puch ducati clone ZA50 CDI stator + magneto

$99.00

:*sorry none today*

qty:

2 wire cdi stator plate and magneto for all puch ZA50 engines, this is a clone version of the famed ducati cdi found on some late edition puch maxi and korado bikes

blue wire goes to your CDI box, yellow wire is 12v lights and should go to your regulator

get a ZA50 cdi box HERE!

this version is also usable on some sachs, derbi, and tomos, as they have the same taper, stator mount and rotation, hackerz enjoy.

ATTN!!! it would be wise to tighten the bolts that hold the coils down before you run this, check em good.

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 1 give your taco rating here

0 taco eaters like this review

Awesome cdi, great lights	February 4, 2013
taco eater : William Caldwell from The southwest corner of treatlanderia

Oh boy this cdi is a blast. Super easy to install and definitely a great points replacement. Two wires off the stator makes it easy as pie to wire.

In currently running this with a matching korado cdi/coil box that we'll have in the store soon! Haven't hit it with a timing light yet, but with the stator plate in the middle, it runs grrrreat on my za. Lights are like brighter than the 12v coil we sell. Awesome!

EDIT: i just checked out my timing with a timing light/micrometer and found that with the stator in the middle position, timing was at about 1.7-1.8mm btdc. perfectooo for e50! i was easily able to get it to 1.6mm which is what za's love. all in all, the timing is super duper on point on these things. rad

Was this review helpful to you?

treatland