They did rub the fly wheel. I took a sanding bit on the dremmel to inside of the flywheel. Or you can move the holes on the coil with a dremmel. Either way doesn’t take much for clearance.
Was this review helpful to you?
0 taco eaters like this review
Lighter wheel = more power
August 7, 2021
taco eater :
@Kickstandbois from Detroit, MI United States
I had all sorts of fuckery happening with my dirtped builds ignition. So I got this to replace it. Running polini speed cases, but these coils didn't clear the flywheel.
How to solve! Bust out your dremel, cut the mounting holes in the coils to slots. Extend the holes out towards the edge of the coil. This way when you mount them you can pull them in tighter and they will clear the flywheel. Be careful not to fuck up the coil with your dremel bit! But once you do get them to fit, this ignition is superior to the og US model imo. Lighter flywheel = less rotating mass = more power. Plus you can easily convert this lighting coil to dc to run led lights, like the led flood light used buy Kubota tractors for doing tractor shit in reverse at night. And you definitely need the rubber as suggested, be safe kids, wear a rubber
Don’t get it mixed up 
