taco eater :
JOHN from Brownville, ME United States
Got this for my 1978 Batavus Regency will need spacers or shorter bolts for install and if you have stock plastics you will need modify them slightly have enough gap for the intake. I teamed this up with dellorto SHA 15.15 carburetor with cable choke and she runs mint. highly recommend the quality is very well made.
Was this review helpful to you?
1 taco eaters like this review
this setup made my Regency better
June 16, 2020
taco eater :
Jimbo from Franklin , MA United States
great value. I added this and the recommended 15.15 SHA carb. very high quality intake and flange with a good finish coat on it. I cut new gaskets and solved about a million problems I was having with the Dellorto. zero tweaking the bike ran better and now dialed in, it's 34 mph all day long, sings like a song. great product.
Was this review helpful to you?
1 taco eaters like this review
Neat
April 21, 2020
taco eater :
Paul Poore from Mansfield, OH United States
Very cool, I should have read the reviews though. The studs are too long for the intake because the old carburetor was connected through them.
Was this review helpful to you?
1 taco eaters like this review
Good fitment fro Batavus Regency w/ M56
March 6, 2020
taco eater :
Stephen Genuario from Warwick, RI United States
The part fits well, buy one thing that you will have to note is that if you are replacing the old Encarwi, That carb is much thicker than the MLM intake and you will have to get two new, shorter bolts to mount it to the intake port. Hardware store trip! Otherwise, mounts up well and YES the Regency panels fit back in place nicely. Just the carb will peek out of the front chain guard panel. I was worried about that, but it is not a problem. The remaining Reed valve stays in so just clean that up and make sure you buy the proper intake gasket with the hole in the middle to match up to the reed valve port. Runs nice now with the Sha 15:15.
Was this review helpful to you?
1 taco eaters like this review
Awesome on Trac Eagle
May 17, 2019
taco eater :
Dan P from Minnesota, United States
This fit on my Trac Eagle M56 perfectly and allowed me to replace the tired Encarwi H12 with something a lot more serviceable (Dellorto SHA 15.15). I highly recommend it!
Quality when you need it. 
