treatland

honda urban express nu50 DR kit BIG BORE party - level 2
	$531.99 qty: here's what ya get in this PARTYYY!: 1 of the 2nd smallest knarp we carry ($1.50 value!) 1 of honda hobbit pa50 custom cut 46mm head - super street ($59.99 value!) 1 of dellorto SHA 15.15 carburetor with lever choke - 1.5 shim for tomos ($69.99 value!) 1 of dellorto SHA 1mm carburetor shim for puch mopeds + ($5.50 value!) 2 of moped M6 x 30mm CHROME exhaust or intake stud in GOLD ($3.98 value!) 4 of flat washers - M6 ($.27) ($1.08 value!) 1 of honda hobbit pa50 moped DR 46mm 70cc cylinder kit ($140.00 value!) 4 of metric nuts - M6 - 1.0 ($.20) ($0.60 value!) 1 of MLM honda urban express NU50 15mm SHA intake ($50.00 value!) 1 of MLM honda urban express NU50 next level STOCK pipe ($179.99 value!) 2 of M6 (10mm) LONG brass exhaust nut ($4.50 value!) 1 of what throttle cable do i need??? ($16.99 value!)

honda urban express nu50 big bore party pack with pretty much all the stuff you need! comes with a 70cc DR kit, custom cut head, dellorto 15 sha carburetor, MLM intake and an MLM next level stock pipe! level 2, so this setup is perfect for gaining even MORE top speed and torque, but still having a quiet-ish bike that isn't over stressed. make sure you USE THE RIGHT SHIM. it comes with a 1.5mm shim inside the carb and an extra 1mm shim with it. use the 1mm shim!!!!!! take the thicker one out and put the thinner one in so it fits on the intake!! you will need to change your main jet in the carb so grab some main jets here!!! 70s-80s+ or even higher!! always start with a high number jet and work your way down!!!!! your original throttle cable WILL NOT WORK with this carburetor. what do you do?!?! hence it comes with a new throttle cable!! now's the time to replace those crappy stock metal reeds with some performance reeds while you're in there! also comes with some exhaust studs, nuts and washers!! yup!

  rate this moped part be the first!