|
soooooo we took a used honda hobbit mag, provided brand new sealed
bearings for you to install, a center bearing spacer, 12mm axle, nuts
and washers, and new brake plate!!!! this now makes what was a hobbit 5
star and front wheel for tons of bikes!!! puch? peugeot? motobecane?
derbi? tons of possibilities here...
plus, as a party pack you get a discount on the parts!! RAD
the rim is 17" x 1.35"
**NOTE** every mag will be slightly different since we have a lot of similar ones here. could be all weirdly painted like the one in the pic or normal white or dirty? but all good condition without damage! maybe chipped paint or a few nicks here and there...i mean, they are old and used so no complainin!!
the wheel will NOT come assembled and might have old bearings in it, so you gotta put it together like the pic! as for dimensions...
the axle is 165mm long, and with spacers:
1) 6.5mm 1) 7.25mm 2) 11.9mm 1) 37mm
basically, it works best with the two 11.9mm and one 7.25mm spacers in the center of the two sealed bearings, and then the 6.5mm spacer in between the brake plate and bearing. the 37mm spacer might be too long for you, but there are a bunch included in the axle party for you to mess around with the best way you like...and we have a bunch more spacers here!!
the front brake plate is new with 90mm brake pads included!!
the brake tab slot is about 45mm from the center of the axle to the top of the slot and 25mm to the bottom of the slot. so if you are planning on using them with a puch, peugeot, and motobecane it will almost always work!! however, just measure the distance on your forks if you are unsure!!
alright, thats it! go get em!!
|
|
|