puch maxi BLACK long EBR disk brake forks

puch maxi BLACK long EBR disk brake forks - TAPERED headset

$349.99

:HERE NOW!!

qty:

new aluminum forged spring loaded EBR front forks with 30mm tubes for puch maxi and more! lil choppery since they are longer + tapered headset conversion bits!

they work perfectly with this OEM tomos caliper.

got to have sealed bearing front wheel for these beauties too

215mm tall head tube with 40mm of thread

for the tapered headset conversion portion of this partyyyy you get:
- 25mm EBR aluminum triple tree / lower yoke (yes, you are also converting to 25mm headset from normal 26mm headset)
- upper and lower headset cups
- tapered headset bearings
- tapered headset bearing seals
- 25mm fork top nut

and some headset washers because this setup requires 3-5mm of spacing under nut!

**please note currently coming with TWO bottom cups with fork lock cut away cause we ran out of top cups.**

threading measures 25mm x 1mm diameter

a little over 26 inches from the axle hole center to top of the tubes

maxi ebr are 23 inches regular magnum ebr are 27 inches ish depts of weights and measurements used three measurin devices to obtain these precise measurements on all these forks be happy

these use a special long axle that goes through the fork legs, this tomos axle .... its perfect for you!!

fork tube diameter is 30mm so when you're picking clip ons make sure you get the right size!

if you need a stabilizer get one HERE!

rate this moped part be the first!

treatland