honda hobbit YELLOW rear pulley contra spring - stiffer version
honda hobbit YELLOW rear pulley contra spring - stiffer version


contra YELLOW hi tension rear pulley contra spring for honda mopeds - hobbit, pa50, pa50II!

the YELLOW spring is 69mm tall and stiffer than stock but not as stiff as the red version!

these definitely don't fit the camino/euro rear pulley

taco rating taco rating 5 of 5 5 of 5 Total Reviews: 1 give your taco rating here

  2 taco eaters like this review
5 of 5 Tuned hobbits need this ! October 19, 2017
taco eater : Lab rat 75cc from Fresno, CA United States  
This transformed my very ported DR kit ( 185 exhaust @ 70% of the piston diameter) 19mm delO, carbon reed on modified stock cage , debi Head machined to 46mm , proma circuit pipe w/ extended stinger, Hpi CDi, malossi red springs in the clutch with vented bell , push start set up , bX40 belt ( because all other bells s won’t last!) stuffy Treat race crank , 2.75 gazelle. ( the 2.75 is a taller tire so it works like a slight overdrive)

I had a fatal mid range range rpm drop that would eventually pick back up . After the yellow spring and going 17.8 gr to 17.4gr on the tjt it powers right through the mid -dip and pulls hard all the way to 55mph . It pulls wheelies and launches 🚀! For the street and everyday riding it’s a solid build ! Next I will be testing the red spring !!
Thank you Treats for bringing the best part of mopeds , “performance “!

Was this review helpful to you?