honda hobbit PS365 pull start setup - WICKED curve / HPI mini rotor

$114.99

qty:

new complete pull start setup for honda hobbit pa50i, pa50ii, camino, etc! this is a simple, robust, budget friendly pull start solution so you can eliminate the starter shoes and maximize CVT performance!

PS365 everyday essentials line featuring yanktech™ technology for blastin' on a budget, 365 days a year!!

HPI mini rotor and WICKED curve version! this will NOT work on your stock hobbit ignition or HPI internal rotor!

the actual pull start recoil unit itself is cast aluminum and can be clocked in 3 different positions depending on what works best for your specific setup!

works on both the OEM hobbit and MLM subframes! we are do not know if these will work on other aftermarket subframes out there.

***note: the additional m8 washers that sit between the aluminum standoffs and the engine case in the example photo are there to represent the thickness of the subframe. original honda subframes are 2.25mm thick and the MLM subframes are 5mm thick. we are including 4 extra m8 washers just in case you need to do some final adjustment on the spacing of the pullstart unit off of the flywheel.***

***installation note: the large washer goes in between the kickstart pawl/pinion and the flywheel nut!***

rate this moped part be the first!

treatland