front disc brake lever assembly with dual piston caliper
front disc brake cofront disc brake assemblyntrol
 
  $59.99

 :*sorry none today*

qty:

 
 
black n silver front disc brake lever assembly with dual piston caliper and cables. use this for custom front disc brake set ups. this is a pretty rad disc brake set up for the price! lever assembly comes with brake light button and wires!

this brake assembly has a dual piston caliper which is much stronger than a single and comes with a bracket and an external reservoir for something special i'm sure!!

the bracket on this one measures - 84mm eye to eye on bracket

45" long brake hose

get a set of replacement brake pads HERE!

taco rating taco rating 5 of 5 5 of 5 Total Reviews: 1 give your taco rating here

  1 taco eaters like this review
 
5 of 5 Great braking power, but set it up right! August 28, 2015
taco eater : Shane Johnson from Hudson, WI United States  
This is essentially the same exact caliper setup I use to race with on my Moby. I used the Mike Thomas 220mm disc you can buy here at Treats, and used plated aluminum for the bracket. Seems to be strong enough, and easier to drill and cut. If you are going to run this caliper setup, remove the ABS module. Many claim they can fail (its Chinese duh) or cause lackluster/intermittent performance. You can remove the hose from the valve, and just bolt the banjo into the caliper body without the valve module. The ABS function is basically just a pressure valve. After so much pressure it opens up to avoid overbraking. I have raced on it without the ABS and it works perfect. Bench/vise bleed it whether you remove the valve body module or not, but especially if you do.

Was this review helpful to you?