treatland

vespa piaggio CNC'd aluminum reed inducted side case half!!!! - for 46mm cylinders
	$145.00  :*sorry none today* qty:

new aluminum CNC'd vespa piaggio reed inducted side case half!! it has been many moons since the ol simonini side case half disappeared from this world; lucky for us these appeared swaddled in blankets as an offering from the vespa gods. of course, this uses the standard puch/peugeot polini reed block bolt pattern so you can slap a polini 2 petal or malossi 4 petal on there with noo problems! freedom from the tiny 13:13! this one features an oversize bore for use with 46mm+ kits! when running this on a stock case with a malossi full circle crank, you will need to dremel a lil bit of material away to allow proper clearance for the con rod. this setup has been tested and proven as a super ripper!! hmmm i can't remember but im pretty sure you can use this case half with a stock non-full circle crank. seems a lil weird though, i would highly suggest using a full circle crank for optimal performance. note this will NOT work on malossi or polini evolution cases. it will however work on polini speed cases if bored out to match them. also note that there is no transfer cut into this!! this is awesome because you get can match it to the cylinder of your liking for optimal flow and shape. also also note, you will need to cut away a portion of your frame/subframe for the reed block to clear. the aluminum CNC'd racing subframe already has the proper cutout though!! uses normal 6202 open bearings!

  rate this moped part be the first!