taco eater :
Brandon Weiss from brooklyn, NY United States
This thing is great! It really helps cut back on harsh intake noise. Also, your setup will live longer and no gas on your leg! It has one internal snorkel, and an extra one that you can install by punching out the second hole for some extra airflow if you need it. A 45mm puch airsal kit with a big Crank's pipe and a 19phbg needed the second snorkel, didn't flow enough without it. The rubber mount is stepped and has 2 diameters. Unmodified, the opening is perfect for PHVA and other 35mm carbs. To mount on a naked PHBG, the instructions tell you to cut off the outer step, and then the smaller inner diameter fits. But if you don't want to cut into your $30 filter, grab a 36mm screw on adapter for PHBG and it will pop right on.
The inner diameter is just slightly too big for Mikuni VM18. The rubber is quite thick and stiff, so cranking down on the hose clamp might not be enough. Maybe shim the carb mouth a little bigger, or 3D print a 35mm collar to mount onto the carb mouth
Was this review helpful to you?
0 taco eaters like this review
Quiet !
September 23, 2018
taco eater :
Wubba lubba dub dub from MI United States
Is a little big for a phbg, guess it’ll tighten down enough to work but make sure you wire it to something or zip tie it because it’s very big and awkward but it does a great job of quieting Down the crazy loud reverberation that comes back through the carb.
Was this review helpful to you?
0 taco eaters like this review
monster sized
July 2, 2013
taco eater :
Dennis VanScoik from centreville , MI United States
Just recieved yesterday and This thing is absolutely massive, be warned that u need tons of room to use this. Seems like a well built product tho
Was this review helpful to you?
4 taco eaters like this review
Any Feedback for this Air filter would be Awesome!
August 18, 2010
taco eater :
Al Gloddy from South Weymouth, MA United States
I'm sorry that i've posted a question in the review section Treatland, it's just that I'm caught in between the purchase of this air filter ot the K&N for PHGB's (Dellorto 19 CS in my case.) Thanks for any responses if there are any lol. Please feel free to erase this post TL, if you don't feel it to be necessary. Thanks.