polini CP carb curved air box - 48mm ID

polini CP carb curved air box - 48mm ID
 



  $24.99

 :HERE NOW!!
qty:

 
 
polini air box for the CP series carburetors! fits any carb with a 48mm air filter mount diameter or if you remove the plastic adapter it will fit a 62mm air filter mount.

physically quite large; approximately 3.75in deep x 4.5in wide x 5in tall.

this air box has no filter element, so it should flow quite nicely. it's also got a nice velocity building curvature to it...mmmm.

203.0014

taco rating taco rating 4.5 of 5 4.5 of 5 Total Reviews: 3 give your taco rating here

  1 taco eaters like this review
 
4 of 5 46mm ID February 20, 2019
taco eater : Dillon Ryan from Brooklyn  
Nice airbox, but ID is definitely closer to 46mm as mentioned in the other reviews. Will no fit on an OKO/Polini PWK without hogging out the opening.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Really quiets things down December 11, 2018
taco eater : Magic from Seattle, WA United States  
Love this airbox, works perfect on a polini cp with the included spacer. Catches all that nasty blowback so you dont reek like fuel and also has a nice whistle to it in the mid range. Very good quality, it got ran over by a car and came right back to life without cracking. The little plugs are removable so you can tune the amount of flow or silencing. Thanks again to treats for stocking superior. products.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Awesome September 25, 2015
taco eater : Jay Bolosan from Kailua, HI United States  
Put it on my PWK on my magnum, super sweet sound. Grommet is actually 46mm but used radiator hose with 48mm opening fits nice. Box is made of ABS plastic so no flex to it, had to slice in some cuts so it would clamp better onto carb.

Was this review helpful to you?