucky tank stickers in shiny chrome and matte black!! very slick
each one is approximately 245mm x 25mm
|
|
|
|
|
|
|
|
|
|
NOS sachs dirt bike sticker
|
|
HERE NOW!!
|
|
|
new old stock sachs dirt bike sticker. pretty cool. still sticky too.
put one on me toolbox. ive seen some other cool dirt bike stickers but
this one is pretty good. i like the colors.
73mm x 78mm
|
|
|
|
|
|
|
|
|
|
all chrome SHEATHED shocks - 370mm
|
|
*sorry none today*
|
|
|
super classy, stock like sheathed ALL chrome shocks!
370mm long!
|
|
|
|
|
|
|
|
|
|
NOS vespa grande center cover sticker - RED
|
|
HERE NOW!!
|
|
|
new old stock original center cover decal for vespa grande!
red with silver lettering
|
|
|
|
|
|
|
|
|
|
NOS vespa grande center cover sticker - BLUE
|
|
HERE NOW!!
|
|
|
new old stock original center cover decal for vespa grande!
blue with red lettering
|
|
|
|
|
|
|
|
|
|
NOS sachs PRIMA sticker - small
|
|
HERE NOW!!
|
|
|
new old stock sachs "PRIMA" sticker. pretty cool. ive seen some other cool stickers, but this one is pretty good
about 100mm x 19mm
|
|
|
|
|
|
|
|
|
|
NOS sachs SUBURBAN sticker - small
|
|
HERE NOW!!
|
|
|
new old stock sachs "SUBURBAN" sticker. pretty cool. ive seen some other cool stickers, but this one is pretty good
about 100mm x 19mm
|
|
|
|
|
|
|
|
|
|
NOS sachs bing type 85 idle screw
|
|
HERE NOW!!
|
|
|
new old stock original replacement idle screw for the sachs typ 85 "square" bing carburetor!
sachs part # 0962 065 000
|
|
|
|
|
|
|
|
|
|
NOS sachs bing type 85 carburetor slide top washer
|
|
HERE NOW!!
|
|
|
new old stock original replacement slide top washer for the sachs typ 85 "square" bing carburetor!
sachs part # 0244 109 000
|
|
|
|
|
|
|
|
|
|
NOS sachs bing type 85 primer button
|
|
HERE NOW!!
|
|
|
new old stock original replacement primer button aka "tickler" for the sachs typ 85 "square" bing carburetor!
comes with the button, spring and the tiniest split pin ever known to man.
sachs part # 0281 109 000
|
|
|
|
|
|
|
|
|
|
IMCA black and chrome stock style SHEATHED shoxx - 330mm
|
|
HERE NOW!!
|
|
|
new old stock super classy, stock like sheathed black and chrome shocks by IMCA!!
made in ITALY!
|
|
|
|
|
|
|
|
|
|
puch bosch + derbi motoplat flywheel puller
|
|
HERE NOW!!
|
|
|
flywheel puller for bosch flywheels - puch, kreidler, zundapp & tomos a3, tomos a35 (w/ iskra cdi), solo, batavus/trac using M56 engines and derbi mopeds using motoplat ignition
26mm x 1.5mm on one side and 22mm x 1.5mm on the other
|
|
|
|
|
|
|
|
|
|
OEM square bing SACHS top gasket
|
|
HERE NOW!!
|
|
|
OEM top gasket for the square bing! that highlight in bing carburetor evolution you all know and love. this is the carb commonly found on the sachs 504 and 505!!
|
|
|
|
|
|
|
|
|
|
sachs bing PAPER float bowl gasket
|
|
HERE NOW!!
|
|
|
NEW paper gasket material for enhanced durability! no swelling! no disintegration!
|
|
|
|
|
|
|
|
|
|
sachs square bing carburetor gasket SET
|
|
|
seal up that leaky bing and stop getting yelled at by your landlord with these nice n tasty gaskets.
|
|
|
|
|
|
|
|
|
|
100% authentic float bowl GASKET for sachs type 85
|
|
HERE NOW!!
|
|
|
replacement float bowl gasket for the bing type 85 carburetor aka square bing found on many sachs mopeds!!
OEM gummi gasket
|
|
|
|
|
|
|
|
|
|
DELUXE bing float bowl GASKET for sachs type 85
|
|
HERE NOW!!
|
|
|
replacement float bowl gasket for the bing type 85 carburetor aka square bing found on many sachs mopeds!!
this DELUXE version is resistant to ethanol and other fun stuff that causes gaskets to swell.
|
|
|
|
|
|
|
|
|
|
NOS sachs bing carburetor TOP with bolts
|
$9.99 alternate reality price $7.99
HERE NOW!!
|
|
|
replace the carburetor top cap on your sachs bing! comes with bolts
|
|
|
|
|
|
|
|
|
|
NOS sachs bing carburetor float BOWL
|
|
HERE NOW!!
|
|
|
new old stock original replacement float bowl for your sachs "square" bing!!
|
|
|
|
|
|
|
|
|
|
sachs hercules old timer headlight LENS and reflector assembly
|
|
*sorry none today*
|
|
|
replacement chrome headlight bezel and lens/reflector assembly for sachs
hercules MK, KX50, prima, K50/ultra. This may fit some older puch
models as well!!! This will NOT fit puch maxi, magnum, etc.
for 150mm buckets
160mm overall diameter (including bezel)
125mm lens diameter
|
|
|
|
|
|
|
|
|
|
sachs bing carburetor FLOAT
|
|
HERE NOW!!
|
|
|
replacement float for your sachs "square" bing!!
|
|
|
|
|
|
|
|
|
|
puch batavus sachs 505 moped POINTS
|
|
HERE NOW!!
|
|
|
these points have a screw to make the connection and don't have the wire.
|
|
|
|
|
|
|
|
|
|
puch & sachs points piece of felt
|
|
HERE NOW!!
|
|
|
this is the little piece of felt that goes on the points stator plate for puch and sachs and maybe more?
|
|
|
|
|
|
|
|
|
|
NOS Sachs & Puch BOSCH superior quality moped points - NO WIRE - in the box
|
|
HERE NOW!!
|
|
|
new old stock genuine real original BOSCH points with NO wire. these come in the original sachs plastic container!! wow!!
puch part # 302.3.50.015.0
bosch part # 1 217 013 021
|
|
|
|
|
|
|
|
|
|
SACHS NOS flywheel magneto woodruff key 2 x 3.7 x 9.5
|
|
HERE NOW!!
|
|
|
2mm wide x 3.7mm tall x 9.5mm long also for most small bosch flywheel and more... benelli, batavus, kriedler, etc
|
|
|
|
|
|
|
|
|
|
replacement piston ring - 45mm x 1.5mm - GI
|
|
HERE NOW!!
|
|
|
puch 70cc treat kit + reed kit especiale replacement piston ring. you broke yours? that's ok, we got some here for you. this ring also works on sachs athena 70cc kit
+ puch 45mm airsal, yep also the honda MB5 airsal. and the tomos A35 parmakit. also the motobecane airsal 45mm AV7 and AV88 kits, yes! and now the tomos A35 45mm alukit
45mm x 1.5mm - GI
|
|
|
|
|
|
|
|
|
|
OEM genuine SACHS SQUARE bing jets ... also for puch square bing carburetors
|
|
|
HERE NOW! check first for available sizes!
oem, original bing jets for square bing carburetors only!
sachs, puch korado and puch austro daimler dudes rejoice!
we have these sizes for you - 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 88 and 96!
|
|
|
|
|
|
|
|
|
|
OMG knob petcock - 12mm thread
|
|
HERE NOW!!
|
|
|
this is an OMG petcock made for the piaggio 220 APE MP P 601 and P601Z. it's a knob style cock for use with hi flow 1/4 or 6mm fuel line! wow! put this on any moped that uses 12mm petcocks
for 6mm fuel line
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
|
|
puch / zundapp / sachs - 2 speed shifter
|
|
*sorry none today*
|
|
|
2 speed shifter for puch, zundapp and sachs mopeds and motorbikes.
|
|
|
|
|
|
|
|
|
|
puch / zundapp / sachs - 3 speed shifter
|
|
HERE NOW!!
|
|
|
3 speed shifter for puch, zundapp and sachs mopeds and motorbikes.
|
|
|
|
|
|
|
|
|
|
domino commando 3 speed shifter with metal lever
|
|
HERE NOW!!
|
|
|
3 speed domino commando shifter with metal lever for all those 3 speed sachs, zundapps, puchs n such out there, verrry nice quality
|
|
|
|
|
|
|
|
|
|
replacement piston ring - 45mm x 1.5mm - GI - chromed
|
|
HERE NOW!!
|
|
|
puch 70cc treat kit + reed kit especiale replacement piston ring. you broke yours? that's ok, we got some here for you. this ring also works on sachs athena 70cc kit
+ puch 45mm airsal, yep also the honda MB5 airsal. and the tomos A35 parmakit. also the motobecane airsal 45mm AV7 and AV88 kits, yes! and now the tomos A35 45mm alukit
45mm x 1.5mm - GI - chromed
|
|
|
|
|
|
|
|
|
|
magura style grip SHIFTER - 3 speed
|
|
HERE NOW!!
|
|
|
magura style 3 speed shifter for puch, zundapp and sachs mopeds and
motorbikes. this is a universal 3 speed shifter you can use on any bike
you want!
|
|
|
|
|
|
|
|
|
|
MLM sachs VM18 clamp style intake + PHBG
|
|
HERE NOW!!
|
|
|
motion left mopeds 18mm clamp style intake for sachs
|
|
|
|
|
|
|
|
|
|
lusito 2 speed shifter - black with chrome lever
|
|
HERE NOW!!
|
|
|
lusito 2 speed shifter for puch, zundapp and sachs mopeds and motorbikes.
|
|
|
|
|
|
|
|
|
|
xtreme BLACK adjustable 10mm shocks - 300mm - v1
|
|
*sorry none today*
|
|
|
usable on most mopeds with approx 300mm shocks
version 1
|
|
|
|
|
|
|
|
|
|
xtreme BLACK adjustable 10mm shocks - 300mm - v2
|
|
*sorry none today*
|
|
|
usable on most mopeds with approx 300mm shocks
version 2
|
|
|
|
|
|
|
|
|
|
universal EBR extremely beefed up HYDRAULIC forks - 30mm tubes
|
|
*sorry none today*
|
|
|
the newest addition to the treats collection. stronger, smoother, dampinger, rigider, everythinger
fully hydraulic valving, the finest disk accommodations and 30mm diameter fork tubes.
|
|
|
|
|
|
|
|
|
|
MOPED THREADS sachs logo patch - black n white
|
|
*sorry none today*
|
|
|
very appropriately sized 64mm x 52mm sachs logo patch
rep sachs cause you know we all got one that JUST WON'T die. they run forever
|
|
|
|
|
|
|
|
|
|
MLM sachs flat port 15mm SHA intake
|
|
HERE NOW!!
|
|
|
motion left mopeds 15mm clamp style intake for sachs flat intake port cylinders!!
|
|
|
|
|
|
|
|
|
|
tomos A3, A35 and A55 complete OEM cdi plus many friends!
|
|
|
HERE NOW! complete par t pak to upgrade yer old points ignition! direct fit on a3 a35 and a55 plus can be used on puch, some batavus and sachs, etc!!
