Return to tomos BLACK side kickstand left side mounting for SQUARE swing arms - 9"
 :
page of 1


  1 taco eaters like this review
 
5 of 5 9" Tomos kickstand Tuesday, June 23, 2020
taco eater : Gary Cooper Jr. from Terre Haute, IN United States  
Slapped it on the Streetmate soon as it came in,
Looks clean with a nice lean...

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Minor mods make this perfect for Streetmate Thursday, January 12, 2017
taco eater : Anonymous Person from NJ United States  
The bracket is too small to mount on the Streetmate's large swing arm. Don't mount it there, instead use a dremel and cut the welds to remove the bracket and grind smooth.  Once the bracket is off, remove the original kickstand.  The long vertical kickstand mount has a small hole about 4" up.  put a bolt into that and into one of the top holes on the kickstand (I used top right), Drill another hole that will line up with one of the bottom holes (I used bottom left) on the kickstand and this bracket fits perfectly.  It will give your bike a healthy lean (not too much like if you mount it on the swingarm because it will mount about an inch and a half lower!) and it will feel more natural when kicking it down as it's in the same place on the left side of the bike that the old kickstand was on.   It clears the tire by about 3/4" and looks sleek AF.  Perfect fit for mounting it onto the old kickstand mount if you're into a little drilling and grinding.  1 hour of work time is enough.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 leaning like an og! Thursday, May 21, 2015
taco eater : Kenmore from CT United States  
This kickstand is the cats meow! Not only can I take my turns sharper but, I get all the attention from the ladies now! It will boost your confidence ten fold! And I had not one issue bolting this up to my 10' sprint. Not one mod, it practically jumped out of the box, introduced itself, and threw itself on! Shortly after rading my fridge and screwingwith the cat. I'd give it ten tacos if I could! Oh ya! It must add horsepower because I was all of a sudden hitting 60mph!!! You want this, you need this, have you bought it yet???

Was this review helpful to you?

  0 taco eaters like this review
 
3 of 5 some modification required Sunday, May 10, 2015
taco eater : Lia Williams from Hana, HI United States  
1 - grind off the upper section of the U-bracket
2 - grind out the holes so the U-bolts fit in the right spot
3 - cut the leg and lengthen by brazing in ~5" rod stock to lengthen it by ~1.5"
4 - repaint it

and now it fits and is awesome for trying to park on all sorts of ground.  i worry it may be bending sometimes but it's still way stronger than the centrestand which always breaks under the weight of the streetmate.  I keep the centrestand and use either one for different situations.

Was this review helpful to you?

  0 taco eaters like this review
 
4 of 5 Leans Far Friday, January 2, 2015
taco eater : Josh Sky from Allendale, NJ United States  
Had to cut off the lower part of the C bracket to make a L Bracket. Now its on beautifully! I wish it was an inch longer leans very far down but its stable. lighter than the OEM middle kickstand. looks sick tho!!!

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 With a little work this is perfect for a hobbit. Monday, August 18, 2014
taco eater : Joshua Smith from Ottawa, IL United States  
I've suspected for years that with some minor modifications this would work perfect on my hobbit. Finally decided to snag one and after cutting off the c shaped piece and drilling a couple new holes more towards the center of the bracket my hobbit now has a kick stand.

Here's a couple pics showing where I mounted it and how it looks.

http://i.imgur.com/O9rJFX6.jpg

http://i.imgur.com/Q0ShlZ9.jpg

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Works Great Tuesday, August 5, 2014
taco eater : J from Worcester, MA United States  
Works perfect on my 91 Tomos Golden Bullet TT LX and my brothers 94 Targa step through. Kinda wish it was half an inch or so taller at times though.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Requires a little work Monday, April 21, 2014
taco eater : Will from Richmond , VA United States  
There is a small piece of "c" channel welded on the back that is too small for the swing arm on the streetmate but I managed to do a little sawzalling and filing down of the top part of the "c" channel to make an "L" bracket and still brace the kickstand. The holes also needed to be drilled out or moved up a little to accept the "u" bolt but the look is incredible and I can actually lean on a turn without grinding the center stand on the asphalt. Love this item. Just be ready to do a little but of work. Maybe took me an hour to manipulate this one and remove the center stand.

Was this review helpful to you?

  2 taco eaters like this review
 
4 of 5 Modify for Streetmate R Monday, April 15, 2013
taco eater : Gman from longisland  
This does not fit all tomos square arm peds. I had to sawsall the back plate to custom fit to a Streetmate R because the square arm was bigger than the square plate on the kickstand. All I can say it was worth it because the look is great, real sexy looking moped by the way it leans. Reminds of a women in heals and stockings if you get my drift.


Was this review helpful to you?