What Ari said concerning the seals is accurate. Additionally, this set comes with all seals you will need to replace. If you buy a heavily used MB5, oil seal replacement is necessary.
Was this review helpful to you?
3 taco eaters like this review
Ari the MB5 mechanic
September 10, 2012
taco eater :
Ari Henning from El Segundo, CA United States
The previous reviewer must have got a bad set. I've bought several and they have everything you need, even the little tach drive seal that you never really need to replace. Purchase with confidence, and be careful pressing the seals in; grease the outside and press them in evenly with an appropriately sized socket. For clarification, the right side seal is supposed to be pressed in 9mm from the lip of the crankcase boss (according to Honda manual) and the big-ass right side seal presses in so the outer (flat) side of the seal faces the inside of the bottom end. Make sense? Now you're rocking an air-tight engine.
Was this review helpful to you?
0 taco eaters like this review
Great, but needs a 28x56x8 seal too!
March 10, 2011
taco eater :
Furdy Durdy from Honda MB5land
Good seals, but it didn't come with the critical 28x56x8 seal, and I ain't gunna reuse the old one. Gotta call Honda tomorrow.
Just what I needed! 
Great, but needs a 28x56x8 seal too!