puch cobra selettra CDI

puch cobra selettra CDI internal rotor ignition system

$250.00

alternate reality price $175.00

:HERE NOW!!

qty:

selettra internal rotor CDI ignition for the puch cobra motorcycle or some other random puch bikes.. not maxi, not magnum.

super discount, use it for whatever ya want! no returns. need spares for your selettra...this is prob cheaper than trying to find a new box & stator! wow, thank you treatland.

no lights on this one!

"The lit electronic or inner rotor digital (red coil) has been studied, developed by our technical and tested in bank of power with diverse motors, until obtaining the maximum power and the curve of lit that better adapts to all the motors, of small cylinders (especially scooters) achieving the moment of inertia but favorable in all the band of turn exceeding in almost two CV the power obtained with a lit normal.

This comes prepared to function until a state of turn of 27,000 revolutions for minute. We recommend to mount it without keep in mind the chaveta should penetrate it with an advance of 18 degrees of 1.40 millimetres before the upper break-even point (PMS)

This lit can be mounted in any motor, whether with turn in sense of the needles of the clock (right) or with turn contrary sense to the needles of the clock (left), keeping in mind that for the assembly in a motor with turn to right, we will keep in mind you mark them or the rotor, pertaining to the arrow with sense equal to the needles of the clock (right), of the way top coincide marks it but cuts of green colour with it marks unique that is in the stator, all this with the piston in the upper break-even point.

For the assembly in a motor with turn left, will keep in mind you mark them of the rotor that they are next to the arrow that looks in contrary sense to the needles of the clock (left), so that we will return to do to coincide marks it but cuts of green colour with it marks unique that is in the stator, with the piston situated in the upper break-even point. In both cases, the advance indicated with it marks but long of red colour, is the recommended by our technical for this type of motors.

The cable with red case comes prepared to connect it to the button of stopping."

taper size - large end approx 19mm, small end approx 15.75mm

NO RETURNS!!!!

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 1 give your taco rating here

0 taco eaters like this review

now I see...	March 23, 2012
taco eater : Morgan Aguayo from Oberlin, OH United States

'keeping in mind that for the assembly in a motor with turn to right, we will keep in mind you mark them or the rotor, pertaining to the arrow with sense equal to the needles of the clock (right), of the way top coincide marks it but cuts of green colour with it marks unique that is in the stator'

...MHM SOUNDS GOOD TO ME.

Was this review helpful to you?