dellorto PHBL 24mm AD carburetor

24mm PHBL AD dellorto clamp style carburetor. this carb uses 6mm dell jets for the main jets and PHBG main jets (1486) for the idle jets! what a world! starter jet and needle valve we don't carry yet. soon enough we will though! other than that this carb has an 8mm fuel inlet, 2 breather vents, one 14mm bolt that holds the float bowl in place. this is really cool the 14mm bolt also holds the jet!

pull style choke
controls on right side of carb

60 idle jet
100 main jet
D22 needle
40 slide

28.5mm spigot ID

38mm screw type air filter mount

treatland