taco eater :
Ryan Nash from Arabi, LA United States
The omega case I received actually needed to be matched to my 50cc MVT kit. It looks like the 50 Doppler kit would work on this. If you want better reeds and intake, this is a very good option.
You will have to remove the top two fins on the cylinder that sit closest to your case.
Stock AV10 case hardware will work but you'll need two longer bolts to fit through the intake part of the case.
Seals are a different size - 15x24x5, so not standard av10 size. It comes with them, but in case you want extras, that's the size.
Was this review helpful to you?
0 taco eaters like this review
Sick, but not for everyone
May 2, 2023
taco eater :
Shane Johnson from Wi, United States
As stated in the other review, there isnt many kits that will match up with this well. I suspect the Bidalot GR1 would be a pretty close match - I will have to look when I have time to compare the two (both on hand). But the transfers in the images look similar. Aside from that, you could maybe use some of that fancy aluminum epoxy (similar to JBweld but better) that the french tuners use, to mold your own transfers. Going to have to be a wizard with a high risk tolerance to make that work.
Was this review helpful to you?
0 taco eaters like this review
Why!!
August 5, 2022
taco eater :
420 666 911 from 666
It’s perfect but the stupid transfers are huge! You can’t just buy an Av10 kit and rip…is sucks!
Maybe the other dudes got something different? 
Why!!