indian AMI-50 front MIRA mag disc hub

$14.99

:HERE NOW!!

qty:

Due to a happy accident we now have a whole gang of these very cool Mira Mag wheel front disc hubs!! What an exciting opportunity to upgrade that rare mag so you can actually stop!! Or maybe you're very crafty and you can machine this to fit some other oddities... for that price why wouldn't you try??

You will need to drill out four mounting holes on your mag in order to mount this hub

hub body is about 76mm wide, the section that sits inside the wheel is about 52mm wide
OD of mating surface is about 107mm
OD of the section that sits inside the wheel is about 96mm

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 1 give your taco rating here

0 taco eaters like this review

Ain't no drummer boi	January 1, 2026
taco eater : Shawn Hammons from Plattsmouth, NE United States

Fits snug and I had to remove some flashing from the old mag I used. Drill your 4 holes and countersink them for clearance. I used M8x1.25x20 for the rotor and M8x1.25x25 for the hub to the mag. I believe I have to remove the brake tab from the fork leg also.

Was this review helpful to you?

treatland