New!  motobecane AV7 malossi SHA shorty intake
motobecane 15mm SHA dellorto intake
 
  $26.99

 :HERE NOW!!

Free Shipping
qty:

 
 
malossi shorty intake for using on av7 (50v) and av88 engines to replace the stock gurtner with a dellorto sha carburator.

either the 15mm or 16mm dellorto will work great with this intake.

just imagine being able to change your jets! wow! revolutionary!

check the reviews below for more info, on some av7 cylinders you need to slightly file the fins or intake down to get a perfect seal, sorry!!

ID = 15mm
OD = 19mm

02 2066B

taco rating taco rating 4 of 5 4 of 5 Total Reviews: 13 give your taco rating here

  0 taco eaters like this review
 
1 of 5 is it just me? Sunday, July 26, 2026
taco eater : Steve Pamboukes from Portsmouth, NH United States  
I dunno.  Put a dellorto SHA 14.12 or 15.15 on this.  Tighten that clamp screw all the way.  Carb shakes off in less than a couple miles.  Is it just me?  Maybe its the carb.  Maybe its the shim.  Maybe its the intake. All I know is when I use all the "right" parts, shit still shakes off in less than a mile.. ready to have some fun on my basic stock Motobecane but this is not allowed with this combination of parts...?

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 turns ped into racing ped Monday, June 8, 2026
taco eater : Dillon O'Dea from Northridge, CA United States  
Installed easy only needed to shave the top of the intake down a little bit to clear, took like a minute or 2 with a regular file. everything fit well no air leaks and the port is bigger so more airflow and intake sound is louder.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Have to file top to fit stock cylinder Sunday, July 6, 2025
taco eater : Beach Club Nick from Columbus, OH United States  
Works great, just have to file the top of the intake to not hit a fin and bind on the stock cylinder. I used a corded angle grinder and took way more off than was needed after 10 seconds of grinding.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 it works Tuesday, April 27, 2021
taco eater : burrito eater from SIOUX FALLS, SD United States  
works good with the dellerto 15. have to shim it down for this carb to fit on this but it works. little modifications to this to fit the express nc50. If you've never held a screw driver before, this isn't for you. I had to elongate the holes a bit, then had to dremel the bottom right side to clear the fender mount that is attached at the intake. worked awesome and have no leakage.

Was this review helpful to you?

  0 taco eaters like this review
 
4 of 5 Good intake Thursday, May 31, 2018
taco eater : Michael Malvo from Kirtland, OH United States  
Had to shave the intake for it to line up perfectly. It took 2 seconds with a file.

Was this review helpful to you?

View All Customer Reviews