|
|
|
|
|
|
pietcard CDI internal coil - 06 - black - bosch ducati - clockwise
|
HERE NOW!!
|
|
|
pietcard CDI . these are interesting CDI's. you put the coil on your stock points stater plate and use your stock points flywheel! this as an electronic converter made to replace the points and condenser.
use this for all mopeds equipped with clockwise small bosch or ducati points ignitions and flywheel - found on some minarelli, sachs 505 and some derbi mopeds and others
|
|
|
|
|
|
|
|
|
|
minarelli V1 complete engine rebuild set
|
|
|
HERE NOW! this is a complete rebuild set for minarelli V1 50cc engines. it comes with all the gaskets (head, base, intake, exhaust, + case gaskets) 4 bearings. 2 6203s and 2 6202s + all 5 seals! three 15 x 24 x 5 seals and two 17 x 35 x 7 seals.
|
|
|
|
|
|
|
|
|
|
pietcard CDI ignition box - 2041
|
|
*sorry none today*
|
|
|
pietcard CDI ignition box - 2041. this CDI box works with the puch e50 cdi unit! and the minarelli cdi unit!
this cdi box auto-retards!
|
|
|
|
|
|
|
|
|
|
pietcard cev minarelli auto retarding CDI stator with cdi box
|
|
HERE NOW!!
|
|
|
auto retarding pietcard stator with coil and cdi box, uses the stock coil and points flywheel! this as an electronic converter made to replace the points and condenser. comes with the 2041 competition CDI box that auto-retards. please be sure you use a resistor plug/cap or you can damage this unit.
|
|
|
|
|
|
|
|
|
|
pietcard external ignition coil
|
|
HERE NOW!!
|
|
|
pietcard ignition coil. this works amazingly with all the pietcard cdi units!!
but of course it will work amazingly with any cdi or points unit you have!!
center to center of mounting holes - 22mm
|
|
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - General 5-Star and 5-Star ST
|
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for honda mopeds including:
- 1978-1983 General 5-Star (model with small hubs)
- 1978-1983 General 5-Star ST (model with small hubs)
**does NOT come with brake springs. you have to use your originals!**
|
|
|
|
|
|
|
|
|
|
treatland's SUPER HIGH QUALITY brake shoe PARTY - LAZER Sport 50 and 50 ST
|
|
|
ADD TO CART TO CHECK STOCK!
the ABSOLUTE FINEST brake pads in the known galaxy, featuring groovy high-tech slots to wick away water, dirt, dust, debris whatever else might get in the way of you and what lies ahead!
for honda mopeds including:
- 1977-1978 Lazer Sport 50 (orange)
- 1977-1978 Lazer Sport 50 ST (blue)
**does NOT come with brake springs. you have to use your originals!**
|
|
|
|
|
|
|
|
|
|
NOS italian 16" spoke rear wheel - 50t sprocket
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
NOS 16" italian rear spoke wheel!! radaelli rim! these fit cimatti and many other italian minarelli / morini powered mopeds.
|
|
|
|
|
|
|
|
|
|
malossi scooter 3 petal carbon fiber reed set
|
|
HERE NOW!!
|
|
|
malossi 3 petal carbonio carbon fiber reeds for many many many many scooters! comes in a set of three different thicknesses for precise tuning techniques.
|
|
|
|
|
|
|
|
|
|
pietcard CDI ignition box - 2072
|
|
HERE NOW!!
|
|
|
pietcard CDI ignition box - 2072. primarily used on lifan engines and other honda clones but also for many scooters like warrior, zanella and possibly many more!
|
|
|
|
|
|
|
|
|
|
garelli NOI & minarelli V1 polini PHBG 19mm intake
|
|
HERE NOW!!
|
|
|
works with polini garelli NOI MATIC kit and minarelli kits.
|
|
|
|
|
|
|
|
|
|
polini minarelli P4 - P6 PHBG 19mm intake
|
|
HERE NOW!!
|
|
|
19mm intake for dellorto PHBG carburetors.
