motobecane av7 50v speedometer cable 1.9mm ends
motobecane av7 50v speedometer cable 1.9mm ends
 
  $19.99

 :*sorry none today*

qty:

 
 
this moby speedo cable for 50v av7!!! not the other ones, no! no nooooo! but av7 yes!!! 22.4" housing has little protection device for the aid of keeping cable safe

VERY IMPORTANT!!! PLEASE READ!!!


This speedo cable ends measure 1.9 mm square on one end and 1.9 mm square on the other. With 10mm ID end screw caps

Remember to MEASURE your cable BEFORE ordering. If this one doesn't fit it is probably because you need this cable with smaller end tips.

This should also fit most Garelli Huret speedo drives and speedometers. Measure first tho!!!

Please take note that Garelli & MBK Huret speedometers and drives are notorious for using a really bad quality grease during production in the 1970s which at this point in time is now frozen. If you attempt to use a new cable on a frozen drive or speedo it will instantly snap.. so you need to be sure everything else works perfecto and smooth and spins freely or you will be very disappointed when you break your new cable in ohh about 1 second of use.

huret part number 31 0460 444 101

  rate this moped part be the first!