|
|
|
|
|
|
honda hobbit pa50 moped DR 46mm 70cc cylinder kit
|
HERE NOW!!
|
|
|
the 70cc 46mm DR kit for honda hobbit pa50 camino express nu50 na50 nc50 and more!
|
|
|
|
|
|
|
|
|
|
honda hobbit BIG BORE SPEED KIT super pack
|
$430.00 alternate reality price $429.99
|
|
|
ADD TO CART TO CHECK STOCK!
skip all the learning mumbo jumbo and slap this BIG BORE JUG and EXPANSION MUFFLER onto your honda hobbit pa50ii (sorry, not pa50i) and you will be going fast, faster than all your friends on their slow scooters. we took all the easiest, quick upgrades to make your hobbit a certified blaster™!
**read the info inside for a quick rundown on how to setup! take your time when installing and break in slowly.
|
|
|
|
|
|
|
|
|
|
honda hobbit 46mm SUPER STREET kit pack with custom cut head
|
$200.00 HAWT deal!! $176.68
|
|
|
ADD TO CART TO CHECK STOCK!
get ready for ultimate RIPPAGE with the honda hobbit 46mm DR kit + the new PUCHONDA 46mm super street head with NO decomp!
no more leaks, higher compression, perfect match. time to step it up!
|
|
|
|
|
|
|
|
|
|
honda hobbit super stuffy race crankshaft
|
|
HERE NOW!!
|
|
|
super strong super stuffy aluminum stuffed needle bearing crankshaft for honda hobbit, camino, PA50 and the like.
be aware that this crank uses a special seal a 17 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
honda hobbit super stuffy race crankshaft PARTY TIME seals ++ bearings
|
|
|
super stuffy crank PARTY TIME with seals and bearings for honda hobbit, camino, PA50 and the like.
|
|
|
|
|
|
|
|
|
|
honda hobbit engine crankshaft seal 15 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
new honda moped crankshaft seal! for so many mopeds it boggles the mind!!
stock seal for hobbit, PA50, NC50, NU50 (R side only), NA50
|
|
|
|
|
|
|
|
|
|
honda hobbit OEM engine crankshaft seal 15 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
new original OEM honda moped crankshaft seal! for so many mopeds it boggles the mind!!
stock seal for hobbit, PA50, NC50, NU50 (R side only), NA50
|
|
|
|
|
|
|
|
|
|
honda hobbit oversize crankshaft seal for performance cranks - 17 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
these are the special oversize honda hobbit, camino, PA50 seals for use with the honda hobbit super strong stuffy crankshaft and later model oem cranks.
17 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
honda hobbit OEM performance crankshaft seal - 17 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
these are the special size OEM honda hobbit, camino, PA50 seals for use with the honda hobbit super strong stuffy crankshaft and the new original honda OEM crankshaft
last of the OEM ones in the world
17 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
crankshaft bearing 6004 C3 for honda hobbit
|
|
HERE NOW!!
|
|
|
fine quality crankshaft bearing for your honda hobbit, camino, pa50, pa50II ..
also for express SR NX50M, urban express NU50 and more!
|
|
|
|
|
|
|
|
|
|
honda hobbit stocko shocko extremo 60.2cc kit
|
|
HERE NOW!!
|
|
|
is this real? yes. prepare to be shocked, and stocked. this kit is black painted cast iron. it's super durable and reliable. porting is simple for a long life of 44mm rippin it up man, man up! if you can handle this. extemo!
|
|
|
|
|
|
|
|
|
|
honda hobbit proma performance pipe PA50 CAMINO PA50II
|
|
HERE NOW!!
|
|
|
raddest pipe ever back from the dead yeahhh ZOMBIE
|
|
|
|
|
|
|
|
|
|
HPI mini rotor cdi box
|
|
HERE NOW!!
|
|
|
HPI mini rotor cdi box, this is for the mini rotor hpi only!