for minarelli p4 p5 p6
mounting holes c-c = 52mm
|
|
|
|
|
|
|
|
|
|
vespa, sachs & solex crankshaft bearing + minarelli counter shaft bearing 6202
|
|
HERE NOW!!
|
|
|
vespa piaggio, sachs and solex moped crankshaft bearing + minarelli V1 counter shaft bearing - 6202 C3
1 of the 2 nu50 transmission bearings too!
|
|
|
|
|
|
|
|
|
|
vespa crankshaft seal, minarelli V1 & morini M1/M01 countershaft seal - 15 x 24 x 5
|
|
HERE NOW!!
|
|
|
the one and only seal you need to seal up a vespa or kinetic engine case around the crankshaft. also used on minarelli V1 engines on the counter shaft and either side of the pedal shaft (3 total) or on morini M1/M01 engines as the countershaft seal. 15 x 24 x 5
|
|
|
|
|
|
|
|
|
|
MALOSSI vespa crankshaft seal, minarelli V1 & morini M1/M01 countershaft seal - 15 x 24 x 5
|
|
HERE NOW!!
|
|
|
Responding to the requests of our exacting customers, Malossi proudly offers a new product line of engine oil seals for MOPEDS, filling a void in the market.
Oil seals with special characteristics, high quality for racing, with low rotational friction and high durability. FKM plus PTFE oil seals boast the highest quality materials and advanced material technology ensuring product quality which is, as always, the driving force and pride behind Malossi.
In presenting this new product to our esteemed enthusiasts, Malossi, in the hope of achieving its desired goal, would like to thank its customer's loyalty to the brand
|
|
|
|
|
|
|
|
|
|
POLINI vespa crankshaft seal, minarelli V1 & morini M1/M01 countershaft seal - 15 x 24 x 5
|
|
*sorry none today*
|
|
|
they are made of FKM (fluorocarbon rubber) to better resist to the highest termic stress; the seal lip is made of PTFE (polytetrafluoroethylene); this feature makes them a lot more durable than the standard original ones, giving them a smaller friction coefficient thus granting less heat dispersions caused by the friction and at the same time maintaining lower temperatures. these oils seals have been studied with racing engines but equally they perfectly fit on the standard engines that haven't been tuned-up.
|
|
|
|
|
|
|
|
|
|
VITON crankshaft seal for vespa and much much more - 15 x 24 x 5
|
|
HERE NOW!!
|
|
|
superior quality VITON 15 x 24 x 5 seal!! for vespa crankshaft, minarelli and morini pedal shaft seal!
|
|
|
|
|
|
|
|
|
|
new old stock SOLO engine
|
$99.99 alternate reality price $79.99
HERE NOW!!
|
|
|
the water sits in the cylinder
perfect stocking stuffer
|
|
|
|
|
|
|
|
|
|
vespa RIGHT side crankshaft seal for oil injected motors - 15 x 28 x 5
|
|
HERE NOW!!
|
|
|
right side crankshaft oil seal for the later oil injected vespa models like ciao mix, grande super duper deluxe, si mix, etc. boss? prolly.
|
|
|
|
|
|
|
|
|
|
NOS solo chrome flywheel COVER
|
|
HERE NOW!!
|
|
|
NOS original chrome flywheel cover for your solo engine!! keep that
bosch ignition safe behind this bad boy! or just use it as a coin tray
like me!
|
|
|
|
|
|
|
|
|
|
viton seal - 15 x 24 x 7
|
|
HERE NOW!!
|
|
|
VITON pedal shaft seals for sachs 505...can also be used as a thiccer replacement for the common 15x24x5 seal.