80w of lighting power! wow!
|
|
|
|
|
|
|
|
|
|
MLM sachs VM20 FLAT port intake
|
|
HERE NOW!!
|
|
|
motion left mopeds 20mm flange style intake for sachs
flat port version!!
|
|
|
|
|
|
|
|
|
|
MLM sachs ANGLED port 15mm SHA intake - SIDE facing
|
|
HERE NOW!!
|
|
|
side facing intake for sha carburetors on a sachs with an angled port cylinder!!! good if you want the carb out to the side where you can see it? or if its in the way of all your frame stuff!!
|
|
|
|
|
|
|
|
|
|
MLM sachs ANGLED port 15mm SHA intake - REAR facing
|
|
HERE NOW!!
|
|
|
rear facing intake for sha carburetors on a sachs with an angled port cylinder!!! based off a sachs seville, so make sure you have the same carb mounting spot or else it wont fit!
|
|
|
|
|
|
|
|
|
|
tomos A3, A35 and A55 complete OEM cdi plus many friends V2!! - with parmakit box
|
|
|
HERE NOW! complete par t pak to upgrade yer old points ignition! direct fit on a3 a35 and a55 plus can be used on puch, some batavus and sachs, etc!!
80w of lighting power! wow!
|
|
|
|
|
|
|
|
|
|
SACHS style CEV 9400 tail light with bracket - GREY
|
$67.99 alternate reality price $59.99
HERE NOW!!
|
|
|
original OEM CEV 9400 taillight originally found on late model sachs and vespa piaggio ciao and bravo!! for use on anything ya want...has the very handy integrated license plate holder as well.
in classy grey plastic
|
|
|
|
|
|
|
|
|
|
magura style grip SHIFTER - 2 speed - grey
|
|
HERE NOW!!
|
|
|
magura style 2 speed shifter for puch, zundapp and sachs mopeds and
motorbikes. this is a universal 2 speed shifter you can use on any bike
you want.
|
|
|
|
|
|
|
|
|
|
magura style grip SHIFTER - 2 speed - black
|
|
*sorry none today*
|
|
|
magura style 2 speed shifter for puch, zundapp and sachs mopeds and
motorbikes. this is a universal 2 speed shifter you can use on any bike
you want.
|
|
|
|
|
|
|
|
|
|
NOS original LAZER tail light lens
|
|
HERE NOW!!
|
|
|
NOS original replacement tail light lens for LAZER MOPEDS
|
|
|
|
|
|
|
|
|
|
NOS original step through GENERAL tail light lens
|
|
HERE NOW!!
|
|
|
NOS original replacement tail light lens for step through general MOPEDS
|
|
|
|
|
|
|
|
|
|
NOS Sachs crankshaft holder bearing tool
|
|
HERE NOW!!
|
|
|
NOS Sachs crankshaft holder bearing tool in original packaging. like the original puch version, this tool helps stabilize and support the crank lobes while installing your new crank bearings on your sachs moped and possibly others that have the same size spacing in the crank lobe.
6mm thickness
|
|
|
|
|
|
|
|
|
|
USED original LAZER tail light lens
|
|
*sorry none today*
|
|
|
USED original tail light for LAZER MOPEDS
|
|
|
|
|
|
|
|
|
|
MOPED THREADS foxi gt logo patch - BLUE
|
|
HERE NOW!!
|
|
|
MOPED THREADS presents a beautiful foxi gt logo patch in blue!
|
|
|
|
|
|
|
|
|
|
MOPED THREADS foxi gt logo patch - ORANGE
|
|
HERE NOW!!
|
|
|
MOPED THREADS presents a beautiful foxi gt logo patch in orange!
|
|
|
|
|
|
|
|
|
|
MOPED THREADS foxi gt logo patch - GREEN
|
|
HERE NOW!!
|
|
|
MOPED THREADS presents a beautiful foxi gt logo patch in green!
|
|
|
|
|
|
|
|
|
|
NOS sachs 6202 TNH.c3 FAG crankshaft bearing
|
|
HERE NOW!!
|
|
|
new old stock original SACHS 6202 TNH.c3 polymide cage crankshaft bearing made by FAG
made in germany!
sachs part # 0232 120 003
|
|
|
|
|
|
|
|
|
|
NOS sachs tool - 0276 082 000
|
|
HERE NOW!!
|
|
|
new old stock original sachs factory tool! this is a part of some sorta
assembly jig thing?? apparently this is for sachs snowmobile engines
lol.
sachs part # 0276 082 000
|
|
|
|
|
|
|
|
|
|
NOS sachs plate - 0244 190 000
|
|
HERE NOW!!
|
|
|
new old stock original sachs mystery plate/disk thing! apparently this is for sachs snowmobile engines lol.
sachs part # 0244 190 000
|
|
|
|
|
|
|
|
|
|
NOS mystery bearing installer tool - 12mm
|
|
HERE NOW!!
|
|
|
new old stock mystery bearing installer tool!
12mm OD pin at the end
28mm OD flat spot aka the bearing driver surface
|
|
|
|
|
|
|
|
|
|
USED MOTOPLAT points flywheel - 9600089
|
|
HERE NOW!!
|
|
|
USED motoplat points flywheel for sachs 504!
motoplat part # 9600089
|
|
|
|
|
|
|
|
|
|
NOS original VDO 40mph speedometer - BLACK rim
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
new old stock original VDO 40 mph speedometer for puch, sachs, and batuvus!
BLACK rim around the top!
60mm OD
|
|
|
|
|
|
|
|
|
|
USED MOTOPLAT points flywheel - 9600099
|
|
HERE NOW!!
|
|
|
USED motoplat points flywheel for derbi piston port and pyramid reed!
motoplat part # 9600099
|
|
|
|
|
|
|
|
|
|
USED MOTOPLAT points flywheel - 0602062
|
|
*sorry none today*
|
|
|
USED motoplat points flywheel for derbi flat reed!
motoplat part # 0602062
|
|
|
|
|
|
|
|
|
|
USED sachs 17" spoke wheel - FRONT
|
$69.99 alternate reality price $49.99
HERE NOW!!
|
|
|
USED sachs 17" FRONT spoke wheel!
17 x 1.30" rim size
|
|
|
|
|
|
|
|
|
|
magura style grip SHIFTER - 2 speed - black
|
|
*sorry none today*
|
|
|
magura style 2 speed shifter for puch, zundapp and sachs mopeds and
motorbikes. this is a universal 2 speed shifter you can use on any bike
you want.
|
|
|
|
|
|
|
|
|
|
NOS sachs PRIMA luggage carrier - orange
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs PRIMA luggage carrier aka book rack!!! perfectooo for a primo restoration!
sachs part # 760 000 997
|
|
|
|
|
|
|
|
|
|
NOS sachs SUBURBAN luggage carrier - red
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs SUBURBAN luggage carrier aka book rack!!! perfectooo for a primo restoration!
sachs part # 760 000 996
|
|
|
|
|
|
|
|
|
|
NOS sachs SUBURBAN luggage carrier - blue
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs SUBURBAN luggage carrier aka book rack!!! perfectooo for a primo restoration!
sachs part # 760 000 995
|
|
|
|
|
|
|
|
|
|
NOS sachs SEVILLE luggage carrier - black
|
$59.99 alternate reality price $49.99
HERE NOW!!
|
|
|
new old stock original sachs SEVILLE luggage carrier aka book rack!!! this rack came on seville models with the single seat and oil
injection!! some sevilles came with a long seat and chrome tubular
luggage carrier!
sachs part # 760 000 896
|
|
|
|
|
|
|
|
|
|
NOS 16" grimeca rear CIRCLE MAG - 34T
|
$250.00 alternate reality price $199.99
HERE NOW!!
|
|
|
the raddest mag in the land...lambo style circle mag for masters...
rear only!
|
|
|
|
|
|
|
|
|
|
NOS 16" grimeca rear CIRCLE MAG - 36T
|
$250.00 alternate reality price $199.99
HERE NOW!!
|
|
|
the raddest mag in the land...lambo style circle mag for masters...
rear only!
|
|
|
|
|
|
|
|
|
|
nos sachs SPARTA left tank cover
|
|
HERE NOW!!
|
|
|
nos sachs sparta tank cover for the left side.
|
|
|
|
|
|
|
|
|
|
USED sachs G3 fork ears with reflectors
|
|
HERE NOW!!
|
|
|
pair of fork ears aka headlight brackets for sachs g3 forks!!
complete with the big round funny reflectors
|
|
|
|
|
|
|
|
|
|
sachs hercules PRIMA plastic center cover
|
|
HERE NOW!!
|
|
|
new sachs hercules prima center cover / floorboard thing!!
|
|
|
|
|
|
|
|
|
|
sachs hercules PRIMA plastic side cover SET
|
|
*sorry none today*
|
|
|
new sachs hercules prima plastic side covers !!
in gloss black finish!!
|
|
|
|
|
|
|
|
|
|
sachs hercules PRIMA black center stand SET
|
|
*sorry none today*
|
|
|
new sachs hercules prima center stand set!!
in gloss black finish!!
complete with mounting hardware and return spring! wow!
|
|
|
|
|
|
|
|
|
|
USED sachs sparta foxi chrome tank cover SET - set AAA
|
|
HERE NOW!!
|
|
|
USED sachs sparta tank cover for the left and right sides.
has some scratches and rust !
|
|
|
|
|
|
|
|
|
|
USED 16" grimeca rear CIRCLE MAG - 50T
|
$199.99 alternate reality price $159.99
HERE NOW!!
|
|
|
the raddest mag in the land...lambo style circle mag for masters...
rear only!
|
|
|
|
|
|
|
|
|
|
NOS 16" grimeca rear CIRCLE MAG - no sprocket
|
$199.99 alternate reality price $179.99
HERE NOW!!
|
|
|
the raddest mag in the land...lambo style circle mag for masters...
16" x 1.60" rim size
|
|
|
|
|
|
|
|
|
|
NOS 16" grimeca rear CIRCLE MAG - kinda nude
|
$179.99 alternate reality price $129.99
HERE NOW!!
|
|
|
the raddest mag in the land...lambo style circle mag for masters...
16" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
SACHS chrome valve stem caps - black n white logo
|
|
HERE NOW!!
|
|
|
SACHS valve stem caps! even if you don't have a SACHS you can still represent on any bike! gizmo, solo, it don't matter bro!
|
|
|
|
|
|
|
|
|
|
pietcard CDI ignition box - 2013
|
|
HERE NOW!!
|
|
|
pietcard CDI ignition box - 2013. this is the CDI box that comes with pietcard CDI units 01 - 07 + 013 and 016
|
|
|
|
|
|
|
|
|
|
pietcard CDI internal coil - 06 - black - bosch ducati - clockwise
|
|
HERE NOW!!
|
|
|
pietcard CDI . these are interesting CDI's. you put the coil on your stock points stater plate and use your stock points flywheel! this as an electronic converter made to replace the points and condenser.
use this for all mopeds equipped with clockwise small bosch or ducati points ignitions and flywheel - found on some minarelli, sachs 505 and some derbi mopeds and others
|
|
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - sparta SPOKE
|
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for sparta mopeds WITH SPOKE WHEELS including:
- sparta foxi GT, sport
- sparta buddy, deluxe, stingray
- sparta flying dutchman klm40
|
|
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - sachs version 1
|
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for CERTAIN sachs mopeds including:
- 1975 thru 1979 westlake spoke and snowflake wheels
- 1980 thru 1984 sundancer with spoke wheels
- 1978 thru 1979 balboa spoke and snowflake wheels
- 1980 thru 1984 suburban with snowflakes
- 1980 thru 1984 seville with snowflakes
- 1980 thru 1984 prima with snowflakes
|
|
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - General 5-Star and 5-Star ST
|
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for honda mopeds including:
- 1978-1983 General 5-Star (model with small hubs)
- 1978-1983 General 5-Star ST (model with small hubs)
**does NOT come with brake springs. you have to use your originals!**
|
|
|
|
|
|
|
|
|
|
NOS sachs FAB fork lock
|
|
HERE NOW!!
|
|
|
NOS original mistah FAB lock set with two keys for sachs mopeds!
sachs part # 0877 248 100
|
|
|
|
|
|
|
|
|
|
sachs hercules keyed ignition SWITCH
|
|
HERE NOW!!
|
|
|
new ignition switch with key for certain sachs/hercules mopeds!