|
|
|
|
|
|
|
|
|
|
HPI replacement 3 pole waterproof connector
|
|
*sorry none today*
|
|
|
waterproof 3 pole HPI connector set!
|
|
|
|
|
|
|
|
|
|
honda hobbit PA50 & express NC50 NA50 engine crankshaft bearings and seals
|
|
|
high quality PA50 and NC50 and NA50 crank bearings and seals
|
|
|
|
|
|
|
|
|
|
honda hobbit athena 47.6mm cylinder kit
|
|
HERE NOW!!
|
|
|
47.6mm! nikasil! largest available for hobbit! 7 ports! wow!
|
|
|
|
|
|
|
|
|
|
copper exhaust gasket for motobecane, honda hobbit, peugeot +
|
|
HERE NOW!!
|
|
|
copper exhaust gasket for honda hobbit, pa 50, camino, peugeot 103, and mbk motobecane 50v 51v av7 av10. and otherssss
30mm OD - 23mm ID
|
|
|
|
|
|
|
|
|
|
POLINI copper exhaust gasket for motobecane, honda hobbit, peugeot +
|
|
HERE NOW!!
|
|
|
POLINI copper exhaust gasket for honda hobbit, pa 50, camino, peugeot 103, and mbk motobecane 50v 51v av7 av10. and otherssss
30mm OD - 23mm ID
|
|
|
|
|
|
|
|
|
|
dual spring rate progressive adjustable shocks with EGOBOOST™ technology- 350mm - 370mm in BLACK
|
|
HERE NOW!!
|
|
|
these 350mm to 370mm shocks are packed with so many features you'll surely tldr the description.
perfecto for magnum n custom builds!
|
|
|
|
|
|
|
|
|
|
dual spring rate progressive adjustable shocks with EGOBOOST™ technology- 290mm - 310mm in CHROME
|
|
HERE NOW!!
|
|
|
these 290mm to 310mm shocks are packed with so many features you'll surely tldr the description.
perfecto for maxi swinger pinto cobra tomos and more more more more more!
|
|
|
|
|
|
|
|
|
|
dual spring rate progressive adjustable shocks with EGOBOOST™ technology- 350mm - 370mm in CHROME
|
$140.00 alternate reality price $110.00
HERE NOW!!
|
|
|
these 350mm to 370mm shocks are packed with so many features you'll surely tldr the description.
perfecto for magnum n custom builds!
|
|
|
|
|
|
|
|
|
|
OEM honda decal - PRESERVE NATURE
|
|
HERE NOW!!
|
|
|
"remember - preserve nature - always wear a helmet -- think safety --"
|
|
|
|
|
|
|
|
|
|
OEM honda decal - NO PASSENGERS
|
|
HERE NOW!!
|
|
|
"warning - operator only - no passengers"
|
|
|
|
|
|
|
|
|
|
OEM honda CAMINO decal - LEFT side
|
|
HERE NOW!!
|
|
|
beautiful silver red n blue color scheme
|
|
|
|
|
|
|
|
|
|
honda hobbit and express headlight lens with REMOVABLE bulbs
|
|
HERE NOW!!
|
|
|
igrajgrrbjua;rr yesss finally a NONsealed beam headlight lamp for honda hobbit nc50 na50 pa50 and others possibly!
uses p15d bulbs!
|
|
|
|
|
|
|
|
|
|
OEM honda decal - EXHAUST system info
|
|
HERE NOW!!
|
|
|
"This Honda exhaust system is a manufactured unit designed to eliminate
excessive noise and give the best performance under normal conditions.
