peugeot 103 70cc 47mm metrakit w/ UNCUT head
peugeot 103 70cc 47mm metrkit with head
 



  $169.99
alternate reality price $125.99

qty:



here's what ya get in this PARTYYY!:

 
 
***NEW BATCH for 2019!! these come with UNCUT NON DECOMP heads!! now ya dont have to scour the corners of the net to find a derbi decomp valve!! but you do have to cut the head yourself or have it cut!!!! that's why they are a deal!!!!***

😍

cute!

if you want the custom cut heads, which will mount right up and give you the extra compression and correct dome size you need for blasting. you'll want this kit instead!!!!


ATTENTIONE! we now have the peugeot 70cc metrakit BASE SPACER for spacing this kit out properly!! YEAH!

peugeot 103, tsa, tsm metrakit 47mm 70cc nikasil aluminum cylinder kit with head!

includes head, intake, cylinder, 12 pin piston, 1mm ring, wrist pin, clips, exhaust studs, head, base and exhaust gaskets

6 transfers, 2 auxiliary exhaust ports, and a nice large exhaust port

comes with - 47mm x 1mm GI chromed single ring!!

the head does NOT come with a decomp valve. this is a DERBI kit adapter to peugeot so you cannot use the original peugeot decomp valve, you must source a stock DERBI decomp valve!

cylinder skirt dimensions - 54mm OD, 28mm length

cylinder stud pattern was machined perfectly to fit peugeot 103 engines so it just slides on and fits!

derbi flat reed and peugeot share the same stroke (40mm) but are inherently different so you will need to space the cylinder with an aluminum spacer and some gaskets

comes in an airsal box

PLZ READ: to mount this cylinder you must disassemble your engine completely and open the cases so the cylinder skirt fits perfecto! you will have to dremel the fins on the top side so it fits your cases, as shown in the photo. the exhaust mount won't be the same so you'll have to make that work, weld on a new header or something clever.... you will also have to make a spacer so the cylinder fits perfectly allowing the piston to open and close. the base and head gaskets will need to be opened up ever so slightly so they match the cylinder stud pattern.

  rate this moped part be the first!