2 position (on/off)
|
|
|
|
|
|
|
|
|
|
sachs hercules ignition switch KEY
|
|
HERE NOW!!
|
|
|
new ignition switch KEY for certain sachs/hercules mopeds!
|
|
|
|
|
|
|
|
|
|
vespa, sachs & solex crankshaft bearing + minarelli counter shaft bearing 6202
|
|
HERE NOW!!
|
|
|
vespa piaggio, sachs and solex moped crankshaft bearing + minarelli V1 counter shaft bearing - 6202 C3
1 of the 2 nu50 transmission bearings too!
|
|
|
|
|
|
|
|
|
|
sachs 505 bearings and seals POSI PACK
|
|
|
ADD TO CART TO CHECK STOCK!
make your sachs happy with this chill bearing and seals bottom end rebuild set...
stop harshing your 505's vibes brah its just not kosher
|
|
|
|
|
|
|
|
|
|
sachs 505 weird ART SCULPTURE engine rebuild supplies
|
|
|
ADD TO CART TO CHECK STOCK!
on display today in the treatland museum of modern art is a sculpture composed of bearings, seals, and gaskets to rebuild your sachs 505...
a refined party pack for the developed pallette!
|
|
|
|
|
|
|
|
|
|
sachs 505 engine rebuild MEGA BUNDLE gift basket
|
|
|
ADD TO CART TO CHECK STOCK!
this is the big one!!!! its like, when you go buy fireworks at those little stands, and then theres the huge mega blaster pack that comes with everything and you never get it, well now is your chance!!!!!!
except its all the bearings, seals, gaskets, and a crank for a sachs 505 bottom end rebuild.....eh, same thing!!!
|
|
|
|
|
|
|
|
|
|
new old stock SOLO engine
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
the water sits in the cylinder
perfect stocking stuffer
|
|
|
|
|
|
|
|
|
|
NOS solo chrome flywheel COVER
|
|
HERE NOW!!
|
|
|
NOS original chrome flywheel cover for your solo engine!! keep that
bosch ignition safe behind this bad boy! or just use it as a coin tray
like me!
|
|
|
|
|
|
|
|
|
|
new old stock SOLO exhaust
|
|
HERE NOW!!
|
|
|
new old stock original SOLO exhaust!! definitely the most technologically advanced exhaust system of any moped ever made.
it's pretty dusty n dirty, but it's new!
|
|
|
|
|
|
|
|
|
|
sachs 504 bearings and seals LOUD PACK
|
|
|
ADD TO CART TO CHECK STOCK!
make your sachs happy with this chill bearing and seals bottom end rebuild set...
stop harshing your 504's vibes brah its just not kosher
|
|
|
|
|
|
|
|
|
|
sachs 504 crankshaft + bearings and seals SCAT PACK
|
|
|
ADD TO CART TO CHECK STOCK!
sachs 504 race crank, crank bearings, left and right crank seals and output shaft seal!
what's not to love?
|
|
|
|
|
|
|
|
|
|
USED stock SOLO exhaust
|
$69.99 alternate reality price $34.99
HERE NOW!!
|
|
|
USED original SOLO exhaust!! definitely the most technologically advanced exhaust system of any moped ever made.
it's like the one in the photo, but with more dirt n oil on it because it's used!
|
|
|
|
|
|
|
|
|
|
NOS solo plastic drive PULLEY - 11t
|
|
HERE NOW!!
|
|
|
NOS original plastic drive PULLEY for your solo!! this is for the single speed models!
11t drive sprocket!!
solo part # 34-00-142
|
|
|
|
|
|
|
|
|
|
USED solo plastic drive PULLEY - 11t
|
$49.99 alternate reality price $29.99
HERE NOW!!
|
|
|
USED original plastic drive PULLEY for your solo!! this is for the single speed models!
11t drive sprocket!!
solo part # 34-00-142
|
|
|
|
|
|
|
|
|
|
universal 30-32mm exhaust clamp for sachs and more
|
|
*sorry none today*
|
|
|
exhaust clamp for clamp style exhaust pipes with 30-32mm OD on the header
works with the sachs malossi header, sachs MLM pipes, and maybe some larger ciao pipes with that size header?!
|
|
|
|
|
|
|
|
|
|
HPI CDI mini rotor ignition system for Sachs 504
|
|
|
HERE NOW! ladies and gentlemen, we are pleased to present the mini rotor ignition system for sachs 504!!!!!!!!!!!!!!!!!
|
|
|
|
|
|
|
|
|
|
sachs airsal kit replacement piston ring - 43.5mm x 1mm - CHROMED
|
|
HERE NOW!!
|
|
|
replacement 43.5mm x 1mm CHROMED piston ring for the airsal sachs kit!
|
|
|
|
|
|
|
|
|
|
front sprocket for sachs
|
|
|
HERE NOW!
super heavy duty front sprocket for sachs!
we carry 10T, 11T, 12T, 13T, 14T, 15T, 16T and 18T
|
|
|
|
|
|
|
|
|
|
minarelli + sachs + tomos + garelli style axle chain adjuster - left side
|
|
HERE NOW!!
|
|
|
rear axle / wheel adjuster / drive chain tensioner. minarelli / sachs / tomos / garelli style - left side
also tomos oem # 209212
|
|
|
|
|
|
|
|
|
|
minarelli + sachs + tomos + garelli style axle chain adjuster - right side
|
|
HERE NOW!!
|
|
|
rear axle / wheel adjuster / drive chain tensioner. minarelli / sachs / tomos / garelli style - right side
also tomos part # 231297
|
|
|
|
|
|
|
|
|
|
effe points for BOSCH - version 1
|
|
HERE NOW!!
|
|
|
found on some morini, garelli, batavus M56, sachs and minarelli mopeds plus many more! check within for more info
This is what you want for sachs 80mm stators like on 504!
made in italy
|
|
|
|
|
|
|
|
|
|
effe points for BOSCH - version 3 (puch)
|
|
HERE NOW!!
|
|
|
found on puch as well as some sachs and batavus! check within for more info
made in italy
|
|
|
|
|
|
|
|
|
|
effe points for BOSCH - version 2
|
|
HERE NOW!!
|
|
|
found on some sachs, hercules, kreidler, solo and zundapp, check within for more info
made in italy
|
|
|
|
|
|
|
|
|
|
effe points for BOSCH - version 4
|
|
HERE NOW!!
|
|
|
found on some models of sachs, hercules, kreidler, solo, tomos and zundapp, check within for more info
made in italy
|
|
|
|
|
|
|
|
|
|
derbi moped selettra CDI internal rotor ignition system
|
|
*sorry none today*
|
|
|
did you know we have this? maybe not. racers, riders, rippers. this is the top of the line CDI!
derbi derbi derbi
|
|
|
|
|
|
|
|
|
|
tomos puch morini sachs RED clutch spring - 30lbs
|
|
HERE NOW!!
|
|
|
stiffer clutch springs for all tomos, stock za50 clutches, puch MK clutch, morini m101 rear variator, sachs saxonette and perhaps others! this version is stiffer than the blue version.
|
|
|
|
|
|
|
|
|
|
tomos puch morini sachs BLUE clutch spring - 20lbs
|
|
HERE NOW!!
|
|
|
stiffer clutch springs for all tomos, stock za50 clutches, puch MK clutch, morini m101 rear variator, sachs saxonette and perhaps others! this version is not as stiff as the red version.
|
|
|
|
|
|
|
|
|
|
tomos puch morini sachs YELLOW clutch spring - 25lbs
|
|
HERE NOW!!
|
|
|
stiffer clutch springs for all tomos, stock za50 clutches, puch MK clutch, morini m101 rear variator, sachs saxonette and perhaps others! this version is stiffer than the blue version.
|
|
|
|
|
|
|
|
|
|
tomos OEM axle adjuster - RIGHT
|
|
HERE NOW!!
|
|
|
this is an original axle adjuster from tomos....right side!
tomos part number 209212
|
|
|
|
|
|
|
|
|
|
A-PLUS quality SACHS front sprocket
|
|
|
ADD TO CART TO CHECK STOCK!
a-plus quality, meaning A+ not A- or B+, not even close to C. some of the best we got!
your sachs can now go faster, or slower! your choice!!
nice smooth rounded edges and finish, ready for the abuse of your rippin brapper
|
|
|
|
|
|
|
|
|
|
A-PLUS quality 42.5mm offset sprocket for an unknown sachs
|
|
|
ADD TO CART TO CHECK STOCK!
a-plus quality, meaning A+ not A- or B+, not even close to C. some of the best we got!
this is for some type of sachs rear wheel, not exactly sure! measure your wheel and you could have a match!
a very specific size and bolt pattern, not for most bikes. 42.5mm ID, 66mm bolt holes across, 47mm bolt holes side to side
|
|
|
|
|
|
|
|
|
|
A-PLUS quality 42.5mm sprocket for sachs n some minarelli morini and garelli
|
|
|
ADD TO CART TO CHECK STOCK!
a-plus quality, meaning A+ not A- or B+, not even close to C. some of the best we got!
works with columbia commuters, sachs prima, hercules and.....possibly for other bikes too? measurements inside...
morini, minarelli and garelli models with 35mm bearing cups use this size sprocket! MEASURE!!!
|
|
|
|
|
|
|
|
|
|
A-PLUS quality 94mm rear sprocket for some sachs n batavus maybe
|
|
|
ADD TO CART TO CHECK STOCK!
a-plus quality, meaning A+ not A- or B+, not even close to C. some of the best we got!
not sure exactly what bike its for, but supposedly some sachs and batavus?
94mm ID, flat sprocket...measurements inside!
|
|
|
|
|
|
|
|
|
|
A-PLUS quality grimeca 5-bolt rear sprocket
|
|
|
ADD TO CART TO CHECK STOCK!
a-plus quality, meaning A+ not A- or B+, not even close to C. some of the best we got!
38mm ID sprocket with five 7mm holes...diagram inside!
|
|
|
|
|
|
|
|
|
|
minarelli, sachs, tomos and garelli style axle chain adjusters handmade by PIKE
|
|
*sorry none today*
|
|
|
rear axle / wheel adjuster / drive chain tensioner. minarelli / sachs / tomos / garelli style - handmade by PIKE in Boston Massachusetts.
|
|
|
|
|
|
|
|
|
|
NOS bosch points - 2 207 013 005
|
|
HERE NOW!!
|
|
|
new old stock original bosch points for many bikes with 80mm stators such as sachs 504, morini m1, batavus / trac laura m56, some minarelli v1, etc.
made in germany!
|
|
|
|
|
|
|
|
|
|
bosch moped ignition coil for 80mm stators - 459
|
|
HERE NOW!!
|
|
|
NOS Bosch moped ignition coil for 80mm stators. Found on some Sachs and Kreidler models!!
|
|
|
|
|
|
|
|
|
|
derbi 15 x 30 x 7 seal for drive shaft on pyramid/piston port engines + sachs crank seal!
|
|
HERE NOW!!
|
|
|
drive shaft seal for derbi piston port and pyramid reed engines - 15 x 30 x 7
crankshaft seal on clutch side for sachs 504/505 + crankshaft seal both sides on M48 batavus + magneto side seal on solo engines!
|
|
|
|
|
|
|
|
|
|
viton seal - 15 x 30 x 5
|
|
HERE NOW!!
|
|
|
VITON crankshaft seal on clutch side for sachs 504/505 + crankshaft seal
both sides on M48 batavus + magneto side seal on solo engines!
