Return to MLM batavus & trac M56 dellorto 15mm SHA intake
 :
page of 1


  1 taco eaters like this review
 
5 of 5 Quality when you need it. Thursday, April 28, 2022
taco eater : JOHN from Brownville, ME United States  
Got this for my 1978 Batavus Regency will need spacers or shorter bolts for install and if you have stock plastics you will need modify them slightly have enough gap for the intake. I teamed this up with dellorto SHA 15.15 carburetor with cable choke and she runs mint. highly recommend the quality is very well made.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 this setup made my Regency better Tuesday, June 16, 2020
taco eater : Jimbo from Franklin , MA United States  
great value. I added this and the recommended 15.15 SHA carb. very high quality intake and flange with a good finish coat on it. I cut new gaskets and solved about a million problems I was having with the Dellorto. zero tweaking the bike ran better and now dialed in, it's 34 mph all day long, sings like a song. great product.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Neat Tuesday, April 21, 2020
taco eater : Paul Poore from Mansfield, OH United States  
Very cool, I should have read the reviews though. The studs are too long for the intake because the old carburetor was connected through them.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Good fitment fro Batavus Regency w/ M56 Friday, March 6, 2020
taco eater : Stephen Genuario from Warwick, RI United States  
The part fits well, buy one thing that you will have to note is that if you are replacing the old Encarwi, That carb is much thicker than the MLM intake and you will have to get two new, shorter bolts to mount it to the  intake port. Hardware store trip! Otherwise, mounts up well and YES the Regency panels fit back in place nicely. Just the carb will peek out of the front chain guard panel. I was worried about that, but it is not a problem. The remaining Reed valve stays in so just clean that up and make sure you buy the proper intake gasket with the hole in the middle to match up to the reed valve port. Runs nice now with the Sha 15:15.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Awesome on Trac Eagle Friday, May 17, 2019
taco eater : Dan P from Minnesota, United States  
This fit on my Trac Eagle M56 perfectly and allowed me to replace the tired Encarwi H12 with something a lot more serviceable (Dellorto SHA 15.15). I highly recommend it!

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Ice Cold Friday, December 29, 2017
taco eater : Klug from Kingston, PA United States  
Was a bit skeptical on purchasing this and converting my M56 over to a Dellorto since I have't really seen anyone else run one.  

Well, regardless- it works! Intake pipe gets a nice coating of ice, which breaks off and hits my shin- so it's kinda like having A/C.

Need to tune the 15.15 correctly, but it's now much more reliable and maybe this is what will finally make me hit 30mph ;)

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Fits Garelli NOI Wednesday, August 16, 2017
taco eater : Peter Turenne from Chicago, IL United States  
Sold someone a super sport and when he kitted it he made good use of this intake for the 15/15 carb I sold with it. Almost seems like a cold air intake the way the intake gets covered in condensation. Of course it cost some bucks but always a nice touch if you can't fab one. Happy to learn this fit:

Was this review helpful to you?