puch maxi center kickstand
puch maxi center kickstand
 
  $23.99

 :HERE NOW!!

qty:

 
 
kickstand for puch maxi and all other puch mopeds that use that size kickstand. believe it or not there are actually TWO different maxi stands. It seems E50 and ZA50 use a different stand. who woulda thought it!!!??!? This is the E50 version. As dudes below note, if you have a maxi two speed this stand will not work for you without using a different spring as that is the only difference.

All of these stands are a little thick in the middle if ya know what i mean... easy solution. sand it a little bit and put some heavy grease on before you install the bracket. there ya go!!!

these aren't quite as strong as the originals, so don't go dickin around too much on while your bike is on the center stand. got it?

8 incher

taco rating taco rating 3 of 5 3 of 5 Total Reviews: 9 give your taco rating here

  1 taco eaters like this review
 
1 of 5 Still crap... August 17, 2019
taco eater : Marrok steel from Bonita, CA United States  
Chinese garbage.

Was this review helpful to you?

  1 taco eaters like this review
 
4 of 5 4 tacos because I ate one October 1, 2017
taco eater : Countryobtunning from Princeton , MA United States  
I'm giving it four tacos because well It lasted about 2 seasons before braking one of the stop tabs. Works great after you sand the hell out of it & use grease. Works okay just mad it broke.

Update: this time around I decided not to do any sanding or grinding just lubed_it-up with some jelly. The first few times feel impossible, after a few uses it became lose but still firm and not wobbling around from excessive sanding that could of maybe led to the first one braking.  

Don't sand just install and let in wear in on its on.

Was this review helpful to you?

  0 taco eaters like this review
 
2 of 5 DID NOT FIT!!! January 9, 2016
taco eater : Walter from Honolulu, HI United States  
I have a 1978 Puch MK II Sport 1.5 HP. The center stand spring tab is to high on the stand so the it does not completely go back up. I either have to get a shorter spring or do some cutting with the original one

Was this review helpful to you?

  0 taco eaters like this review
 
4 of 5 Works Pretty Good After Removing Paint! July 31, 2014
taco eater : Alan Blake from Cleveland, OH United States  
Would not pivot once installed. Removed it, sanded all of the paint off the pivot section (and sanded a little bit more for good measure). Bolted it back in, and it now reluctantly pivots. It is tight, but I can swing the stand with my foot - so, it works. As others have stated, it looks good, but is not as heavy duty as a puch original.

Was this review helpful to you?

  1 taco eaters like this review
 
1 of 5 Not cylindrical. March 14, 2014
taco eater : Nikolas Sanow from Portland, OR United States  
even after grinding off the powder coating i couldn't get this sucker to engage after bolting it up. Too bad I can't sell it to anyone to make back my dollars.

Was this review helpful to you?

View All Customer Reviews