15 x 24 x 7
|
|
|
|
|
|
|
|
|
|
new old stock SOLO exhaust
|
|
HERE NOW!!
|
|
|
new old stock original SOLO exhaust!! definitely the most technologically advanced exhaust system of any moped ever made.
it's pretty dusty n dirty, but it's new!
|
|
|
|
|
|
|
|
|
|
USED stock SOLO exhaust
|
$69.99 alternate reality price $34.99
HERE NOW!!
|
|
|
USED original SOLO exhaust!! definitely the most technologically advanced exhaust system of any moped ever made.
it's like the one in the photo, but with more dirt n oil on it because it's used!
|
|
|
|
|
|
|
|
|
|
NOS solo plastic drive PULLEY - 11t
|
|
HERE NOW!!
|
|
|
NOS original plastic drive PULLEY for your solo!! this is for the single speed models!
11t drive sprocket!!
solo part # 34-00-142
|
|
|
|
|
|
|
|
|
|
USED solo plastic drive PULLEY - 11t
|
$49.99 alternate reality price $29.99
HERE NOW!!
|
|
|
USED original plastic drive PULLEY for your solo!! this is for the single speed models!
11t drive sprocket!!
solo part # 34-00-142
|
|
|
|
|
|
|
|
|
|
CEV points no wire
|
|
HERE NOW!!
|
|
|
found on some tomos A3, garelli and minarelli mopeds. not A35.
for the cev #6933 magneto SOMETIMES. check and recheck. and then check. and then recheck.
also works on some ducati V1 stators!
|
|
|
|
|
|
|
|
|
|
MLM minarelli V1 piston port intake for mikuni vm20
|
|
HERE NOW!!
|
|
|
MLM minarelli v1 intake for mounting a mikuni vm20 bolt on carb!
|
|
|
|
|
|
|
|
|
|
effe motoplat screw type condenser for many mopeds
|
|
HERE NOW!!
|
|
|
effe motoplat screw type condenser for many mopeds
|
|
|
|
|
|
|
|
|
|
effe CEV solder type condenser with bracket
|
|
HERE NOW!!
|
|
|
effe CEV solder type condenser for many mopeds. this version has a bracket
made in italy
|
|
|
|
|
|
|
|
|
|
effe CEV solder type condenser
|
|
HERE NOW!!
|
|
|
effe CEV solder type condenser for many mopeds.
|
|
|
|
|
|
|
|
|
|
NOS minarelli V1 main gear double D lil castle
|
|
HERE NOW!!
|
|
|
new old stock minarelli V1 collar collar and spring!! just kidding its actually a main gear double D lil castle
|
|
|
|
|
|
|
|
|
|
USED minarelli V1 internal DOUBLE gear
|
|
HERE NOW!!
|
|
|
Used Minarelli internal double gear!!!
|
|
|
|
|
|
|
|
|
|
NOS minarelli V1 internal DOUBLE gear
|
|
HERE NOW!!
|
|
|
NOS Minarelli internal double gear!!! OEM part # 5710
|
|
|
|
|
|
|
|
|
|
used minarelli V1 main gear double D lil castle
|
|
HERE NOW!!
|
|
|
new old stock minarelli V1 collar collar and spring!! just kidding its actually a main gear double D lil castle
|
|
|
|
|
|
|
|
|
|
effe motoplat style solder type condenser with bracket
|
|
HERE NOW!!
|
|
|
effe solder type condenser for motoplat igntions! derbi! yes!
made in italy
|
|
|
|
|
|
|
|
|
|
19mm x 1mm flywheel magneto puller for minarelli CEV + MBK le partie cdi + peugeot malossi cdi +++ moreee
|
|
HERE NOW!!
|
|
|
19mm x 1mm flywheel magneto puller for many different applications like peugeot malossi CDI, the le partie mbk cdi, minarelli CEV, garelli CEV, minarelli AM6, some morini and aprilia RS50 magnetos! plus your new fave.. demm smily!
|
|
|
|
|
|
|
|
|
|
effe ducati solder type condenser for many mopeds
|
|
HERE NOW!!
|
|
|
effe ducati solder type condenser for many mopeds.
|
|
|
|
|
|
|
|
|
|
19mm x 1mm flywheel magneto puller for minarelli CEV + MBK le partie cdi + peugeot malossi cdi +++ moreee
|
|
*sorry none today*
|
|
|
19mm x 1mm flywheel magneto puller for many different applications like peugeot malossi CDI, the le partie mbk cdi, minarelli CEV, garelli CEV, minarelli AM6, some morini and aprilia RS50 magnetos!
