cnc rotary disc side case half - BLUE - 3 stud 50mm bore
cnc rotary disc side case half - BLUE - 3 stud 50mm bore
 
  $188.00

 :*sorry none today*

qty:

 
 
new aluminum CNC'd vespa piaggio ROTARY DISC side case half!!! crazy!! take that slow vespa to the next level with this mindbogglingly advanced spinning disc technology.

WARNING!!! this is for gurus / masters ONLY. that's right. this will require countless hours of preparation and fitment to get it right. you must pass a test before purchasing this.

BLUE is for your standard big boy vespa kits. 50mm bore with the standard 3 stud vespa pattern will work on stock cases (bored to 50mm of course) and polini SPEEDengine!!! make the most out of your 47mm DEPS or 46mm pinasco! will NOT work with malossi or polini evo reed cases.

when running this on a stock case with a malossi full circle crank, you may need to dremel a lil bit of material away to allow proper clearance for the con rod. this setup has been tested and proven as a super ripper!! hmmm i can't remember but im pretty sure you can use this case half with a stock non-full circle crank. seems a lil weird though, i would highly suggest using a full circle crank for optimal performance.

note this will NOT work on malossi or polini evolution cases. it will however work on polini speed cases if boBLUE out to match them.

also note that there is no transfer cut into this!! this is awesome because you get can match it to the cylinder of your liking for optimal flow and shape.

also also note, you will need to cut away a portion of your frame/subframe for the reed block to clear. the aluminum CNC'd racing subframe already has the proper cutout though!!

intake bolt hole spacing = 48mm
intake opening = 21mm
case bore = 50mm

  rate this moped part be the first!