universal moped LEXUS clear tail light
universal moped LEXUS clear tail light
 
  $19.99

 :HERE NOW!!

qty:

 
 
if you have a new tomos, or if you are heavy hittter, player, pimpin duder

just like the stock puch and tomos tail lights of yester year, but with drastic improvements, as you can see.

comes with 2 red light bulbs. top one is 12v / 10w and bottom one is 12v / 5w. small style bay15s

additional light bulbs can be found at the party store in the loin

this delux model has three wires protuding and ready to plug in

one threaded bolt with nut and washer in the center for rear fender mounting 10mm M6

+ two more holes on the bottom

for puch & tomos mopeds & most all others.

if you can't mount this on your fender, you might have other problems as well and you'll have to start dreaming.

taco rating taco rating 5 of 5 5 of 5 Total Reviews: 5 give your taco rating here

  1 taco eaters like this review
 
5 of 5 Definitely not stock March 22, 2016
taco eater : Countryboytunning from Princeton , MA United States  
the silver reflector on the inside is plastic instead of medal so you might melt your bulb into the socket making it impossible to replace :/. Black is positive, blue is for fancy brake light setups, and brown is ground. If you want both bulbs for a taillight just marry the blue to the black.


Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Nothing wrong with this July 30, 2013
taco eater : Insaniac from Rowland Heights, CA United States  
It's a plastic tail light, it's like the stock puch but a little different since it doesn't have a red lens. I was surprised with how bright the red bulbs were when I got it working. The two wires are the ground, and the others each go to a bulb. No problems with this.

Was this review helpful to you?

  2 taco eaters like this review
 
5 of 5 More Pictures Please. September 17, 2010
taco eater : Al Gloddy from South Weymouth, MA United States  
Dimension's and more pics containing different angles of each of ur products would help everyone one of your customers out a whole lot. Not to mention you'd have less returns. Constructive criticism. (-:

Was this review helpful to you?

  2 taco eaters like this review
 
5 of 5 OK to convert to 6v May 8, 2010
taco eater : Allen Long from Davis, IL United States  
this'll work OK on your 6volt ride, but you'll need to modify it a bit. For my Sachs Suburban, I had to take out the resistor from my old light(ceramic block soldered in) and wire it in to this one to match. Treat's 6v bulbs will work fine in this, just get transparent red nail polish and paint the bulbs. If you wire it wrong, don't unbolt it; just pop off the clear cover and twist out the bulb sockets, switch em and voila!

Was this review helpful to you?

  2 taco eaters like this review
 
5 of 5 oooooh, aaahhhh April 1, 2010
taco eater : memily from richmond, VA United States  
for when you feel the need to exhibit baller status.
easy to mount, a nice new moped taillight for lookin fancy and braking.
three wires come out of back, one bolt/nut/washer permafixed into the back plastic.  bolt it on and fuhgettaboutit

Was this review helpful to you?