Return to pietcard CDI internal coil - 03 - ducati CEV bosch stihl - counterclockwise
 :
page of 1


  0 taco eaters like this review
 
4 of 5 Works on NOI February 22, 2021
taco eater : Dan P from MN United States  
As Alan mentioned below, you need to turn the stator plate to the other set of screw holes. Once you do that, you'll be rippin!

https://i.imgur.com/2JubEco.jpg

EDIT: upon further review, you may not actually be able to time it quite right with the above. I ended up ditching the woodruff and timing it manually. This may be necessary to get it timed right on. Beware!

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Works Great on NOI August 21, 2018
taco eater : Alan from Washington, DC United States  
The guy below me is a ding dong.

There is another set of holes on the NOI case that the stator can line up with. Magically, rotating the plate about 60° will expose the secret garden or holes. Go forth and feast upon the fruit of the Italian mountainside.

I have been running this coil with a puch hi RPM box/coil for about 2 years. It works without flaw.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Too advanced for Garelli NOI June 27, 2018
taco eater : Johnathon Bartell from Sacramento, CA United States  
76 Garelli Eureka NOI. Fat blue spark but no boom. I tried the 2013CDI and the 2041. Even put in new woodruff key. Spark is  Waaaaay too advanced. (60 degrees according to timing light) going to try the White coil next.

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Rizzato 122 March 24, 2015
taco eater : Ben Schulz from Detroit, MI United States  
These coils will also work with the case inducted 122 califfo 80 and califfone motors. The white one would spark but not fire at the correct time. Green one with 2013 boxes works GREAT.

Was this review helpful to you?

  0 taco eaters like this review
 
4 of 5 perfecto on franco morini March 16, 2014
taco eater : brenton w from michigan aka hoth.  
fits perfect on my counter clockwise FMM1 like a dream!

mine is equipped with cev flywheel # 6420

It only needed minimal grinding on the face of the stator plate so the wires did not get pinched in back when i tightened everything up.

fits great, runs great- affordable performance!


Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 The Dpc say it all good !! May 2, 2012
taco eater : Walt Ottaviano from Sarasota, FL United States  
So Easy a blind man can do it !! Great alternitve to sexy points set up

Was this review helpful to you?

  2 taco eaters like this review
 
4 of 5 blasty blast September 30, 2011
taco eater : Anonymous Person from NC  
Super easy install. If you have the Garelli NOI w/ CEV flywheel then look no further. Pop this baby on there and bam.. 12v of awesome. Join it with the e50 high rev box for even more fun times.

Was this review helpful to you?