garelli brn 44.5mm custom cut head for MALOSSI kit
garelli brn 44.5mm custom cut head for MALOSSI kit
 



  $85.99

 :*sorry none today*

qty:

 
 
custom cut squish head specifically designed for the garelli NOI malossi kit!!!

these heads have been turned to clean up and re-profile the squish better performance than the stock BRN head! oh yeah, way larger = way more fins = way chilly head temps.

inner lip where head gasket fits = 56mm

head itself is 140mm L x 120mm W x 49mm H

works with the gasket that comes with the garelli malossi noi kit, but you can also use these head gaskets!

uses short thread spark plugs

taco rating taco rating 4 of 5 4 of 5 Total Reviews: 1 give your taco rating here

  1 taco eaters like this review
 
4 of 5 Still feels disgusting. November 3, 2017
taco eater : Alan from Washington, DC United States  
a well cut head. Mine had a lot of minor casting flaws in the metal post-milling where the head gasket goes but who cares cause there's a gasket there. seals real good either way.

The spark plug hole on this bad boy is recessed so it needs to be modified if you are going to try to accurately run a head temp sensor.

Update: Took the head off once and then the piston started hitting the head and spark plug. Added another head gasket (for polini NOI, worked fine) and kept the ring that comes on the plug while still using the temp sensor. Is good now.

51mph on a Garelli Basic.

Was this review helpful to you?