motobecane HURET speedometer cable - 178360
motobecane HURET speedometer cable - 178360
 
  $42.99

 :HERE NOW!!

qty:

 
 
new old stock original HURET speedometer cable!!

VERY IMPORTANT!!! PLEASE READ!!!

note these cables are new, but have been sitting around for decades. they should be cleaned and re-lubed before use!! there is some discoloration on the housing and light rust on the tips.

This speedo cable ends measure 2.7mm square on one end and 2.7mm square on the other. With 10mm ID end screw caps

565mm outer length
590mm inner length

Remember to MEASURE your cable BEFORE ordering. If this one doesn't fit it is probably because you need this cable with smaller end tips.

Please take note that Garelli & MBK Huret speedometers and drives are notorious for using a really bad quality grease during production in the 1970s which at this point in time is now frozen. If you attempt to use a new cable on a frozen drive or speedo it will instantly snap.. so you need to be sure everything else works perfecto and smooth and spins freely or you will be very disappointed when you break your new cable in ohh about 1 second of use.

  rate this moped part be the first!