 |
 |
 |
|
this is for the peugeot metra kit cylinder ONLY! no head comes with this one.
ATTENTIONE! we now have the peugeot 70cc metrakit BASE SPACER for spacing this kit out properly!! YEAH!
peugeot 103, tsa, tsm metrakit 47mm 70cc nikasil aluminum cylinder kit with head!
includes cylinder, 12 pin piston, 1mm ring, wrist pin, clips, exhaust studs, head, base and exhaust gaskets
you'll want to get spacers here & gaskets here.
6 transfers, 2 auxiliary exhaust ports, and a nice large exhaust port
comes with - 47mm x 1mm GI chromed single ring!!
cylinder skirt dimensions - 54mm OD, 28mm length
cylinder stud pattern was machined perfectly to fit peugeot 103 engines so it just slides on and fits!
derbi flat reed and peugeot share the same stroke (40mm) but are inherently different so you will need to space the cylinder with an aluminum spacer and some gaskets. get them spacers here & gaskets here.
comes in an airsal box
PLZ READ: to mount this cylinder you must disassemble your engine completely and open the cases so the cylinder skirt fits perfecto! you will have to dremel the fins on the top side so it fits your cases, as shown in the photo. the exhaust mount won't be the same so you'll have to make that work, weld on a new header or something clever.... you will also have to make a spacer so the cylinder fits perfectly allowing the piston to open and close. the base and head gaskets will need to be opened up ever so slightly so they match the cylinder stud pattern.
|
|
|
 |
|
 |
|
