vespa piaggio polini 46mm 70cc kit - 12pin - ciao head

vespa piaggio polini 70cc kit 12pin
 



  $199.99

 :*sorry none today*

qty:

 
 
polini 46mm giant cylinder for vespa piaggio mopeds. can produce 5 and one half horses. that's a lot of horses.

you get head, cylinder, piston, two rings, head gasket, wrist pin, clips n gaskets

this size requires you to grind the case out to fit the sleeve, monstrous

12 pin type with the ciao style 70cc hi comp head

vespa mopeds - bravo, ciao, grande, si, kinetic, tfr...

140.0066

taco rating taco rating 4 of 5 4 of 5 Total Reviews: 2 give your taco rating here

  0 taco eaters like this review
 
5 of 5 won me gold at moped gp east '21 round 2 November 20, 2021
taco eater : jp from Brooklyn, NY United States  
solid cylinder, good quality, did it's job to podium variated class!
I used it with polini speed cases, a 19 PHBG, and a simo calibratatatata. also kinetic cdi, polini var, malossi clutch and bell, stock 10.? to 1 gears

great low end, pulled hard to about 9000 rpm. i cut my own base gasket, used the included head gasket and everything sealed well.

this was all stock cyl and cases, no porting except opening the intake to match the 19 carb. maxed at about 390, held strong through two full weekends of racing and a bit of riding/testing in between. get it!



Was this review helpful to you?

  0 taco eaters like this review
 
3 of 5 warning wont work well on stock cases July 13, 2015
taco eater : moped man from portland , OR United States  
this kit works well on polini cases  the ports will suck air even with silicone on stock cases /to make stock cases work you must weld and bore them / not worth it / cost to weld and bore is more than buying polini cases / if you want reliability /buy there cases / don't be a retard / cause it will cost you a fortune / for a slow hard staring  ped

Was this review helpful to you?