puch MAGNUM center kickstand - longer size
puch magnum center kickstand
 
  $23.99

 :HERE NOW!!

qty:

 
 
kickstand for puch magnum and all other puch mopeds that use the longer size kickstand

All of these stands are a little thick in the middle if ya know what i mean... easy solution. sand it a little bit and put some heavy grease on before you install the bracket. there ya go!!!

these aren't quite as strong as the originals, so don't go dickin around too much on while your bike is on the centerstand. got it?


wow, 9.5 inches!

taco rating taco rating 4 of 5 4 of 5 Total Reviews: 9 give your taco rating here

  0 taco eaters like this review
 
5 of 5 Fits Magnum mkII with some fitment work March 16, 2020
taco eater : Beer Bug Free from Hawthorne, NJ United States  
The Part on the whole is a good replacement.  The powder coating is thick so I had to sand it down with an emery strip to get it to function properly.  It doesn't take much, just do a couple test fits between sanding passes.  I brought it down to nearly bright metal for a snug fit that should work smoother with time. Grease it up tighten bolts and good to go.  I did have to shorten my return spring a little. Im not sure if the spring I have is stock. Also wish the stand had a loop mount for the spring and not the grooved peg.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Does the job October 5, 2017
taco eater : Jacob Andrew Dodge from Cromwell, CT United States  
Doesnt quite fit on the e50 motor stock mount. Im currently shaving it down a bit but I LOVE how tall my bike sits now.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Works! October 18, 2015
taco eater : Hank the Gender Queer Toptank from Portland, OR United States  
No troubles on my e50, fits snug

Was this review helpful to you?

  0 taco eaters like this review
 
3 of 5 too big, no biggie though... November 19, 2014
taco eater : Timothy Fuckuson from Lowell, MA United States  
Yeah I bolted it up and it didn't move. Had to sand down the center where it meets the engine case to get it to swing freely. Not too much work, but some work nonetheless.

Was this review helpful to you?

  0 taco eaters like this review
 
4 of 5 Fits fine May 25, 2014
taco eater : Stephen Smith from Happy Valley , OR United States  
Put magnum ebr's on my pinto, this kickstand got me where I needed to keep the bike standing. Fits great, spring is tight though. Gotta kick up the stand to get it to retract.

Was this review helpful to you?

View All Customer Reviews