15 x 30 x 5
|
|
|
|
|
|
|
|
|
|
USED General moped speedometer drive - thread on style
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
USED General moped speedometer drive!!
as you can see, this is the style that uses a thread on type cable!!
|
|
|
|
|
|
|
|
|
|
USED General moped speedometer drive - push in style
|
$49.99 alternate reality price $39.99
HERE NOW!!
|
|
|
Used original OEM speedometer drive for use on General mopeds. For 12mm axles. These spin free n' easy and are ready for use.
as you can see, this is the style that uses a push in type cable!!
|
|
|
|
|
|
|
|
|
|
sachs 505 TOP racing crankshaft - evolution series
|
|
HERE NOW!!
|
|
|
evolution series crankshaft for sachs 505 engines by TOP
44mm stroke
|
|
|
|
|
|
|
|
|
|
OEM sachs 505 clutch flyweight DONUT
|
|
HERE NOW!!
|
|
|
this is a flyweight for the Sachs 505 motors.. but you know what to call it !! that ring thing in my clutch!!
|
|
|
|
|
|
|
|
|
|
OEM sachs 505 clutch flyweight disk
|
|
HERE NOW!!
|
|
|
this is a flyweight disk for the Sachs 505 motors.. but you know what to call it !! that cover disk thingy in my clutch!!
|
|
|
|
|
|
|
|
|
|
stock SACHs air filter
|
|
HERE NOW!!
|
|
|
the stock air filter for your sachs moped with a square bing carburetor airbox!
sashhhhchchhhhhssssssss
|
|
|
|
|
|
|
|
|
|
MLM sachs people's sidebleed pipe
|
$225.00 alternate reality price $160.00
HERE NOW!!
|
|
|
super quality handmade people's pipe from motion left mopeds for sachs mopeds! Mounts on left side!
|
|
|
|
|
|
|
|
|
|
stock SACHs air BOX - long half
|
|
HERE NOW!!
|
|
|
black plastic air box half for stock sachs square bing carburetors
|
|
|
|
|
|
|
|
|
|
stock SACHs air BOX - short half - with choke assembly
|
|
HERE NOW!!
|
|
|
this is the side that bolts to the carb itself. includes all the lil bits ya need
|
|
|
|
|
|
|
|
|
|
MLM sachs davinci pipe
|
|
HERE NOW!!
|
|
|
super quality handmade davinci pipe from motion left mopeds for sachs! Mounts on left side!
|
|
|
|
|
|
|
|
|
|
sachs 12mm bing CLONE carburetor
|
|
HERE NOW!!
|
|
|
replacement clone carb for your sachs moped!! square version like most use...make sure its the one you need!
info inside...
|
|
|
|
|
|
|
|
|
|
sachs air box CLIP
|
|
HERE NOW!!
|
|
|
the infamous clip for joining the two halves of the sachs airbox!!
|
|
|
|
|
|
|
|
|
|
sachs 10mm bing CLONE carburetor
|
|
*sorry none today*
|
|
|
replacement clone carb for your sachs moped!! square version like most use...make sure its the one you need!
info inside...
|
|
|
|
|
|
|
|
|
|
complete stock SACHS square airbox
|
|
HERE NOW!!
|
|
|
complete stock square airbox for pretty much all the sachs in the US!!
comes with long airbox half, short half, air filter, airbox clip and all
the lil chokey bits.
|
|
|
|
|
|
|
|
|
|
HIGH FLOW sachs air filter - 27mm ID
|
|
HERE NOW!!
|
|
|
just like the stock air filter BUT with a larger opening for more flowwww. 27mm to be exact. for your sachs moped with a square bing carburetor airbox!
|
|
|
|
|
|
|
|
|
|
NOS OEM sachs 505 pedal shaft
|
|
HERE NOW!!
|
|
|
NOS OEM Sachs 505 pedal shaft for inside your 505 engine
should be OEM part # 0237 106 101
|
|
|
|
|
|
|
|
|
|
NOS sachs crankshaft
|
$200.00 alternate reality price $150.00
HERE NOW!!
|
|
|
original, new old stock sachs crankshaft!!! comes in the original hawt n sachsy box WITHOUT small end needle bearing
i believe this is a 504 crank. i am not a sachs master though.
|
|
|
|
|
|
|
|
|
|
NOS OEM stock SACHs choke assembly
|
|
HERE NOW!!
|
|
|
NOS OEM sachs choke assembly. this is the plastic peice that lives in
the stock sachs square bing air box. you use a lever to control it's
position...your choke...
oem sachs part number 0225.009.000
|
|
|
|
|
|
|
|
|
|
sachs airbox rubber coupler
|
|
*sorry none today*
|
|
|
stock sachs rubber coupler for what i assume is connecting the airbox to the carburetor.
88mm long
30mm/35mm openings
|
|
|
|
|
|
|
|
|
|
used oem stock SACHs air BOX - short half
|
|
*sorry none today*
|
|
|
this is the side that bolts to the carb itself. includes all the lil bits ya need
|
|
|
|
|
|
|
|
|
|
USED sachs 505 engine
|
$99.99 alternate reality price $49.99
HERE NOW!!
|
|
|
here's a sachs 505 bottom end!!
missing the clutch bits and piston (ignore the one in pic!) crankshaft turns over pretty nice!!
|
|
|
|
|
|
|
|
|
|
NOS OEM sachs 505 pedal shaft starter gear
|
|
HERE NOW!!
|
|
|
NOS OEM Sachs 505 pedal shaft starter gear for inside your 505 engine. Of course this will NOT work on 504. oem part number 0237.106.001
|
|
|
|
|
|
|
|
|
|
USED sachs 505 1/ engine
|
$99.99 alternate reality price $89.99
HERE NOW!!
|
|
|
a sachs engine for sachs lovers! this is a 505 1/ ??? idk!! the tag doesn't say!!
has ignition but needs a clutch cover. turns over smoothly. almost ready to go!
|
|
|
|
|
|
|
|
|
|
stock SACHS 504 505 airbox o-ring seal
|
|
HERE NOW!!
|
|
|
replacement o-ring / seal for the stock sachs 504 and 505 plastic airbox assemble!!
keep things air tight!
|
|
|
|
|
|
|
|
|
|
NOS OEM sachs 504/505 clutch flyweight disk
|
|
HERE NOW!!
|
|
|
this is a flyweight disk for the Sachs 505 motors.. but you know what to call it !! that cover disk thingy in my clutch!!
|
|
|
|
|
|
|
|
|
|
sachs 504 race crankshaft
|
|
*sorry none today*
|
|
|
finally!!! a race crank just for the sachs 504 engine!!! so amazing!!
will not work on 505 sachs engines!
|
|
|
|
|
|
|
|
|
|
NOS sachs Foxi/Sparta pedal chain tensioner - LONG
|
|
HERE NOW!!
|
|
|
NOS replacement Foxi/Sparta pedal chain tensioner!
long version = 140mm overall length
sachs/sparta part # 055008
|
|
|
|
|
|
|
|
|
|
NOS sachs Foxi/Sparta pedal chain tensioner - SHORT
|
|
HERE NOW!!
|
|
|
NOS replacement Foxi/Sparta pedal chain tensioner!
short version = 120mm overall length
sachs/sparta part # 055008
|
|
|
|
|
|
|
|
|
|
sachs athena 70cc replacement piston - 45mm
|
|
HERE NOW!!
|
|
|
replacement 45mm piston for sachs athena 70cc kits for 504 and 505 engines .. single ringed pleasure for you and him!
|
|
|
|
|
|
|
|
|
|
sachs athena 50cc replacement piston - 38mm
|
|
HERE NOW!!
|
|
|
replacement 38mm piston for sachs athena 50cc kits for 504 and 505 engines .. dual ringed!
|
|
|
|
|
|
|
|
|
|
sachs athena 80cc replacement piston - 48mm
|
|
*sorry none today*
|
|
|
replacement 48mm piston for sachs 80cc kits for 504 and 505 engines .. single ringed pleasure for you and him!
comes with piston, ring, clips and pin!
|
|
|
|
|
|
|
|
|
|
sachs decompression valve for 504 and 505
|
|
HERE NOW!!
|
|
|
replacement decompression valve for sachs 504 and 505, no more leaky leaky
|
|
|
|
|
|
|
|
|
|
MLM sachs G3 peoples pipe
|
|
HERE NOW!!
|
|
|
motion left mopeds peoples pipe.. designed to fit on a sachs G3! perfecto upgrade with performance for the people! Mounts on right side!
|
|
|
|
|
|
|
|
|
|
USED sachs decompression valve for 504 and 505
|
|
HERE NOW!!
|
|
|
the part that hooks onto the valve is a bit broken. you can fix it or use one from another decomp valve...anyway, mostly working and could save someone's sachs!!
|
|
|
|
|
|
|
|
|
|
sachs moped athena 80cc reed valve kit - 48mm - ***defective***
|
$250.00 alternate reality price $219.00
*sorry none today*
|
|
|
**one of the intake bolt holes not properly machined. must be fixed so special price 4 you!**
sachs 48mm 80cc athena reed valve cylinder for 504 and 505. This thing is beastly and for sure serious madness.
|
|
|
|
|
|
|
|
|
|
sachs AIRSAL 43.5mm 70cc cylinder kit with removable head
|
|
*sorry none today*
|
|
|
world's first sachs kit that ya can take the darn head off of!
|
|
|
|
|
|
|
|
|
|
MLM sachs G3 peoples pipe MOUNTING BRACKET
|
|
HERE NOW!!
|
|
|
MLM peoples pipe bracket for the sachs g3
|
|
|
|
|
|
|
|
|
|
MLM sachs n kreidler exhaust adapter - clamp style to flange
|
|
HERE NOW!!
|
|
|
MLM clamp to flange adapter for SACHS!
BREAKING NEWS this also works perfectly on KREIDLER
|
|
|
|
|
|
|
|
|
|
sachs moped athena 80cc reed valve kit - 48mm
|
|
HERE NOW!!
|
|
|
sachs 48mm 80cc athena reed valve cylinder for 504 and 505. This thing is beastly and for sure serious madness.
|
|
|
|
|
|
|
|
|
|
sachs moped athena 70cc cylinder kit for 504 and 505 - 45mm
|
|
HERE NOW!!
|
|
|
includes everything you need packed into a lovely rainbow box.
|
|
|
|
|
|
|
|
|
|
sachs athena 50cc cylinder kit for 504 & 505 - 38mm
|
|
HERE NOW!!
|
|
|
sachs 50cc kit produced by athena.
also use as beer mug, or water pipe
|
|
|
|
|
|
|
|
|
|
replacement PISTON for sachs AIRSAL 43.5mm kit
|
|
HERE NOW!!
|
|
|
replacement piston for the world's first sachs kit that ya can take the darn head off of!
|
|
|
|
|
|
|
|
|
|
replacement GASKET set for sachs AIRSAL 43.5mm kit
|
|
HERE NOW!!
|
|
|
replacement gaskets for the world's first sachs kit that ya can take the darn head off of!
|
|
|
|
|
|
|
|
|
|
replacement HEAD for sachs AIRSAL 43.5mm kit
|
|
HERE NOW!!
|
|
|
replacement HEAD for the world's first sachs kit that ya can take the darn head off of!
|
|
|
|
|
|
|
|
|
|
airsal 14mm ANGLE port bing intake for sachs
|
|
*sorry none today*
|
|
|
14mm angle port intake for their removable head kit but you can always use it on a stock angle port cylinder!!
|
|
|
|
|
|
|
|
|
|
sachs athena SHIFTY big 80cc 48mm head
|
|
HERE NOW!!
|
|
|
ok this is NOT for your moped. but, maybe you can use it somehow??
stud pattern is 56mm x 56mm center to center
|
|
|
|
|
|
|
|
|
|
sachs g3 engine mount brackets
|
|
HERE NOW!!
|
|
|
stainless steel engine mount brackets for sachs g3! these allow you to
remove the "cradle" and replace the top front mount with these brackets
|
|
|
|
|
|
|
|
|
|
replacement sachs ATHENA exhaust flange - 26mm
|
|
HERE NOW!!
|
|
|
replacement sachs athena aluminum exhaust flange for pretty much all of the athena sachs kits!!