Modification will affect tuning and decrease performance."
|
|
|
|
|
|
|
|
|
|
OEM honda decal - AIR FILTER info
|
|
HERE NOW!!
|
|
|
1 Remove air filter element.
2 Wash aire filter element in clean stoddard solvent and alloy to dry thoroughly.
3 Soak air filter element in clean gear oil (No.80-No.90) until saturated, then squeeze out excess oil.
4 Reinstall air filter element.
|
|
|
|
|
|
|
|
|
|
honda HOBBIT tire party in 17 x 2.25
|
$75.94 alternate reality price $74.99
|
|
|
ADD TO CART TO CHECK STOCK!
every bike needs a tire party!!!!! this one is for honda hobbit. it replaces your stock tires, keeps it lookin original, and they will probably outlast your bike!! okay maybe not but you get it. for spoke wheels and mags as well that are on hobbits with 17" wheels. works with fenders too!
still, though, fits tons of bikes like puch maxi, motobecane 50v, peugeot 103, and well, like hundreds of em! maybe...
TWO TIRES, TWO TUBES, TWO RIM STRIPS!! YUM!!
|
|
|
|
|
|
|
|
|
|
honda MB5 replacement headlight LAMP
|
|
HERE NOW!!
|
|
|
replacement headlight lamp for honda MB5 motorcycles! very cool cause this version has removable bulbs!! not sealed like the original sealed beam ones.
|
|
|
|
|
|
|
|
|
|
honda hobbit 70cc polini kit
|
|
HERE NOW!!
|
|
|
honda hobbit 70cc polini cast iron kit, tons o ports!!
|
|
|
|
|
|
|
|
|
|
85cm speedo cable with big and small ends
|
|
*sorry none today*
|
|
|
85cm speedo with one big and and one small end
smaller end fits in puch / SOME tomos speedometers and drives, larger end fits with transval speedometer parts and some other certain bikes...this cable might solve your problems if you find you need it..
measure measssureee
|
|
|
|
|
|
|
|
|
|
12 volt 35 watt SINGLE filament bulb for honda mb5 lens
|
|
HERE NOW!!
|
|
|
replacement 12v 35w bulb for the non-sealed MB5 headlight lens/lamp thing we sell!
|
|
|
|
|
|
|
|
|
|
honda hobbit autisa 44mm cylinder kit
|
$99.00 alternate reality price $49.99
*sorry none today*
|
|
|
***ON SALE FOR A LIMITED TIME!! MASSIVE DEALS! FUN! GREAT FOR EXPERIMENTING!***
|
|
|
|
|
|
|
|
|
|
honda hobbit italkit 50cc 40mm cast iron kit
|
|
HERE NOW!!
|
|
|
honda hobbit 40mm cast iron dual ringed piston made by italkit, this would be a great replacement for your stock 50cc cylinder! ya know, just in case yours is frozen or seized beyond repair ability..
|
|
|
|
|
|
|
|
|
|
puch maxi chrome LOCKING gas cap + honda hobbit and others
|
|
HERE NOW!!
|
|
|
protect your fuel supply in these desperate times.
|
|
|
|
|
|
|
|
|
|
replacement piston ring - 45mm x 1.5mm - GI
|
|
HERE NOW!!
|
|
|
puch 70cc treat kit + reed kit especiale replacement piston ring. you broke yours? that's ok, we got some here for you. this ring also works on sachs athena 70cc kit
+ puch 45mm airsal, yep also the honda MB5 airsal. and the tomos A35 parmakit. also the motobecane airsal 45mm AV7 and AV88 kits, yes! and now the tomos A35 45mm alukit
45mm x 1.5mm - GI
|
|
|
|
|
|
|
|
|
|
honda hobbit pa50 moped aluminum 46mm 70cc 7 port cylinder kit for wizards only oh ok you can get one too
|
|
*sorry none today*
|
|
|
honda hobbit express camino and such super hi revving aluminum chrome cylinder from rare vintage molds unearthed from the the depths of cavernous tombs of yee old age, super cheap and super ripping.
almost makes me wish I had a hobbit.
|
|
|
|
|
|
|
|
|
|
EBR hydraulic fork leg alluminum cap
|
|
HERE NOW!!
|
|
|
aluminum fork leg cap bolt for all ebr hydraulic forks.. this is a wonderful, amazing upgrade for the ebr hydro forks... the old caps were plastic and nearly impossible to get off, but now! install the new upgraded, designed, manufactered by trEAts haaaaaa!
