|
|
|
|
|
|
puch e50 one speed seal set
|
HERE NOW!!
|
|
|
3 seals for rebuilding puch e50 engines.
|
|
|
|
|
|
|
|
|
|
puch E50 one speed complete 4 bearings + 3 seals
|
|
|
complete seals and bearings party for puch E50...heck yeah!
you get:
(3) 6203 C3 bearings
(1) 6203 NR snap ring bearing
(1) 22 x 40 x 7 seal
(2) 17 x 40 x 7 seals
|
|
|
|
|
|
|
|
|
|
puch sears allstate oldtimer seal set - 5pcs
|
|
*sorry none today*
|
|
|
puch sears allstate seal set for oldtimer mopeds like the DS50, MS50, VZ50, M50 and some monza!
should be for 1969 and newer models
|
|
|
|
|
|
|
|
|
|
puch sears allstate oldtimer seal set - 6pcs
|
|
HERE NOW!!
|
|
|
puch sears allstate seal set for oldtimer mopeds like the DS50, MS50, VZ50 and MC50!
should be for 1968 and older models
|
|
|
|
|
|
|
|
|
|
puch E50 one speed crankshaft bearings + seals
|
|
|
crankshaft bearings and complete seal set party for puch E50...heck yeah!
maybe your main gear bearings are fine and ya don't want to change them...if so, this is the party for you!
|
|
|
|
|
|
|
|
|
|
VITON complete seal set for puch E50!!!!
|
|
HERE NOW!!
|
|
|
VITON seal set for rebuilding your puch e50!
you get a set of 3 super high quality seals to help your motor last as long as possible!
|
|
|
|
|
|
|
|
|
|
puch E50 super stuffy crankshaft + seals + bearings PARTY TIME
|
|
|
HERE NOW! super stuffy crankshaft for puch E50 one speed engines. + + +
check within for many bearing and seal options!! we have a party pack that will fit YOUR budget GURANTEED
= RAD TIMES
|
|
|
|
|
|
|
|
|
|
puch e50 STROKER crank + seals + bearings PARTY
|
|
|
HERE NOW! 44mm super stroker crankshaft for puch E50 one speed engines + all 4 bearings + full seal set + 0.5mm base spacer!
everything you need to make a RIPPING stroked e50 setup!! the only other items you may need are some base gaskets to adjust the final squish!! it's as easy as using a standard 43mm stroke crank but ya get more displacement and POWER.
YES, you can use this on ANY E50 setup. fun + entertainment for these miserable times.
|
|
|
|
|
|
|
|
|
|
puch moped crankshaft UNSTUFFED + seals + 2 bearings party
|
|
|
HERE NOW! unstuffed crank WITH seals and 6203 + 6203NR bearings!
party rules
|
|
|
|
|
|
|
|
|
|
honda hobbit engine crankshaft seal 15 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
new honda moped crankshaft seal! for so many bikes it boggles the mind!!
stock seal for hobbit, PA50, NC50, NU50 (R side only), NA50
15 x 25.5 x 7
replaces 91201-147-003, 91201-GW2-000, and many more
|
|
|
|
|
|
|
|
|
|
honda hobbit OEM engine crankshaft seal 15 x 25.5 x 7
|
|
*sorry none today*
|
|
|
new original OEM honda moped crankshaft seal!
this is an
original HONDA made seal for hobbit, camino, PA50i, PA50ii, NC50
express, NA50 express II, NU50 urban express (R side only), NX50 express
SR (R side only), and NCZ50 motocompo!
|
|
|
|
|
|
|
|
|
|
honda hobbit oversize crankshaft seal for performance cranks - 17 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
these are the special oversize honda hobbit, camino, PA50 seals for use with the honda hobbit super strong stuffy crankshaft and later model oem cranks.