26mm OD flange
|
|
|
|
|
|
|
|
|
|
used original sachs angled 14mm intake - 90 degrees
|
|
HERE NOW!!
|
|
|
used original sachs angled 14mm intake. almost an exact 90 degree angle. right on!
|
|
|
|
|
|
|
|
|
|
used original sachs ANGLED PORT 14mm intake - rounded
|
|
*sorry none today*
|
|
|
used original sachs angled 14mm intake. this one is rounded and bendy. right on!
|
|
|
|
|
|
|
|
|
|
MLM sachs G3 pipe bracket - version 2 mystery edition
|
$10.00 alternate reality price $8.99
HERE NOW!!
|
|
|
a mystery motion left mopeds laser cut mounting bracket for the sachs g3 peoples pipe...but slightly different. looks like it drops down a lil more than the regular one.
assists you in the mounting process like a good friend.
|
|
|
|
|
|
|
|
|
|
sachs 50/2 50/3 decompression block off plug
|
|
HERE NOW!!
|
|
|
decompression valve block off plug + gasket for the olde timer sachs
50/2 and 50/3 shifter motors!!
|
|
|
|
|
|
|
|
|
|
NOS sachs 504 505 and kreidler decompression valve - LONG
|
$69.99 alternate reality price $57.99
HERE NOW!!
|
|
|
new old stock original sachs decompression valve for 504 and 505.
also for KREIDLER!!
|
|
|
|
|
|
|
|
|
|
NOS original sachs angled 14mm intake - 90 degrees
|
|
HERE NOW!!
|
|
|
NOS original sachs angled 14mm intake. almost an exact 90 degree angle. right on!
oem sachs part numbers 0267 114 339 gk a4
|
|
|
|
|
|
|
|
|
|
used original sachs FLAT PORT 14mm intake - rounded
|
|
HERE NOW!!
|
|
|
used original sachs FLAT PORT 14mm intake. this one is rounded and bendy. right on!
|
|
|
|
|
|
|
|
|
|
sachs 504 505 angled 14mm intake with wedge - 90 degrees
|
|
HERE NOW!!
|
|
|
sachs angled 14mm intake. almost an exact 90 degree angle. even comes
with a cool lil wedge piece for using it on flat and angled port
intakes! right on!
replaces sachs part numbers 0267 114 399
|
|
|
|
|
|
|
|
|
|
sachs 38mm 50cc stock 505/1D style cylinder
|
|
*sorry none today*
|
|
|
sachs 50cc 38mm 505/1d style cylinder kit Includes everything shown + wrist pin and clips.
|
|
|
|
|
|
|
|
|
|
sachs stock piston - 38mm
|
|
HERE NOW!!
|
|
|
stock replacement piston for sachs mopeds. dual 2mm ring piston with piston, rings, wrist pin and clips included. im sure there are tons of different sachs engines, so check the dimensions within to make sure this will work for you!
also fits on some 38mm morini engines, as found on the clayford puma and others.
|
|
|
|
|
|
|
|
|
|
sachs 5V hercules complete gasket set
|
|
HERE NOW!!
|
|
|
complete gasket set for sachs 5V hercules motorbikes. i think there alot of different sachs bikes with the 5V engine.
|
|
|
|
|
|
|
|
|
|
sachs 50/2 + 50/3 clutch friction disk SET
|
|
HERE NOW!!
|
|
|
clutch friction disk set for a manual transmission Sachs motors 50/2 or 50/3.
|
|
|
|
|
|
|
|
|
|
sachs sparta met motorized bicycle exhaust pipe
|
|
*sorry none today*
|
|
|
new stock replacement exhaust pipe for sachs sparta met motorized bicycles.
|
|
|
|
|
|
|
|
|
|
sachs moped stock chrome exhaust baffle chamber - 28mm
|
|
HERE NOW!!
|
|
|
rear part of the sachs moped two part exhaust pipes. stock style chrome. unclog and restore some life to your stock sachs!
|
|
|
|
|
|
|
|
|
|
sachs clutch cover gasket
|
|
HERE NOW!!
|
|
|
clutch cover gasket for sachs 504, 505 engines!
|
|
|
|
|
|
|
|
|
|
sachs base gasket for 504 and 505
|
|
HERE NOW!!
|
|
|
base gasket for sachs 504, 505 engines!
|
|
|
|
|
|
|
|
|
|
sachs intake gasket
|
|
HERE NOW!!
|
|
|
intake gasket for sachs 504, 505 engines!
|
|
|
|
|
|
|
|
|
|
sachs gasket set for 70cc athena kits
|
|
HERE NOW!!
|
|
|
gasket set for sachs 70cc athena kits
|
|
|
|
|
|
|
|
|
|
puch + sachs athena reed block intake gaskets
|
|
HERE NOW!!
|
|
|
athena intake gasket set for this puch athena 50cc kit and this 70cc kit + the sachs moped athena 80cc 48mm reed valve kit
|
|
|
|
|
|
|
|
|
|
OEM sachs 505 clutch bell
|
|
HERE NOW!!
|
|
|
new old stock original clutch bell for sachs 505 motors!
sachs part # 0284.014.000
|
|
|
|
|
|
|
|
|
|
moped factory sachs bracket for peugeot exhaust
|
|
*sorry none today*
|
|
|
bracket for mounting a peugeot simonini circuit pipe to your sachs! yessss
made by the man himself graham motzing of milwaukee
in blue!
|
|
|
|
|
|
|
|
|
|
sachs stock 50cc top end gasket set
|
|
HERE NOW!!
|
|
|
a unique selection of sachs gaskets to help you on your way
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch wave washer
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 clutch wave washer
sachs part # 0245 122 100
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch special washer
|
|
HERE NOW!!
|
|
|
sachs 505 cutch special washer
original sachs part number = 0244.157.000
|
|
|
|
|
|
|
|
|
|
sachs 504 & 505 15 x 32 x 5 output shaft seal
|
|
HERE NOW!!
|
|
|
output shaft seal for sachs 505 and 504! + magneto side crank seal for batavus M56 & trac M56!
|
|
|
|
|
|
|
|
|
|
sachs athena 15mm bing intake - flat
|
|
HERE NOW!!
|
|
|
ID = 15mm - OD = 20mm - that's perfecto for da bing, and a little shimmy and it will work with a SHA, if your clever, cause it's not a shim we carry, it would have to be cut up pop can or something.
|
|
|
|
|
|
|
|
|
|
sachs athena 15mm bing intake - angled
|
|
HERE NOW!!
|
|
|
ID = 15mm - OD = 20mm - that's perfecto for da bing, and a little shimmy and it will work with a SHA, if your clever, cause it's not a shim we carry, it would have to be cut up pop can or something.
|
|
|
|
|
|
|
|
|
|
sachs 3/4 speed 60cc cylinder kit - 41mm
|
|
HERE NOW!!
|
|
|
sachs 60cc 41mm cylinder kit for the 3 speed and 4 speed moped motorcycle thing!
|
|
|
|
|
|
|
|
|
|
sachs rubber wire guide thingy
|
|
HERE NOW!!
|
|
|
rubber wire guide thingy for sachs motors!
|
|
|
|
|
|
|
|
|
|
sachs 505 performance clutch pad
|
|
HERE NOW!!
|
|
|
sachs 505 clutch pad. you need this cause yours is burnt up man.
|
|
|
|
|
|
|
|
|
|
rear SACHS sprocket - 32T
|
|
*sorry none today*
|
|
|
32T rear sprocket for some kind of sachs something do you know?
|
|
|
|
|
|
|
|
|
|
SACHS 50cc copper exhaust gasket
|
|
*sorry none today*
|
|
|
copper exhaust gasket for sachs 504, 505 engines!
|
|
|
|
|
|
|
|
|
|
sachs HERCULES chrome EBR forks
|
|
*sorry none today*
|
|
|
chrome EBR forks (supposedly) for the sachs hercules! tons of info inside to see if theyre right for you.....
|
|
|
|
|
|
|
|
|
|
sachs 2 part pipe - black
|
|
|
two part adjustable performance pipe for sachs mopeds!
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch arm PIN bolt
|
|
HERE NOW!!
|
|
|
new old stock original SACHS internal clutch arm actuator PIN for the 505 engine
sachs part # 0240-181-102
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch disk thing - 1.67mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch disk. you know what it is. says 1.67mm x 1.7mm. not sure what the 1.7mm is
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch shim - 1.26mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch shim
original sachs part number = 0244.154.003
1.26mm thick
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch shim - 0.20mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch shim
ID = 24.85mm
OD = 43.75mm
0.20mm thick
sachs part # 0244 154 004
|
|
|
|
|
|
|
|
|
|
sachs 504 & 505 15 x 35 x 7 magneto side seal
|
|
HERE NOW!!
|
|
|
magneto side seal for sachs 505 and 504!
|
|
|
|
|
|
|
|
|
|
sachs partial gasket set for 70/80cc athena kits
|
|
HERE NOW!!
|
|
|
partial gasket set for sachs athena kits! comes with a strange base gasket that has a sort of top transfer cut out, but wont doesnt really matter since it still covers all the sealing surface. so score if you have one but doesnt matter if you dont!
has a rad exhaust gasket that the sachs athena kits use, very specifically shaped
one intake gasket for the stock style intake...not the reed style
|
|
|
|
|
|
|
|
|
|
rear SACHS sprocket - 35T - dished
|
|
HERE NOW!!
|
|
|
35T rear sprocket for some kind of sach's something do you know?
41mm ID
33mm spacing between bolt pattern
14mm offset / dish
|
|
|
|
|
|
|
|
|
|
sachs METEOR 38mm single ring piston
|
|
|
HERE NOW stock replacement piston for sachs mopeds. single 1.5mm ring piston with piston, wrist pin and clips included
single ring for rippers only
we've got a couple different sizes to choose from. A (37.96mm), B (37.97mm), C (37.98mm), D (37.99mm) and E (38.00mm).
|
|
|
|
|
|
|
|
|
|
sachs METEOR dual ring piston in a couple sizes
|
|
|
HERE NOW! super high quality METEOR stock replacement piston for sachs mopeds. dual 2mm ring pistons with piston, wrist pin and clips included.
available in 37.97mm, 37.98mm, 37.99mm and 38.00mm! check within to see what's currently in stock.
|
|
|
|
|
|
|
|
|
|
sachs moped athena PISTON PORT 80cc cylinder kit - 48mm
|
|
HERE NOW!!
|
|
|
48mm single ringed kit!!! woaahhh. this version is piston port rather than reed valve like its beastly twin.
please take me home i am lonely and tired of hangin out on a treatland shelf waiting for something to happen
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 / 504 gasket - base
|
$5.99 alternate reality price $1.49
*sorry none today*
|
|
|
NOS base gasket for sachs 504 and 505 motors! original replacement, in good condition for ya!
0.3mm thick
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 / 504 gasket - intake
|
|
HERE NOW!!
|
|
|
NOS intake gasket for sachs 504 and 505 motors! original replacement, in good condition for ya!
1mm thick
|
|
|
|
|
|
|
|
|
|
sachs 504 505 grey plastic oil fill PLUG
|
|
HERE NOW!!
|
|
|
the long sought after, always flathead gouged-out n destroyed sachs 504 505 transmission oil fill plug!!!
behold!
|
|
|
|
|
|
|
|
|
|
sachs rear brake rod
|
|
HERE NOW!!
|
|
|
sachs rear brake plate rod long stick pulling device! attaches to your brake plate and another mechanism...check measurements inside if you wanna experiment..
|
|
|
|
|
|
|
|
|
|
sachs 504 505 drain BOLT
|
|
HERE NOW!!
|
|
|
carefully tweezed out of the grand bolt index at treatz, we present to you a sachs drain bolt!!
|
|
|
|
|
|
|
|
|
|
USED universal 16" front snowflake mag wheel
|
$79.99 alternate reality price $63.99
HERE NOW!!
|
|
|
USED universal 16in snowflake wheel for whatever you want. centered
brake plate tab should work on many different forks. found on many
italian bikes such as minarelli, garelli, morini, etc. plus sachs n such.
16" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
sachs to puch cylinder adapter plate
|
|
HERE NOW!!
|
|
|
this handy aluminum plate allows you to mount a puch cylinder to a sachs 504 or 505!! now you can rip the legendary malossi 62cc puch kit on your sachs!!
|
|
|
|
|
|
|
|
|
|
new old stock sachs 504 505 oil fill plug
|
|
HERE NOW!!
|
|
|
NEW OLD STOCK original sachs 504 505 transmission oil fill plug!!!
|
|
|
|
|
|
|
|
|
|
ILO g50 piano stock piston - 38mm
|
|
HERE NOW!!
|
|
|
ILO / JLO g50 piano stock piston. idk why everywhere on the internet keeps calling them ILO when it clearly says JLO on the clutch cover?
|
|
|
|
|
|
|
|
|
|
ILO g50 piano clutch friction plate set
|
|
*sorry none today*
|
|
|
ILO / JLO g50 piano replacement clutch friction plates! just in case you smoked your clutches doing too many sick burnouts
|
|
|
|
|
|
|
|
|
|
ILO g50 piano clutch SPRING set
|
|
*sorry none today*
|
|
|
ILO / JLO g50 piano replacement clutch springs! just in case your springs got all clapped out over the years!
|
|
|
|
|
|
|
|
|
|
ILO g50 piano crankshaft seal 15 x 26 x 7
|
|
HERE NOW!!
|
|
|
ILO / JLO g50 piano crankshaft seat!! sb2 type metal seal.
|
|
|
|
|
|
|
|
|
|
ILO g50 piano complete gasket set
|
|
HERE NOW!!
|
|
|
complete gasket set for the ilo / jlo g50 piano
|
|
|
|
|
|
|
|
|
|
ILO g50 piano RITO race crankshaft
|
|
HERE NOW!!
|
|
|
ILO / JLO g50 piano RITO racing crankshaft!
|
|
|
|
|
|
|
|
|
|
6003 c3 bearing for ILO g50 piano
|
|
HERE NOW!!
|
|
|
ILO / JLO g50 piano crankcase bearing!!
|
|
|
|
|
|
|
|
|
|
sachs spartamet full gasket and o-ring set
|
|
HERE NOW!!
|
|
|
full gasket set for the sachs / hercules spartamet motorized bicycle thing!
|
|
|
|
|
|
|
|
|
|
sachs spartamet high tension coil / stator assembly
|
|
HERE NOW!!
|
|
|
sachs / hercules spartamet high tension coil / stator plate assembly!! this really does it all!
|
|
|
|
|
|
|
|
|
|
sachs spartamet float needle set
|
|
HERE NOW!!
|
|
|
float needle set for the sachs spartamet bicycle wheel thing!! includes a float needle, float pin and the float lever arm thing
|
|
|
|
|
|
|
|
|
|
sachs spartamet carburetor repair set
|
|
HERE NOW!!
|
|
|
"repair" set for the stock carb found on sachs spartamet! appears to be some sort of idle adjustment screw? maybe a mixture screw?
|
|
|
|
|
|
|
|
|
|
sachs spartamet petcock
|
|
HERE NOW!!
|
|
|
replacement petcock for sachs / hercules spartamet!! this does not have threads!
|
|
|
|
|
|
|
|
|
|
sachs spartamet stock piston - 32.96mm
|
|
HERE NOW!!
|
|
|
replacement stock piston kit for sachs / hercules spartamet!! it's so tiny n cute!! very chain saw esque....
|
|
|
|
|
|
|
|
|
|
sachs spartamet FRONT brake cable
|
|
HERE NOW!!
|
|
|
replacement front brake cable for the sachs / hercules spartamet bicycle motor!! this is of the original sparta built step thru bike that hosted the sachs motor!! may not work on your gary fisher or whatever you have yours mounted to!
|
|
|
|
|
|
|
|
|
|
sachs spartamet REAR brake cable
|
|
HERE NOW!!
|
|
|
replacement REAR brake cable for the sachs / hercules spartamet bicycle motor!! this is of the original sparta built step thru bike that hosted the sachs motor!! may not work on your gary fisher or whatever you have yours mounted to!
|
|
|
|
|
|
|
|
|
|
sachs spartamet CHOKE cable
|
|
HERE NOW!!
|
|
|
replacement CHOKE cable for the sachs / hercules spartamet bicycle motor!!
|
|
|
|
|
|
|
|
|
|
sachs spartamet THROTTLE cable
|
|
HERE NOW!!
|
|
|
replacement THROTTLE cable for the sachs / hercules spartamet bicycle motor!!
|
|
|
|
|
|
|
|
|
|
NOS sachs 504 & 505 clutch hub gear
|
|
*sorry none today*
|
|
|
NOS clutch hub for 504 and 505, a crucial part of all your sachs rebuilds?
|
|
|
|
|
|
|
|
|
|
NOS 10" mini fantic lei 5 star grimeca mag - FRONT
|
$99.99 alternate reality price $69.99
HERE NOW!!
|
|
|
NOS mini 10" x 2.10" grimeca 5 star front wheel for anything ya want!! these came on the fantic lei and some other lil italian mopeds.
|
|
|
|
|
|
|
|
|
|
used sachs 505 clutch disk thing - 2.5mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch disk. you know what it is. 2.5mm thick & sachs OEM part # 0258.014.201
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch disk thing - 2.5mm thick
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 clutch disk. you know what it is.
2.5mm ish thick
sachs part number 0258 014 201
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch shim - 0.53mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch shim
ID = 24.85mm
OD = 43.75mm
0.53mm thick
sachs part # 0244 154 000
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch shim - 1.00mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch shim
ID = 24.85mm
OD = 43.75mm
1.00mm thick
sachs part # 0244 154 002
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch shim - 1.05mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch shim
ID = 24.85mm
OD = 43.75mm
1.05mm thick
sachs part # 0244 154 002
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch disk thing - 2.5mm thick
|
|
*sorry none today*
|
|
|
sachs 505 clutch disk. you know what it is. says 2.5mm x 1.7mm. not sure what the 1.7mm is
original sachs part number = 0258.014.200
|
|
|
|
|
|
|
|
|
|
NOS original sachs overbore piston - 38.58mm
|
|
HERE NOW!!
|
|
|
new old stock replacement overbore piston for sachs mopeds. dual 2mm
ring piston with piston, rings, wrist pin and clips included. im sure
there are tons of different sachs engines, so check the dimensions to
make sure this will work for you!
sachs part # 0286 378 006/rot
|
|
|
|
|
|
|
|
|
|
sachs METEOR dual ring piston v2 in a couple sizes
|
|
|
HERE NOW! super high quality METEOR stock replacement piston version 2 for sachs mopeds. dual 2mm ring pistons with piston, wrist pin and clips included.
this is the version 2 type with a slightly shorter overall length.
available in 37.97mm, 37.98mm, 37.99mm and 38.00mm! check within to see what's currently in stock.
|
|
|
|
|
|
|
|
|
|
METEOR 0290 sachs stock piston - 38mm
|
|
HERE NOW!!
|
|
|
METEOR 0290 series stock replacement piston for sachs. dual 2mm ring
piston with piston, rings, wrist pin and clips included. im sure there
are tons of different sachs engines, so check the dimensions to make
sure this will work for you!
38mm diameter
|
|
|
|
|
|
|
|
|
|
METEOR 0290 sachs stock piston - 40mm
|
|
HERE NOW!!
|
|
|
METEOR 0290 series stock replacement piston for sachs. dual 2mm ring
piston with piston, rings, wrist pin and clips included. im sure there
are tons of different sachs engines, so check the dimensions to make
sure this will work for you!
40mm diameter
|
|
|
|
|
|
|
|
|
|
sachs 505 clutch shim - 1.7mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 clutch shim
ID = 24.85mm
OD = 43.75mm
1.70mm thick
sachs part # 0244 154 003
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch pressure cup
|
|
HERE NOW!!
|
|
|
sachs 505 clutch pressure cup
sachs part number 0284.016.000
|
|
|
|
|
|
|
|
|
|
sachs 504 & 505 clutch spring hub
|
|
HERE NOW!!
|
|
|
sachs 504 & 505 clutch spring hub. a necessary part of the clutch assembly
|
|
|
|
|
|
|
|
|
|
USED 10" mini italian spoked wheel - REAR
|
$70.00 alternate reality price $45.00
HERE NOW!!
|
|
|
USED mini 10" spoke rear wheel for anything ya want!! these came on italian lil guy bikes but are super universal and you can make em fit on whatever ya want with relative ease!
the rims have some rust but are still perfectly usable! much less rust than the one in the picture!! score!
|
|
|
|
|
|
|
|
|
|
sachs 504 VITON seal set
|
|
HERE NOW!!
|
|
|
sachs 504 complete VITON seal set!
comes with one of the following seals:
15 x 35 x 7mm (flywheel side crankshaft seal)
15 x 32 x 5.5mm (output shaft seal)
15 x 30 x 5mm (clutch side crankshaft seal)
|
|
|
|
|
|
|
|
|
|
sachs 505 VITON seal set
|
|
HERE NOW!!
|
|
|
sachs 505 complete VITON seal set!
comes with one of the following seals:
15 x 35 x 7mm (flywheel side crankshaft seal)
15 x 32 x 5.5mm (output shaft seal)
15 x 30 x 5mm (clutch side crankshaft seal)
15 x 24 x 5mm 2pcs (pedal shaft seals)
|
|
|
|
|
|
|
|
|
|
viton seal - 15 x 35 x 7
|
|
HERE NOW!!
|
|
|
VITON oil seal for sachs 504 & 505 magneto side
15 x 35 x 7
|
|
|
|
|
|
|
|
|
|
viton seal - 15 x 32 x 5.5
|
|
HERE NOW!!
|
|
|
VITON sachs 504 & 505 output shaft seal
also magneto side seal for batavus & trac M56
15 x 32 x 5.5
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 crank shim - 0.30mm thick
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 crank shim. this shim goes on the
magneto side of the crank between the right crank lobe and bearing
OD = 20mm
ID = 15mm
0.30mm thick
sachs part number = 0246 009 000
|
|
|
|
|
|
|
|
|
|
sachs 505 3 speed gearbox bushing - 15.50mm ID
|
|
HERE NOW!!
|
|
|
replacement bushing for sachs 505/3 3 speed shifter engines!! check the measurements below.
15.50mm ID
20mm OD (with 22mm flange OD)
9mm wide
sachs part # 0232 195 001
|
|
|
|
|
|
|
|
|
|
nos sachs clutch cover gasket
|
|
HERE NOW!!
|
|
|
NOS clutch cover gasket for sachs 504 and 505 motors!
sachs part # 0250.155.300
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 504 clutch spring
|
|
HERE NOW!!
|
|
|
NOS original replacement sachs clutch spring!!
sachs part # 0239 137 100
|
|
|
|
|
|
|
|
|
|
NOS sachs clutch spring WEIGHT
|
|
HERE NOW!!
|
|
|
NOS original replacement sachs clutch spring weight!!
just in case ya lost one or two of em
|
|
|
|
|
|
|
|
|
|
sachs 504 505 rubber motor mount
|
|
HERE NOW!!
|
|
|
replacement rubber motor/engine mount bushings plus center spacer for sachs 504 and 505!
this set is for one motor mount. 504 uses two of these sets and 505 uses 3 sets!!!
|
|
|
|
|
|
|
|
|
|
sachs 50/2 50/3 50/4 50/5 clutch spring SET
|
|
*sorry none today*
|
|
|
replacement clutch spring set for ye olde sachs 50/2, 50/3 50/4, 50/5 and more!
