 |
 |
 |
|
**THIS KIT HAS NO HEAD***
this tomos 70cc 44mm cylinder is designed for A55 tomos engines as found on the late and current model tomos mopeds. It will fit on perfectly and integrate with your existing carburetor, intake, and exhaust, as long as you upjet your carburetor. Be sure to use the 6413 model of dellorto jet with the 6mm thread for the PHVA dellorto found on A55 bikes. There are a few good upgrades to go along with this cylinder - the techno bullet A55 pipe, the technigas next A55 pipe, and the PHVA 17.5mm caruretor, all usually, sometimes, found within the realms of treatland.
this kit is also, if you like, compatible with tomos A35 and puch engines, as the stroke is the same and the bolt pattern is also the same. the intake studs on these cylinders only match the A55 intakes. If you use this on a puch you'll have to mod an intake and a pipe, actually for A35 you'll have to mod a pipe and intake too, as the angles on the cylinder exhaust port is different between a35 and a55..but I have no clue why you would want this over a lil alukitty par T pak.
comes with cylinder, head, piston, cast iron ring, chromed ring, wrist pin, clips, and gaskets.
this head uses a regular bhs spark plug.
01210444
|
|
|
 |
|
 |
|