17 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
honda hobbit OEM performance crankshaft seal - 17 x 25.5 x 7
|
|
HERE NOW!!
|
|
|
these are the special size OEM honda hobbit, camino, PA50 seals for use with the honda hobbit super strong stuffy crankshaft and the new original honda OEM crankshaft
last of the OEM ones in the world
17 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
honda hobbit deluxe VITON crankshaft seal 15 x 25.5 x 7 - BROWN
|
|
HERE NOW!!
|
|
|
deluxe VITON stock seal for honda hobbit, PA50, NC50, NU50 (R side only), NA50
15 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
honda hobbit oversize VITON crankshaft seal - 17 x 25.5 x 7 - BROWN
|
|
HERE NOW!!
|
|
|
deluxe VITON oversize honda hobbit, camino, PA50 seals for use with the honda hobbit super strong stuffy crankshaft and later model oem cranks.
17 x 25.5 x 7
|
|
|
|
|
|
|
|
|
|
honda NU50 and NX50 and PX50 super STUFFY race crankshaft
|
|
HERE NOW!!
|
|
|
brand new racing crankshaft for honda nu50 urban express and nx50 express SR and PX50!! this crank will fit ALL years of nu50 (1982 to 1983) and nx50 (1981 to 1982) and all PX50 we know of! score! time to build up that metrakitted express sr you have been dreaming about for years....
|
|
|
|
|
|
|
|
|
|
honda NU50 and NX50 and PX50 super stuffy race crank PARTY
|
|
|
HERE NOW! brand new racing crankshaft for honda nu50 urban express and nx50
express SR!! this crank will fit ALL years of nu50 (1982 to 1983) and
nx50 (1981 to 1982)! score!
NEW for 2022 we now know this fits honda PX50!! wow.
complete party with bearings and seals!
|
|
|
|
|
|
|
|
|
|
honda NC50 and NA50 super STUFFY race crank PARTy - early version
|
|
|
HERE NOW! brand new racing crankshaft for honda nc50 express and na50 express 2!!
this crank will fit 1977-1980 nc50 and na50 generally. Measure to be sure!
complete party with bearings and seals!
|
|
|
|
|
|
|
|
|
|
honda NC50 and NA50 super STUFFY race crankshaft - LATE model
|
|
HERE NOW!!
|
|
|
brand new racing crankshaft for LATE model honda nc50 / na50 express!!
this crank will fit 1981 NA50/NC50, 1982 & 1983 NC50!!
|
|
|
|
|
|
|
|
|
|
NOS OEM honda PX50 and NU50 and NX50 crankshaft
|
$355.34 alternate reality price $239.99
HERE NOW!!
|
|
|
NOS OEM honda PX50 and NU50 and NX50 crankshaft.
oem honda part # 13000-197-610 and 13000-187-000
|
|
|
|
|
|
|
|
|
|
puch moped crankshaft UNSTUFFED + seals + 4 bearings party
|
|
|
HERE NOW! unstuffed crank WITH seals and 6203 + 6203NR bearings!
party rules
|
|
|
|
|
|
|
|
|
|
crankshaft bearing 6004 C3 for honda hobbit
|
|
HERE NOW!!
|
|
|
fine quality crankshaft bearing for your honda hobbit, camino, pa50, pa50II ..
also for express SR NX50M, urban express NU50 and more!
|
|
|
|
|
|
|
|
|
|
OEM sym 6004RS bearing
|
$8.99 alternate reality price $5.49
HERE NOW!!
|
|
|
OEM sym sealed 6004rs bearing!!
this is a common crankcase bearing found on 150cc gy6 engines!!
sym part # 96100-60040-00 and 96150-60043-10
|
|
|
|
|
|
|
|
|
|
honda hobbit PA50 express NC50 NA50 crankshaft bearings and seals
|
|
|
honda hobbit pa50 camino + express NC50 & NA50 crank bearings and seals!
note
some 1977 NC50 express use smaller 6203 bearings!! also, some camino
engines use weird bearings as well so be sure to MEASURE before
ordering!
|
|
|
|
|
|
|
|
|
|
puch ZA50 clutch side case bearing - 6002
|
|
HERE NOW!!
|
|
|
this is the bigger of the two bearings that are embedded in the clutch side of the ZA50 case, you know what i'm sayin.
|
|
|
|
|
|
|
|
|
|
puch ZA50 two speed + derbi flat reed input shaft seal 20 x 35 x 7 - double lip
|
|
HERE NOW!!
|
|
|
puch za50 clutch side + derbi flat reed input shaft + final drive shaft seal in suzuki fa50!
|
|
|
|
|
|
|
|
|
|
malossi SNR 6002 C3 bearing for puch ZA50 case clutch side
|
|
HERE NOW!!
|
|
|
this is the bigger of the two bearings that are embedded in the clutch side of the ZA50 case, only this time its the malossi version, you know what i'm sayin.