|
|
|
|
|
|
|
|
|
|
garelli VIP + AMF OMG petcock - back flow - 12mm thread
|
|
HERE NOW!!
|
|
|
OMG petcock perfect for garelli VIP, katia, eureka, gulp, flex and honda hobbit, camino, PA50 and PA50II mopeds + this 12mm size petcock fits one many other mopeds!
fuel flows out the back - for 5mm fuel line
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
|
|
OMG knob petcock - 12mm thread
|
|
HERE NOW!!
|
|
|
this is an OMG petcock made for the piaggio 220 APE MP P 601 and P601Z. it's a knob style cock for use with hi flow 1/4 or 6mm fuel line! wow! put this on any moped that uses 12mm petcocks
for 6mm fuel line
12mm x 1mm female thread coupler nut
|
|
|
|
|
|
|
|
|
|
replacement piston ring - 45mm x 1.5mm - GI - chromed
|
|
HERE NOW!!
|
|
|
puch 70cc treat kit + reed kit especiale replacement piston ring. you broke yours? that's ok, we got some here for you. this ring also works on sachs athena 70cc kit
+ puch 45mm airsal, yep also the honda MB5 airsal. and the tomos A35 parmakit. also the motobecane airsal 45mm AV7 and AV88 kits, yes! and now the tomos A35 45mm alukit
45mm x 1.5mm - GI - chromed
|
|
|
|
|
|
|
|
|
|
honda MB5 COMPLETE 50cc gasket set
|
|
HERE NOW!!
|
|
|
complete 50cc gasket set for honda MB5,MB50, MT50, MTX50, and maybe other similar bikes.
|
|
|
|
|
|
|
|
|
|
black star locking gas cap - 38mm ID
|
|
HERE NOW!!
|
|
|
black star locking gas cap for puch magnum + mb5 + tomos and much more possibly!
|
|
|
|
|
|
|
|
|
|
OEM honda urban express NU50 and gyro TG50 headlight LAMP
|
|
HERE NOW!!
|
|
|
original OEM headlight lamp for honda urban express NU50 & NU50M 1982-1983, gyro TG50 1985 & gyro TG50 S 1986
|
|
|
|
|
|
|
|
|
|
MLM honda express 15mm SHA intake
|
|
*sorry none today*
|
|
|
motion left mopeds 15mm clamp style intake for honda express
|
|
|
|
|
|
|
|
|
|
buzzetti caged headset bearing for puch + peugeot + vespa ++
|
|
HERE NOW!!
|
|
|
buzzetti caged headset bearings for puch, vespa, peugeot, motobecane and maybe more, check first to be sure this is the size you need.
|
|
|
|
|
|
|
|
|
|
malossi RED racing clutch springs for the HAMMER
|
|
HERE NOW!!
|
|
|
for some reason these springs just seem to work on everything
length = 33.9mm
diameter = 10mm
|
|
|
|
|
|
|
|
|
|
honda hobbit 70cc 47mm metrakit kit w/head
|
List Price: $225.00 $199.99
HERE NOW!!
|
|
|
legendary big bore kit now adapted for honda hobbit!!! huge fins, 47mm single ring piston, and that good airsal quality. gotta take some meat outta your case for this one. shut it down at the rally.
|
|
|
|
|
|
|
|
|
|
malossi CHROMED piston ring for many - 47mm x 1.5 - GI
|
|
HERE NOW!!
|
|
|
malossi 47mm x 1.5 GI chromed piston ring for many 47mm malossi cylinder kits.
you can also use this ring in the puch gilardoni 47mm kit and many more i'm sure!!
|
|
|
|
|
|
|
|
|
|
MLM puch ++ hobbit VM18 clamp style intake + PHBG
|
|
HERE NOW!!
|
|
|
motion left mopeds 18mm clamp style intake for puch ++ honda hobbit and a mikuni vm 18mm carburetor!
|
|
|
|
