taco eater :
Adam Rogers from versailles, KY United States
only two wires, no connectors included, the adjustable part has been covered so as to prevent me from adjusting. What the hell do, splice into the yellow wire to headlight and other to ground?
Was this review helpful to you?
1 taco eaters like this review
So far so good
October 14, 2019
taco eater :
bigbadbrother from San Jose, CA United States
Be sure to use good connectors and hard mount it so its not shacking around
Was this review helpful to you?
3 taco eaters like this review
Works as expected
July 1, 2019
taco eater :
Jonah Loshnowsky from Peru, IN United States
Spliced in another wire on the yellow one, because the tomos a35 has a 3 prong regulator, then soldered on some connectors. Everything worked great, although i never messed with the adjustable voltage screw. if it ever claps out ill rewrite my review, maybe.
Was this review helpful to you?
1 taco eaters like this review
Nice
June 3, 2019
taco eater :
marc silverstein from bell canyon, CA United States
Works great. For those of you that want to run a battery in order to eliminate lights dimming at idle, use a heavy diode in line to the battery. You will need to change the horn to a DC horn.
Was this review helpful to you?
2 taco eaters like this review
Reliable AC regulator
August 2, 2018
taco eater :
Robbit the Hipper from Hobbitland in Upper Mopedizia
Use this on any non-stock Hobbit to dump AC voltage above the dialed-in setting. Factory setting of 13.8 is fine, especially if rectifying after the regulator for LEDs or other DC accessories.