NEW EDIT** After comparing with the Tecnigas nsr50 pipe, this pipe was intended for the nsr not the NS50. Read below how to make it work though. ***
I had to use the flange that came with the Tecno Pipe (treats sells these too ^_^) to allow the Turbo Kit pipe to have the right spacing. The mounting bracket that came with this pipe had to be modified to allow the pipe to hang from an engine mounting bolt. Nothing touching after the correct spacing was adapted to the flange mount.
The pipe itself looks to be a high rpm ripper, as the chamber is shorter, and fatter than the Tecno pipe.
I will follow up once I have tested it and compared it to the stock setup.
***EDIT
Tested it with charmo 65 kit - 24 oko - and it is defiantly a higher rpm pipe. It wants to rev to the moon! I need bigger jets though, bog city at wot. Went almost 70 with it , 10mph faster than same bike with tecno pipe.