22mm long
8.3mm OD
5.6mm ID
set of 10 springs
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 crank shim - 0.10mm thick
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 crank shim. this shim goes on the
magneto side of the crank between the right crank lobe and bearing
OD = 20mm
ID = 15mm
0.10mm thick
sachs part number = 0246.009.003
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 504 clutch arm
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 504 clutch arm/lever
sachs part number 0248 150 200
|
|
|
|
|
|
|
|
|
|
NOS sachs 504 505 transmission gear
|
|
HERE NOW!!
|
|
|
new old stock original transmission gear for sachs 504 and 505 engines.
27t big gear
10t small gear
sold INDIVIDUALLY!
sachs part # 0285 123 000
|
|
|
|
|
|
|
|
|
|
NOS sachs m6 x 20mm socket cap screw pack
|
|
HERE NOW!!
|
|
|
new old stock original SACHS m6 x 20mm low profile socket cap screw pack!
you get 10pcs!
sachs part # 0240-191-002
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 clutch arm pin bolt SPRING
|
|
HERE NOW!!
|
|
|
new old stock original SACHS internal clutch arm actuator pin SPRING for the 505 engine
sachs part # 0239 136 200
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 crank shim - 0.20mm thick
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 crank shim. this shim goes on the
magneto side of the crank between the right crank lobe and bearing
OD = 20mm
ID = 15mm
0.20mm thick
sachs part number = 0246 009 007 and 0246 009 004
|
|
|
|
|
|
|
|
|
|
sachs 505 output shaft shim - 0.50mm thick
|
|
*sorry none today*
|
|
|
sachs 505 output shaft shim
OD = 19mm
ID = 13mm
0.50mm thick
sachs part number = 0244.006.000
|
|
|
|
|
|
|
|
|
|
sachs 505 output shaft shim - 0.10mm thick
|
|
HERE NOW!!
|
|
|
sachs 505 output shaft shim
OD = 19mm
ID = 13mm
0.10mm thick
sachs part number = 0244.006.007
|
|
|
|
|
|
|
|
|
|
monark rubber motor mount - 34mm
|
|
HERE NOW!!
|
|
|
replacement rubber motor/engine mount bushing for monark mopeds!!
12mm ID
26mm OD
34mm length
|
|
|
|
|
|
|
|
|
|
monark rubber motor mount - 44mm
|
|
HERE NOW!!
|
|
|
replacement rubber motor/engine mount bushing for monark mopeds!!
12mm ID
25mm OD
44mm length
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 crank shim - 1.00mm thick
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 crank shim. this shim goes on the
magneto side of the crank between the right crank lobe and bearing
OD = 20mm
ID = 15mm
1.00mm thick
sachs part number = 0246 009 002
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 crank shim - 0.80mm thick
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 crank shim. this shim goes on the
magneto side of the crank between the right crank lobe and bearing
OD = 20mm
ID = 15mm
0.80mm thick
sachs part number = 0246 009 005
|
|
|
|
|
|
|
|
|
|
sachs 50/2 50/3 50/4 hercules complete gasket set
|
|
HERE NOW!!
|
|
|
complete gasket set for sachs, hercules and ktm motorbikes with the sachs 50/2, 50/3, and 50/4 engines!
|
|
|
|
|
|
|
|
|
|
sachs 3 speed manual shift oil seal set
|
|
*sorry none today*
|
|
|
oil seal set for sachs 3 gear manual shift engines!!
|
|
|
|
|
|
|
|
|
|
sachs 50/2 50/3 50/4 hercules oil seal - clutch arm
|
|
HERE NOW!!
|
|
|
clutch arm oil seal for sachs 50/2, 50/3, and 50/4!!
replaces sachs part # 0650 017 000
|
|
|
|
|
|
|
|
|
|
sachs 50/3 hercules rubber engine mount
|
|
*sorry none today*
|
|
|
rubber engine mount for sachs 50/3!!
replaces sachs part # 0260 021 008
|
|
|
|
|
|
|
|
|
|
wicked CDI flywheel - puch / sachs 505 / batavus m48 / solo / derbi
|
|
HERE NOW!!
|
|
|
ahh yes just thee flywheel for our new ignitions!! also lightened flywheel for certain OEM tomos ignitions, see within for more info!
|
|
|
|
|
|
|
|
|
|
NOS sachs KTM foxi stock exhaust - 2150-7099
|
$149.99 alternate reality price $99.99
HERE NOW!!
|
|
|
new old stock sachs KTM foxi chrome exhaust!!!
|
|
|
|
|
|
|
|
|
|
NOS sachs hercules exhaust CLAMP - 30mm
|
|
HERE NOW!!
|
|
|
new old stock sachs hercules chrome exhaust clamp!!!
30mm ID
part # 969 98 39 000
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 crank washer - 0244 153 000
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 crank washer.
OD = 36.8mm
ID = 30.2mm
1.55mm thick
sachs part # 0244 153 000
|
|
|
|
|
|
|
|
|
|
NOS sachs 1001/5a 1251/a 5th gear
|
|
HERE NOW!!
|
|
|
new old stock original sachs 5th gear for the 1001/5a and 1251/a engines!
31t
sachs part # 0634 110 001
|
|
|
|
|
|
|
|
|
|
NOS sachs shim - 0244 006 007
|
|
HERE NOW!!
|
|
|
new old stock original sachs shim. not too sure which model engines this is for but maybe you do?
OD = 17.75mm
ID = 13mm
0.20mm thick
sachs part number = 0244 006 007
|
|
|
|
|
|
|
|
|
|
NOS sachs shim - 0244 006 006
|
|
HERE NOW!!
|
|
|
new old stock original sachs shim. not too sure which model engines this is for but maybe you do?
OD = 17.75mm
ID = 13mm
0.22mm thick
sachs part number = 0244 006 006
|
|
|
|
|
|
|
|
|
|
NOS sachs shim - 0244 006 004
|
|
HERE NOW!!
|
|
|
new old stock original sachs shim. not too sure which model engines this is for but maybe you do?
OD = 17.75mm
ID = 13mm
0.65mm thick
sachs part number = 0244 006 004
|
|
|
|
|
|
|
|
|
|
NOS sachs shim - 0244 006 002
|
|
HERE NOW!!
|
|
|
new old stock original sachs shim. not too sure which model engines this is for but maybe you do?
OD = 17.75mm
ID = 13mm
0.85mm thick
sachs part number = 0244 006 002
|
|
|
|
|
|
|
|
|
|
NOS sachs shim - 0244 006 000
|
|
HERE NOW!!
|
|
|
new old stock original sachs shim. not too sure which model engines this is for but maybe you do?
OD = 17.75mm
ID = 13mm
0.55mm thick
sachs part number = 0244 006 000
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 transmission brake SPRING
|
|
HERE NOW!!
|
|
|
new old stock original transmission brake for sachs 504 and 505 engines.
27t big brake
10t small brake
sold INDIVIDUALLY!
sachs part # 0239 051 001
|
|
|
|
|
|
|
|
|
|
NOS sachs flat head bolt - m6 x 40mm
|
|
HERE NOW!!
|
|
|
new old stock original SACHS m6 bolt!!
m6 x 1.00 threading
40mm length
sachs part # 2640 022 002
|
|
|
|
|
|
|
|
|
|
NOS sachs 504 505 clutch inner guide ring
|
|
HERE NOW!!
|
|
|
new old stock original SACHS internal clutch inner guide ring with 3.5mm holes for the 504 and 505 engines.
goes behind the clutch hub gear!
sachs part # 0247 141 001
|
|
|
|
|
|
|
|
|
|
NOS sachs 504 505 clutch bell inner washer
|
|
HERE NOW!!
|
|
|
new old stock original SACHS internal clutch bell inner washer with oiling holes for the 504 and 505 engines.
sachs part # 0244 112 000
|
|
|
|
|
|
|
|
|
|
sachs 504 505 bushing - 0232 155 001
|
|
HERE NOW!!
|
|
|
new old stock original bushing for pretty much all sachs 504 and 505 engines!! check the measurements below.
13mm ID
18mm OD (with 22mm flange OD)
10mm wide
sachs part # 0232 155 001
|
|
|
|
|
|
|
|
|
|
sachs 504 505 bushing -0247 105 000
|
|
HERE NOW!!
|
|
|
new old stock original bushing for pretty much all sachs 504 and 505 engines!! check the measurements below.
13.5mm ID
18mm OD
14.3mm wide
sachs part # 0247 105 000
|
|
|
|
|
|
|
|
|
|
NOS sachs hex head INTAKE bolt - m6 x 24mm
|
|
HERE NOW!!
|
|
|
new old stock original SACHS m6 intake bolt!!
m6 x 1.00 threading
24mm length
sachs part # 0240 003 104
|
|
|
|
|
|
|
|
|
|
sachs dowel pin - 0949 090 000
|
|
HERE NOW!!
|
|
|
SACHS dowel pin 50/A, 50/2 50/3, 50/4, etc.
8.4mm diameter
10mm length
sachs part # 0949 090 000
|
|
|
|
|
|
|
|
|
|
sachs 50/A 50/2 50/3 50/4 clutch arm oil seal
|
|
HERE NOW!!
|
|
|
SACHS clutch arm oil seal for 50/A, 50/2 50/3, 50/4, etc.
13mm ID
19mm OD
2.5mm thick
|
|
|
|
|
|
|
|
|
|
sachs 50/A 50/2 50/3 50/4 506 loose needle bearing
|
|
HERE NOW!!
|
|
|
SACHS loose needle bearing for 50/A, 50/2 50/3, 50/4, etc.
4mm OD
6mm length
replaces sachs part # 0232 002 000
|
|
|
|
|
|
|
|
|
|
rear SACHS sprocket - 35T
|
|
HERE NOW!!
|
|
|
35T rear sprocket for some kind of sach's something do you know?
42.5mm ID
65mm BCD
|
|
|
|
|
|
|
|
|
|
sachs hercules PRIMA cable holder
|
|
HERE NOW!!
|
|
|
nifty little wire/cable holder guy for sachs/hercules mopeds!!
also super universal and can be used on pretty much any moped for keeping those cables at bay.
|
|
|
|
|
|
|
|
|
|
sachs 501 50S oil seal set
|
|
HERE NOW!!
|
|
|
oil seal set for old timer sachs 501 and 50S engines!!
comes with 4 seals
|
|
|
|
|
|
|
|
|
|
sachs 505 engine bolt set
|
|
HERE NOW!!
|
|
|
SACHS socket cap bolt set for the 505 engine!
|
|
|
|
|
|
|
|
|
|
NOS sachs 504 505 rubber motor mount - by the piece
|
|
HERE NOW!!
|
|
|
new old stock original rubber motor/engine mount bushing for sachs 504 and 505!
sachs part # 0251 121 000
|
|
|
|
|
|
|
|
|
|
NOS sachs hercules exhaust CLAMP - 28mm
|
|
HERE NOW!!
|
|
|
new old stock sachs hercules chrome exhaust clamp!!!
28mm ID
sachs part # 0251 113 105
|
|
|
|
|
|
|
|
|
|
NOS colombia commuter 420 sprocket - 42t
|
|
HERE NOW!!
|
|
|
42T rear sprocket for colombia mopeds!
