genuine dellorto PHBG carburetor needles
dellorto PHBG carburetor needles
 
  $7.99



dellorto needle size



qty:  
 
 
for use in all dellorto PHBG carburetors. change your performance,
to fat? to lean? change it!

the thickness and taper of the needle will determine in combination with everything else, when and how much. get it.

we normally carry - W3, W4, W5, W6, W7, W8, W9, W10, W11, W12, W13, W14, W16, W17, W18, W19, W20, W21, W22, W23, W24, W25, W26 and D50. if they're not there in the drop down then we will have em in a week or so.

NOTE!!! if the size/color/make that you want is not showing up in the drop down menu above, that means it's out of stock for now. you'll have to find an alternate size/color/make or wait til the one ya want is back in stock! sry!

taco rating taco rating 5 of 5 5 of 5 Total Reviews: 5 give your taco rating here

  0 taco eaters like this review
 
5 of 5 Listing Of Needle Taper Angles July 12, 2022
taco eater : Michael Forrest from Jackson Heights, NY United States  
I did the calculations and redid all the Dellorto needle listings to include the taper angles. This is important because the bigger the angle, the "richer" the needle will make the jetting at mid throttle.
Here's my page with the listings: https://dragonfly75.com/moto/jettingDellOrto2.html

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 It's all about fine tunning May 27, 2016
taco eater : Countryobtunning from Princeton , MA United States  
These needles are made for fine tunning so be very careful. When going leaner on gas, I read some where to use high octane during testing for extra insurance. Don't mess around read the charts first

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 excellent February 8, 2013
taco eater : rg from KY, us  
excellent.  uhhhhh.
oh yea.  that old tractor is wrong.  you have to find it.  but i wont tell!!!!!.   they got the wrong dimensions.  check elsewhere, but no there.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 That old Tractor! July 11, 2012
taco eater : Dave from Michigan  
This Old Tractor changed the URL

http://www.thisoldtractor.com/gtbender/dellorto_slide_needle.htm#gtb_slide_needle_specifications_for__phbg_motorcycle_carburetors_-w_slides-

Was this review helpful to you?

  4 taco eaters like this review
 
5 of 5 Here's the link to a chart with the values for eac July 30, 2011
taco eater : Michael Williams from Austin, TX United States  
http://www.thisoldtractor.com/gtbender/print/dellorto_slide_needle_slide_needle_specifications_for_phbg_carburetors_-w_slides-.htm

Was this review helpful to you?