6002 C3
|
|
|
|
|
|
|
|
|
|
malossi SNR 6005 C3 middle case bearing for puch ZA50
|
|
HERE NOW!!
|
|
|
middle case counter shaft bearing for the puch ZA50 case. ok, got it? only this time its the malossi version, you know what i'm sayin, yeah its better.
6005 C3
|
|
|
|
|
|
|
|
|
|
puch ZA50 main shaft needle bearing
|
|
HERE NOW!!
|
|
|
one of the many many bearings found within the illusive and dark ZA50
replaces puch part # 900.6884
|
|
|
|
|
|
|
|
|
|
VITON seal for puch za50 - 20 x 35 x 7
|
|
HERE NOW!!
|
|
|
VITON seal for puch za50 clutch side
also for derbi flat reed input shaft + final drive shaft seal in suzuki fa50!
|
|
|
|
|
|
|
|
|
|
HK1816 output shaft drawn cup needle bearing
|
|
HERE NOW!!
|
|
|
replacement hk1816 drawn cup needle bearing.
we carry only the finest quality bearings!!! SKF, FAG, INA, NTN etc!!
|
|
|
|
|
|
|
|
|
|
tomos a3 a35 a55 transmission bearing - 6000 c3
|
|
HERE NOW!!
|
|
|
6000 c3 transmission bearing for tomos a3, a35 and a55 engines!!
we carry only SKF, FAG, or NTN bearings!! no bobo garbo here.
|
|
|
|
|
|
|
|
|
|
sealed wheel bearing conversion kit for 32mm hubs
|
|
|
sealed wheel bearing conversion kit for 32mm hubs found on many italian
wheels!! this uses 6002 bearing along with reducer bushings to allow you
to convert your loose ball bearing wheels to 12mm axle sealed bearings
more info INSIDE!
|
|
|
|
|
|
|
|
|
|
sealed wheel bearing conversion kit for 35mm hubs
|
|
|
sealed wheel bearing conversion kit for 35mm hubs!! this uses 6202
bearing along with reducer bushings to allow you to convert your loose
ball bearing wheels to 12mm axle sealed bearings!
more info INSIDE!
|
|
|
|
|
|
|
|
|
|
puch ZA50 2-speed drive output shaft bearing
|
|
*sorry none today*
|
|
|
replacement needle bearing for puch za50 output shafts!!
replaces puch part # 900.6885
|
|
|
|
|
|
|
|
|
|
honda 1977 express NC50 crankshaft bearings and seals
|
|
|
replacement crankshaft bearings and seals for some 1977 honda express NC50!
please be sure to MEASURE before ordering! not all 1977 nc50 models use the smaller 6203 bearings and i suspect that it's only very early production date 77 models that do. ones that use 6203 bearings are pretty rare!
|
|
|
|
|
|
|
|
|
|
NOS puch ZA50 main shaft needle bearing
|
|
HERE NOW!!
|
|
|
new old stock original puch ZA50 main shaft needle bearing!!
made by INA germany
puch part # 900.6884
|
|
|
|
|
|
|
|
|
|
puch E50 one speed crankshaft bearings set 6203 & 6203 NR
|
|
|
one 6203 C3 bearing and one 6203 NR snap ring bearing
|
|
|
|
|
|
|
|
|
|
6203 NR snap ring bearing
|
|
HERE NOW!!
|
|
|
this is the 6203 c3 snap ring bearing required for rebuilding E50 (one speed) engines.
