peugeot & hobbit & bravo & mbk EBR black hydraulic forks - 26mm head tube
peugeot & hobbit & bravo & mbk EBR black hydraulic forks - 26mm head tube
 



  $260.00

 :HERE NOW!!
qty:

 
 
!!!! news flash ebr hydraulic forks now have metal caps so they are soooo much easier to remove so you can change the oil and mess around with suspension settings, yeaaaaaa !!!

ok these are EBR hydraulic forks you can use these on an number of different mopeds. the important measurement is the head tube length. in this case 220mm. and the triple tree top plate thickness of 28mm. the other important thing is that these forks have the puch size 26mm head tube threading. so when you want to put them on other mopeds you need to have a some puch headset stuff. like the top thread on race found this set. and you will want a puch fork nut

so you can use these on honda hobbit, peugeot, vespa bravo, motobecane and many others.

**take measurements of you mopeds headset length before you buy. make sure you have enough room and that the head tube will be long enough or short enough. also remember to add the thickness of the triple tree top plate.**

ESPECIALE FOR TREEEEEATSSSSSSSSSLANDERIA

this version features cast aluminum alloy (triple tree & legs) vs. pressed steel as found in the original ebr edition

mounting holes for disc brake caliper OR drum brake. use sealed or loose bearing axles of course.

head tube threading = 26mm x 1mm puch size

220mm tall head tube with 60mm of thread.

triple tree top plate thickness = 28mm

this version approx 24" long and 15" from the bottom of the triple tree to the end

the caliper mount is 60mm from eyelet to eyelet and also slightly off set - the top mount sticks out 5mm more than the bottom. however, sometimes ebr sends us ones that do not have this offset and they stick out at the exact same distance! gotta space it all no matter what!

fork tube diameter is 28mm so when you're picking clip ons make sure you get the right size!

taco rating 5 of 5 Total Reviews: 4 give your taco rating here

  0 taco eaters like this review
 
So dope July 6, 2017
taco eater : Conan Evans from West Linn, OR United States  
They look and ride amazing. Also if youre wondering 25mm headset nuts are a no go buy the 26mm. #pleasereadfineprintbeforeorderingsomethingwhenyouredrunk

Was this review helpful to you?

  0 taco eaters like this review
 
Got A3 spoked drum brakes? March 15, 2016
taco eater : micahel rhatigan from brooklyn, NY United States  
Order the A3 spoked rear axle and some spacers will work fine, you are gonna have to figure something out for the drum brake flange as it is not in a good spot for these wheels gonna have to some sort of mod

Was this review helpful to you?

  0 taco eaters like this review
 
NIIIIIIICE! September 18, 2012
taco eater : Gary Cravens from Lynnwood, WA United States  
super solid forks. had to run a spacer to get the puch nut to fit on my moby. no problem. they look awesome!

Was this review helpful to you?

  2 taco eaters like this review
 
sicckkkk July 11, 2012
taco eater : Scott Cerveny from Owosso, MI United States  
veryyyyy good forks. buy the top nut they tell you to get and the only thing i had to do to run on my hobbit was put a spacer under the top triple. and get a longer axle. very very very happy with these.

Was this review helpful to you?