|
|
|
|
|
|
|
|
|
|
minarelli v1 + morini + garelli replacement HPI mini rotor stator plate
|
|
HERE NOW!!
|
|
|
replacement minarelli v1 + morini m1, m101, m01 and m02 + garelli NOI stator plate, all by itself just in case you need to replace yours
80mm diameter version!
|
|
|
|
|
|
|
|
|
|
19mm x 1mm flywheel puller - BUZZETTI
|
|
HERE NOW!!
|
|
|
19mm x 1mm flywheel magneto puller for many different applications like peugeot malossi CDI, the le partie mbk cdi, minarelli CEV, garelli CEV, minarelli AM6, some morini and aprilia RS50 magnetos! plus your new fave.. demm smily!
MADE BY BUZZETTI IN ITALY !
|
|
|
|
|
|
|
|
|
|
Motomarina Sebring dealer flyer
|
|
HERE NOW!!
|
|
|
The Sebring!! New ephemera from the catacombs of the kingdom's archives. Preserved for decades and ready to be part of your moped historical document collection!
|
|
|
|
|
|
|
|
|
|
Motomarina Raven dealer flyer
|
|
HERE NOW!!
|
|
|
The Raven!!! New ephemera from the catacombs of the kingdom's archives. Preserved for decades and ready to be part of your moped historical document collection!
|
|
|
|
|
|
|
|
|
|
Motomarina Raven/Sebring brochure
|
|
HERE NOW!!
|
|
|
Fold-out color brochure for the Motomarina Sebring and Raven!
|
|
|
|
|
|
|
|
|
|
malossi intake gasket for puch + minarelli + derbi PP
|
|
HERE NOW!!
|
|
|
round port intake gasket for puch, minarelli and derbi piston port cylinders!
|
|
|
|
|
|
|
|
|
|
CEV points with wire - 6876
|
|
HERE NOW!!
|
|
|
found on some tomos A3, garelli and minarelli mopeds. not A35.
works with all CEV flywheels with the number 6876
|
|
|
|
|
|
|
|
|
|
minarelli + sachs + tomos + garelli style axle chain adjuster - left side
|
|
HERE NOW!!
|
|
|
rear axle / wheel adjuster / drive chain tensioner. minarelli / sachs / tomos / garelli style - left side
also tomos oem # 209212
|
|
|
|
|
|
|
|
|
|
minarelli + sachs + tomos + garelli style axle chain adjuster - right side
|
|
HERE NOW!!
|
|
|
rear axle / wheel adjuster / drive chain tensioner. minarelli / sachs / tomos / garelli style - right side
also tomos part # 231297
|
|
|
|
|
|
|
|
|
|
minarelli V1 complete gasket set
|
|
HERE NOW!!
|
|
|
HERE NOW! this is a complete gasket set for minarelli 2T V1 50cc engines. it comes with all the gaskets - head, base, intake, exhaust, + case gaskets and an o-ring!
similar to the other V1 gasket set we but slightly different this set is a little thicker, you will know which one ya need so order appropriately! thanks!
|
|
|
|
|
|
|
|
|
|
malossi torsion controller for scooter variators & honda NU50 urban express
|
|
HERE NOW!!
|
|
|
malossi torsion controller for sooooooo many scooter variators it boggles the mind..
here's just a few its for - APRILIA, BSV, DERBI, GARELLI, GILERA, HONDA, KYMCO, MALAGUTI, PEUGEOT, PIAGGIO, VESPA....
and hey thanks to the WRECKING CREW we now know this works on NU50 honda urban express too wowowwww
|
|
|
|
|
|
|
|
|
|
effe points for CEV - version 1
|
|
HERE NOW!!
|
|
|
found on some tomos A3, garelli and minarelli mopeds. check within for more info .... made in italy!
Perfect replacement for KTM Foxi with 6949 CEV flywheel
|
|
|
|