NTN is our brand of choice now!
|
|
|
|
|
|
|
|
|
|
6203 C3 crankshaft bearing for puch e50 + peugeot + derbi + garelli + tomos + solex
|
|
HERE NOW!!
|
|
|
6203 C3 crankshaft bearing for rebuilding e50 (one speed) engines on any puch moped. also one of the bearings for peugeot engines, derbi flat reed and piston port/pyramid reed magneto side!!!!! tomos A35/A55 (OEM #035070), garelli NOI +VIP, morini m1/m01/M02, yamaha QT50 (both sides), puch za50 output shaft and others like solex!!! + nu50 transmission bearing too!
|
|
|
|
|
|
|
|
|
|
puch E50 one speed complete bearings set
|
|
|
three 6203 C3 bearings and one 6203 NR snap ring bearing
|
|
|
|
|
|
|
|
|
|
puch ZA50 + tomos A55 A35 A3 + minarelli V1 + morini - crankshaft seal - 17 x 35 x 7
|
|
HERE NOW!!
|
|
|
crankshaft seal for puch ZA50 (magneto side), tomos a3/a35/A55, minarelli V1 and morini M1/M01
17 x 35 x 7
|
|
|
|
|
|
|
|
|
|
puch ZA50 two speed NSK bearing E20 - brass
|
|
HERE NOW!!
|
|
|
E20 - two part bearing - 20 x 47 x 12 - this is the bigger bearing
brass cage
NSK, not some generic junk
|
|
|
|
|
|
|
|
|
|
puch ZA50 two speed NSK bearing L17 - brass
|
|
HERE NOW!!
|
|
|
L17 for rebuilding puch ZA50 two speed engines plus pre-1986 tomos A3!
17 x 40 x 10
made by NSK japan!!
|
|
|
|
|
|
|
|
|
|
puch e50 one speed seal - 17 x 40 x 7
|
|
HERE NOW!!
|
|
|
one seal for puch E50 one speed eninges - 17 x 40 x 7.
these are also the crankshaft seal for garelli VIP enngines
|
|
|
|
|
|
|
|
|
|
puch e50 one speed seal - 22 x 40 x 7
|
|
HERE NOW!!
|
|
|
one seal for puch E50 one speed eninges - 22 x 40 x 7
|
|
|
|
|
|
|
|
|
|
puch ZA50 middle case bearing - 6005
|
|
HERE NOW!!
|
|
|
middle case counter shaft bearing for the puch ZA50 case. ok, got it?
|
|
|
|
|
|
|
|
|
|
puch ZA50 output shaft seal - 25 x 35 x 7
|
|
HERE NOW!!
|
|
|
output shaft / drive shaft seal for rebuilding puch ZA50 two speed engines.
25 x 35 x 7
|
|
|
|
|
|
|
|
|
|
POLINI puch ZA50 two speed seal 20 x 35 x 7 ++ more!
|
|
HERE NOW!!
|
|
|
they are made of FKM (fluorocarbon rubber) to better resist to the highest termic stress; the seal lip is made of PTFE (polytetrafluoroethylene); this feature makes them a lot more durable than the standard original ones, giving them a smaller friction coefficient thus granting less heat dispersions caused by the friction and at the same time maintaining lower temperatures. these oils seals have been studied with racing engines but equally they perfectly fit on the standard engines that haven't been tuned-up.
|
|
|
|
|
|
|
|
|
|
POLINI puch ZA50 + tomos A55 A35 A3 + minarelli V1 + morini - crankshaft seal - 17 x 35 x 7
|
|
*sorry none today*
|
|
|
they are made of FKM (fluorocarbon rubber) to better resist to the highest termic stress; the seal lip is made of PTFE (polytetrafluoroethylene); this feature makes them a lot more durable than the standard original ones, giving them a smaller friction coefficient thus granting less heat dispersions caused by the friction and at the same time maintaining lower temperatures. these oils seals have been studied with racing engines but equally they perfectly fit on the standard engines that haven't been tuned-up.
|
|
|
|