45.5mm ID
67mm BCD
colombia part # 713-0227
|
|
|
|
|
|
|
|
|
|
sachs 50/4 tempo chain tensioner set
|
|
HERE NOW!!
|
|
|
SACHS 50/4 chain adjuster / tensioner set!!
for some serious oldtimer bikes like TEMPO that used the sachs 50/4 engine.
replaces tempo part #s 88 609 46 (707 55 534) and 88 609 44 (707 33 533)
|
|
|
|
|
|
|
|
|
|
NOS 10" mini grimeca snowflake wheel - FRONT
|
$99.99 alternate reality price $69.99
HERE NOW!!
|
|
|
NOS mini 10" grimeca snowflake front wheel for anything ya want!! these
came on italian lil guy bikes but are super universal and you can make
em fit on whatever ya want with relative ease.
great for building the ultimate RAT FINK chopper THINGAMABOBBER!!!
|
|
|
|
|
|
|
|
|
|
NOS 17" grimeca snowflake FRONT wheel - GOLD
|
$149.99 alternate reality price $129.99
HERE NOW!!
|
|
|
NOS front gold grimeca snowflake mag wheel. not 100 percent sure which
this is for, but definitely for something italian...think minarelli,
morini, garelli, pacer, etc. definitely easy to adapt to whatever ya
want.
|
|
|
|
|
|
|
|
|
|
NOS 10" mini bernardi 12 spoke mag - FRONT
|
$99.99 alternate reality price $59.99
HERE NOW!!
|
|
|
NOS mini 10" x 2.10" bernardi 12 spoke front wheel for anything ya want!! these came on tomos TX50!!
|
|
|
|
|
|
|
|
|
|
NOS 10" mini grimeca snowflake wheel SET
|
$199.99 alternate reality price $174.99
HERE NOW!!
|
|
|
NOS mini 10" grimeca snowflake wheel set for anything ya want!! these
came on italian lil guy bikes but are super universal and you can make
em fit on whatever ya want with relative ease.
make your bike SMOL
|
|
|
|
|
|
|
|
|
|
NOS 16" / 17" grimeca snowflake wheel SET - GOLD
|
$339.99 alternate reality price $269.99
HERE NOW!!
|
|
|
NOS gold grimeca snowflake mag wheel set. pretty sure these are for garelli. definitely for something italian...probably some tubone type bike. think minarelli, morini, garelli, pacer, etc. definitely easy to adapt to whatever ya want.
17" x 1.35" front
16" x 1.35" rear
|
|
|
|
|
|
|
|
|
|
USED 16" mystery bernardi CLOVER mag - FRONT
|
$89.99 alternate reality price $59.99
HERE NOW!!
|
|
|
USED mystery 16" bernardi CLOVER mag FRONT wheel for anything ya want!!
some
paint peeling action and corrosion. you'll wanna replace the loose ball
bearings, axle and probably replace the brake pads. brake plate is
missing actuator arm.
|
|
|
|
|
|
|
|
|
|
USED 17" mystery grimeca 3 star mag - REAR
|
$89.99 alternate reality price $64.99
HERE NOW!!
|
|
|
USED mystery 17" grimeca 3 star mag rear wheel for anything ya want!! VERY similar to the fantic sprinter wheel, but with ever so slightly slanted spokes.
spins nice n true + has sealed wheel bearings!! score!!
|
|
|
|
|
|
|
|
|
|
USED 17" fantic sprinter grimeca 3 star mag - REAR
|
$89.99 alternate reality price $59.99
HERE NOW!!
|
|
|
USED mystery 17" grimeca 3 star mag rear wheel for anything ya want!! im pretty sure this is for fantic sprinter!!!
|
|
|
|
|
|
|
|
|
|
NOS gold 16" grimeca snowflake wheel - REAR
|
$99.99 alternate reality price $84.99
HERE NOW!!
|
|
|
NOS gold grimeca rear snowflake mag wheel. pretty sure these are for garelli. definitely for something italian...probably some tubone type bike. think minarelli, morini, garelli, pacer, etc. definitely easy to adapt to whatever ya want.
|
|
|
|
|
|
|
|
|
|
sachs 504 505 oil seal set - metal type
|
|
HERE NOW!!
|
|
|
oil seal set for old timer sachs 501 and 50S engines!!
you get the following seal sizes:
-(2) 15mm x 20mm x 5.5mm
-(1) 15mm x 32mm x 5.5mm
-(1) 15mm x 35mm x 7mm
-(1) 17mm x 24mm x 4mm
|
|
|
|
|
|
|
|
|
|
sachs 505/3 clutch arm
|
|
HERE NOW!!
|
|
|
replacement sachs 505/3 BX clutch arm. the 505/3 is a 3 speed shifter
engine that never came to the USA en masse, but some have popped up here
over the years!
replaces sachs part # 0248 154 100
|
|
|
|
|
|
|
|
|
|
NOS 16" grimeca snowflake wheel SET - SILVER
|
$339.99 alternate reality price $269.99
HERE NOW!!
|
|
|
NOS silver grimeca 16" snowflake mag wheel set. pretty sure these are
for garelli. definitely for something italian...probably some tubone
type bike. think minarelli, morini, garelli, pacer, etc. definitely easy
to adapt to whatever ya want.
17" x 1.35" rim size
|
|
|
|
|
|
|
|
|
|
NOS silver 16" grimeca snowflake wheel - FRONT
|
$149.99 alternate reality price $124.99
HERE NOW!!
|
|
|
new old stock silver grimeca FRONT snowflake mag wheel. pretty sure
these are for garelli. definitely for something italian...probably some
tubone type bike. think minarelli, morini, garelli, pacer, etc.
definitely easy to adapt to whatever ya want.
11mm loose bearing axle!
|
|
|
|
|
|
|
|
|
|
NOS silver 16" grimeca snowflake wheel - REAR
|
$149.99 alternate reality price $122.99
HERE NOW!!
|
|
|
new old stock silver grimeca REAR snowflake mag wheel. pretty sure
these are for garelli. definitely for something italian...probably some
tubone type bike. think minarelli, morini, garelli, pacer, etc.
definitely easy to adapt to whatever ya want.
12mm loose bearing axle!
|
|
|
|
|
|
|
|
|
|
sachs 50/2 50/3 50/4 hercules complete gasket set - v2
|
|
HERE NOW!!
|
|
|
complete gasket set for sachs, hercules and ktm motorbikes with the sachs 50/2, 50/3, and 50/4 engines!
version 2 features some seriously thick cork gaskets!
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 drive gear
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 main drive gear!
77t
sachs part # 0234 151 299
|
|
|
|
|
|
|
|
|
|
sachs moped bosch internal mini ignition coil
|
|
HERE NOW!!
|
|
|
this is an original bosch internal ignition coil for sachs mopeds.
|
|
|
|
|
|
|
|
|
|
DEADPED sachs intake spacer
|
|
HERE NOW!!
|
|
|
riser/spacer for flat intake port sachs cylinders
this riser will allow you to use amal, PHBG and round bing type carbs on sachs with the carb in the same rear facing position.
|
|
|
|
|
|
|
|
|
|
boyesen carbon reeds for ATHENA sachs & puch
|
|
HERE NOW!!
|
|
|
carbon reed set for sachs moped athena reed kits and the puch athena reed kits
0.3mm thick
|
|
|
|
|
|
|
|
|
|
xtreme BLACK adjustable 10mm shocks - 320mm
|
|
HERE NOW!!
|
|
|
usable on most mopeds with approx 320mm shocks
|
|
|
|
|
|
|
|
|
|
xtreme CHROME adjustable 10mm shocks - 320mm
|
|
HERE NOW!!
|
|
|
these shocks are 320mm and will work perfectly on lotsa bikes! check your eye to eye measurements and grab what ya need!
|
|
|
|
|
|
|
|
|
|
xtreme CHROME adjustable 10mm shocks - 280mm
|
|
*sorry none today*
|
|
|
these shocks are 280mm and will work perfectly on tons of bikes, do some measurin' and figure it out
|
|
|
|
|
|
|
|
|
|
xtreme CHROME adjustable 10mm shocks - 300mm
|
|
HERE NOW!!
|
|
|
these shocks are 300mm and will work perfectly on any maxi, newport, pinto, swinger, motobecane, peugeot, sachs, etc
|
|
|
|
|
|
|
|
|
|
front sprocket for minarelli V1 & V1L
|
|
|
IN STOCK? check it out
front sprocket for minarelli V1, V1L and other mystery mopeds. choose your size we carry 8T, 9T, 10T, 11T, 12T, 13T and 15T.
|
|
|
|
|
|
|
|
|
|
sachs 505 OB1 performance clutch spring + 15%
|
|
HERE NOW!!
|
|
|
15% stiffer clutch springs for sachs 505 mopeds, plenty of info to be found on these here
|
|
|
|
|
|
|
|
|
|
replacement chromed piston ring for sachs - 48mm x 1.5mm
|
|
HERE NOW!!
|
|
|
replacement chromed ring for sachs athena 80cc kits and possibly others of course!
|
|
|
|
|
|
|
|
|
|
USED sachs flywheel cover
|
|
HERE NOW!!
|
|
|
wow, a sachs flywheel cover!
these may or may not say "sachs" on em but they'll do the job of covering all yer 'lectric stuff!
|
|
|
|
|
|
|
|
|
|
fully BLACK adjustable shocks - 330mm
|
|
HERE NOW!!
|
|
|
I made these cause i felt so bad we had 320mm and 340mm, but no 330mm. I'm sure they gotta fit on something tho. I guess.
|
|
|
|
|
|
|
|
|
|
Sachs 504 stator and flywheel ignition completo
|
|
HERE NOW!!
|
|
|
80mm complete ignition with internal coil for sachs 504. just make sure you need the 80mm size. NOT for sachs 505 NO NO NO,I SAY NO.
|
|
|
|
|
|
|
|
|
|
NOS OEM front sprocket for minarelli V1 & V1L
|
|
|
IN STOCK? check it out
NOS OEM front sprocket for minarelli V1 & V1L. choose your size - we carry 9T, 10T, 11T, 12T and 13T.
|
|
|
|
|
|
|
|
|
|
NEW sachs flywheel cover in chrome
|
|
HERE NOW!!
|
|
|
wow, a NEW chrome sachs flywheel cover! pop this over your sachs 504 or 505 flywheel and it will be lookin shiny and new!
about 125mm ID
sachs part # 0244 167 100
|
|
|
|
|
|
|
|
|
|
USED sachs clutch cover
|
|
HERE NOW!!
|
|
|
USED clutch cover for sachs 504 and 505 motors! these have some
scratches and could use a quick clean but will function perfectooo
|
|
|
|
|
|
|
|
|
|
ATHENA chromed piston ring - 48mm x 2mm - dykes
|
|
HERE NOW!!
|
|
|
replacement chromed dykes ring by athena.
48mm x 2.00mm - dykes aka "L" type ring
|
|
|
|
|
|
|
|
|
|
NOS sachs clutch cover
|
|
*sorry none today*
|
|
|
nos clutch cover for sachs 504 and 505 motors!
sachs part # 0277 117 000
|
|
|
|
|
|
|
|
|
|
NOS sachs 505 flywheel cover - 125mm
|
|
HERE NOW!!
|
|
|
new old stock original sachs 505 flywheel / magneto cover!!
about 125mm ID!
sachs part # 0244 167 000
|
|
|
|
|
|
|
|
|
|
magura throttle assembly with integrated choke for sachs saxonette
|
|
HERE NOW!!
|
|
|
magura throttle for sachs saxonette and whatever else you like. very interesting integrated choke design. black plastic lever with no threading for brake light and no spring for lever
|
|
|
|
|
|
|
|
|
|
m10 x 1.25 throttle cable adjuster for general five star & lazer mopeds
|
|
HERE NOW!!
|
|
|
m10 x 1.25 throttle cable adjuster for lazer and general five star and more!
|
|
|
|
|
|
|
|
|
|
CNC magura BLACK left brake perch for Puch and other mopeds
|
|
HERE NOW!!
|
|
|
newly manufactured cnc two part version of the magura perch original found on puch maxis and many more mopeds. they use magura levers and springs, as well as the puch style plastic start clutch lever or the cnc clutch/starter lever. works with original brake light switches as well. $$ but if ya need it we got it.
|
|
|
|
|
|
|
|
|
|
sachs sparta met motorized bicycle exhaust bracket
|
|
*sorry none today*
|
|
|
new stock replacement two piece exhaust bracket and rubber damper for sachs sparta met motorized bicycles.
|
|
|
|
