includes cylinder, 10 pin piston, 1mm ring, 10mm wrist pin, clips, exhaust studs, base, head and exhaust gaskets.
6 transfers, 2 auxiliary exhaust ports, and a nice large exhaust port
comes with -
47mm x 1mm GI chromed single ring!!
comes with a 10mm wrist pin piston so just use it on your stock crank or thee
super strong stuffy onecylinder skirt dimensions - 54mm OD, 28mm length
cylinder stud pattern was machined perfectly to fit honda engine stud pattern so it just slides on perfectly!
derbi flat reed and hobbit share the same stroke (40mm) but are inherently different so you might need to space the cylinder slightly with some thinner or thicker base gaskets. get em
here or make your own!
comes in an airsal box
PLZ READ: to mount this cylinder you must disassemble your engine completely and open the cases about 1mm so the cylinder skirt fits perfecto! you will have to trim a very small amount of material off of the fins on the top of the cylinder to clear the cases. the exhaust mount won't be the same so you'll have to make that work, weld on a new header or something clever.... the base and head gaskets will need to be opened up ever so slightly so they match the cylinder stud pattern.