puch EBR stock maxi clamp conversion upper yoke - CHROME
puch EBR stock maxi clamp conversion upper yoke - CHROME
 



  $12.99

 :*sorry none today*
qty:

 
 
stock puch maxi replacement upper yoke, or use this to convert your maxi forks to accept handlebar clamps allowing you to finally put on cafe bars, low rise bars, chopper bars, twisted chrome jammers, broomsticks, wands, wizard staffs, lanesplitters, cafe roasters, bar hoppers...

the holes are threaded m7 x 1.0, like stock puch

works with the puch handlebar clamps, the one piece handlebar clamp if you drill the holes to m7 or just use really long m6 bolts n nuts, the ebr hydraulic clamps work but are m6 so same deal as the previous

basically the center to center of holes is about 30mm x 60mm apart. fork bolt holes are m8 and triple top is about a 26mm hole. has the hole for the cables to all go through like the original.

these also replace the puch maxi ebr stock maxi forks upper yoke

  rate this moped part be the first!