vespa piaggio olympia rear brake pad
vespa piaggio olympia rear brake pad
 
  $13.00

 :HERE NOW!!
qty:

 
 
the olympia rear brake pad for all vespa piaggio mopeds. i haven't tried this brake pad myself, but from everything else i've seen by olympia, i'm willing to bet this is top quality! vespa mopeds only use one pad in the back hub. does not come with a spring, so you have to use your old spring.

works with all spoke wheels and mag wheels, 16" and 17". for all vespa piaggio mopeds, ciao, grande, bravo, si, boxer, and the rest + kinetic mopeds

taco rating 5 of 5 Total Reviews: 6 give your taco rating here

  2 taco eaters like this review
 
Made for a Vespa Grande!! May 30, 2016
taco eater : Ninja from New York, NY  
If you have a Vespa Grande/Bravo/Ciao with a bad rear brake pad, look no further. This IS the pad you want. The tension spring isn’t fun to get on and off. After getting the spring on the rear brake pad has never stopped the bike so quickly. Zero modification to either the trans/hub and/or the brake pad itself, it simply falls into place.

Was this review helpful to you?

  1 taco eaters like this review
 
Badass for one Pad!!! August 4, 2013
taco eater : big nose from seattle, wa  
This brake pad works so well that one time going down a steep hill going 45 mph I hit a pot hole and caused the back brake to engage and lock up on its own... resulting in a accidental 50ft long rear wheel skid. I can still remember the noise of the skid scaring the crap out of this woman and her daughter who were walking nearby lol

Was this review helpful to you?

  1 taco eaters like this review
 
Nice! June 2, 2013
taco eater : Anonymous Person from Rochester, MI United States  
This was an upgrade larger pad for my 1980 Grande, but not for my 1980 Si.

Was this review helpful to you?

  1 taco eaters like this review
 
Not Too Shabby January 19, 2013
taco eater : Sean Lynch from Tucson, AZ  
Pad face is 15mm wide, compared to 11mm on an original pad. That's about 36% more material to slow your roll with! Didn't fit right on to the brake pin; not a real issue though. Just dressed the pivot hole with an 8mm drill bit and it works perfect now.

Was this review helpful to you?

  1 taco eaters like this review
 
Excellent August 31, 2011
taco eater : Roberto Delatore from Sacramento, CA United States  
Fit perfect did not need to mod on "77 Vespa Bravo

Was this review helpful to you?

View All Customer Reviews