vespa piaggio REAR clutch assembly M24 nut - 0.8mm thread
vespa piaggio REAR clutch assembly M24 nut - 0.8mm thread
 
  $7.99

 :HERE NOW!!

Free Shipping
qty:

 
 
replacement rear clutch assembly nut. this is the one that holds the whooooole thang together. 24mm x 0.80mm threading.

TAKE SERIOUS NOTE - there are two thread pitches used on these... get your thread pitch measurin devices out!!!! So far if I had to say earlier models use .8mm thread pitch and newer (euro) models use 1mm thread pitch... but we don't know for sure. If in doubt measure or buy both.

requires a 32mm socket for the hex!

  rate this moped part be the first!