treatland
basket
lost?
account
instagram
treats flash
contact
tomos n puch complete DISC front end
$629.99
alternate reality price $
579.99
qty:
here's what ya get in this
PARTYYY!
:
2 of
BLK axle spacer - 24.5 x 25.5 x 12mm
($10.00 value!)
1 of
banjo bolt for master cylinders and calipers - 10mm x 1.25mm
($8.99 value!)
2 of
trick for ebr hydraulic disc forks
($6.98 value!)
2 of
flat washers - M8 ($.31)
($0.62 value!)
1 of
navy GRAY disk brake caliper
($19.99 value!)
1 of
M8 hex head bolts - fully threaded - 30mm ($.71)
($0.71 value!)
1 of
M8 hex head bolts - fully threaded - 50mm ($.79)
($0.79 value!)
5 of
M8 hex head bolts - partially threaded - 75mm
($4.25 value!)
5 of
metric LONG COUPLER - M8 - 1.25 ($2.00)
($12.50 value!)
1 of
mike thomas puch five star disk ROTOR only
($59.99 value!)
1 of
mike thomas puch five star hub ONLY - BLACK
($69.99 value!)
1 of
mike thomas puch five star CENTER bearing SPACER - version 2
($7.99 value!)
1 of
puch moped new 17" SILVER five star - RIM only!!
($125.00 value!)
1 of
OEM SYM rear axle - 12mm x 220mm long
($18.99 value!)
5 of
split lock washers - M8 ($.33)
($1.25 value!)
3 of
thick washer for axles - 24mm OD
($2.07 value!)
1 of
tomos & puch SILVER long EBR forks - for disc brake only
($259.99 value!)
2 of
6201 tomos + derbi sealed wheel bearing
($19.98 value!)
1 of
tomos a35 a55 swing arm and/or axle nut - 12mm x 1.25
($1.99 value!)
back by popular demand!
17" genuine grimeca five star mag wheel +
mike t disc conversion
setup!
MAGNUM length EBR silver non-hydraulic forks!
27" long forks = puch magnum and most later tomos length!! these will work on maxi, but you will need to add many headset spacers to account for the longer steerer tube and it'll make it a lil more chopper style.
want a front fender? the
revival front fender
is bolt n go and looks great!
here are some disc brake lines
for you to choose depending on your bar height
we have some
disc brake master cylinders here
for you to choose from.
this master cylinder
or the
tomos master cylinder
are compatible.
does NOT come assembled, so that's your job! however, we will guide you on exactly where the pieces go and where to bolt everything on - along with the pictures above!
the (5) m8 x 75mm bolts, (5) M8 coupler nuts and (5) M8 lock washers are used to attach the rotor and hub to the rim.
the caliper includes a banjo bolt and crush washers (not shown in photos)
follow the links under "
here's what ya get in this
PARTYYY!
:"
for more detailed descriptions on each specific part if you are curious!!
now its time to stop on a dime and ditch those drum brakes!!!!
rate this moped part
be the first!
